Kensington logomacOS Fingerprint Provisioning Tool for VeriMark Guard
User GuideKensington macOS Fingerprint Provisioning Tool for VeriMark Guard

macOS Fingerprint Provisioning Tool for VeriMark Guard

Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard 1macOS Kensington Fingerprint Provisioning Tool for VeriMarkTM Guard

  1. Download the macOS fingerprint tool from the support site
  2. Go to Finder window and open the Download folder
  3. Right click and open or double click on the downloaded file KensingtonFingerprintApp2_0_5.dmg
  4. The following window will pop-upKensington macOS Fingerprint Provisioning Tool for VeriMark Guard fig 11
  5. Drag the “ctapfma” file to the Applications folder
    Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard fig 1
  6. Connect the VeriMark Guard to the macOS device on any USB port prior to opening the recently installed tool
  7. Open the Application folder and look for the icon of the tool “Ctapfma”. Double click the icon to run the application.
    a. If the app fails to run and returns the following message, grant permission to run unidentified developers using the steps provided on Apple support website. Make sure to select your macOS version from the dropdown list.
    b. Alternatively, hold the control key on the keyboard and click on the icon and click open
    Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard fig 2c. Once permission has been granted click Open on the next window.
    Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard fig 3
  8. If the VeriMark Guard is not connected to macOS device the fingerprint provisioning tool will display the following message. Make sure you connect VeriMark Guard to a USB port, exit the tool and start at step 6 again.
    Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard fig 4
  9. Type a PIN to begin registering your fingerprints on the VeriMark dongle
    Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard fig 5
  10. You can also reset the dongle
    Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard fig 6
  11. Or change your previously saved PIN
    Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard fig 7
  12. Click on the blue arrow next to the PIN to begin fingerprint registration process
    Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard fig 8
  13. Select the fingerprint you want to enroll and Tap the sensor area multiple times until the fingerprint enrollment is completed. Follow screen instructions
    Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard fig 9
  14. The tool will display the following window once a successful fingerprint enrollment is done. Click Ok and repeat step 13 to add another finger.
    Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard fig 10
  15. Once the fingerprint enrollment finish. The tool will display a window showing which fingers have been enrolled. You can also remove all or simple close the tool to finish enrollment.Kensington logo

Documents / Resources

Kensington macOS Fingerprint Provisioning Tool for VeriMark Guard [pdf] User Guide
macOS Fingerprint Provisioning Tool for VeriMark Guard, macOS Fingerprint Provisioning Tool, VeriMark Guard

References

Leave a comment

Your email address will not be published. Required fields are marked *