Keith Jack Ring Sizer

INSTRUCTIONS
Paper Sizing Tool
- Print and cut out the ring sizer. Cut along the slit marked with an arrow.
- Insert the pointed end through the slit so that the numbers face outward.
- Wrap the ring sizer around your finger and pull the ends tight, like fastening a belt.
- Read your size where the “Read Size” marker lines up with the end of the sizer.

Ring Tool
If the finger isn’t available for measuring (for example, as a surprise gift), use a ring from the person’s jewelry collection. Place the ring on the circles in the chart below, aligning it with the inner edge. The correct circle size should match the inside of the ring.

Floss/String Tool
To measure your finger, wrap a piece of string around it. Mark the point where the string overlaps to complete one full loop, then use the chart below as a reference for your size. If you already have a ring that fits, you can also measure its inner diameter with a ruler, and then use that measurement to determine your ring size.
| US
Ring Size |
Circumfrence:
(millimeters) |
Circumfrence:
(Inches) |
Diameter:
(millimeters) |
Diameter:
(inches) |
| 4 | 46.5 mm | 1.83 inches | 14.9 mm | 0.59 inches |
| 5 | 49.0 mm | 1.93 inches | 15.7mm | 0.62 inches |
| 6 | 51.5 mm | 2.02 inches | 16.5 mm | 0.65 inches |
| 7 | 54.4 mm | 2.14 inches | 17.3 mm | 0.68 inches |
| 8 | 57.3 mm | 2.26 inches | 18.2 mm | 0.72 inches |
| 9 | 60.3 mm | 2.37 inches | 19.0 mm | 0.75 inches |
| 10 | 62.8 mm | 2.47 inches | 19.8 mm | 0.78 inches |
| 11 | 65.3 mm | 2.57 inches | 20.6 mm | 0.81 inches |
| 12 | 67.6 mm | 2.66 inches | 21.4mm | 0.84 inches |
| 13 | 70.6 mm | 2.78 inches | 22.2 mm | 0.87 inches |
| 14 | 73.7 mm | 2.90 inches | 23.0 mm | 0.91 inches |
| 15 | 76.2 mm | 3.00 inches | 23.8 mm | 0.94 inches |
Specifications
- Brand: Keith Jack Jewelry
- Product: Ring Size Guide
- Tools Included: Paper Sizing Tool, Ring Tool, Floss/String Tool
- Measurement Units: Millimeters (mm) and Inches
FAQ
How do I know which tool to use?
If you have a ring available, use the Ring Tool. If not, you can use either the Paper Sizing Tool or Floss/String Tool for accurate measurements.
Can I measure my ring size without any tools?
If you have a ring that fits, you can measure its inner diameter with a ruler and use that measurement to determine your ring size.
Keith Jack Jewelry
21 Lonsdale Ave, North Vancouver, BC V7M 2E4
(604) 924-7718
keithjack.com

Documents / Resources
![]() | Ring Sizer |
References
- keithjack.comkeithjack.com
- User Manualmanual.tools

