Contents hide
1 Bosch 100 Series Top Control Towel Bar Handle Dishwasher with Energy Efficient PureDry System
2 INTRODUCTION
3 Getting started
4 Cycles
5 General maintenance
6 FAQ’s
7 References

Bosch-Logo

Bosch 100 Series Top Control Towel Bar Handle Dishwasher with Energy Efficient PureDry System

Bosch-100-Series-Top-Control -Towel-Bar-Handle-Dishwasher-with-Energy0-Efficient-PureDry-System-Product

INTRODUCTION

The Bosch 100 Series Top Control Towel Bar Handle Dishwasher features the energy-efficient PureDry system, providing excellent drying performance without the need for added heat. Designed for quiet operation, it ensures a thorough clean with its multiple wash cycles while maintaining energy efficiency. The sleek top control panel and towel bar handle add a modern touch to any kitchen.

Getting started

How to Turn it on or off

  1. Turn the water supply on.
  2. Push the On/Off button to turn the appliance on.Turn-it-on-or-off-Fig- (1)
  3. Push the Start button to start your selected program.Turn-it-on-or-off-Fig- (2)
  4. Push the On/Off button to turn the appliance off.

Turn-it-on-or-off-Fig- (3)

Cycles

How to Cancel an ongoing cycle

  1. Push and hold the Start button for 3 seconds.Cancel-an-ongoing-cycle-Fig- (1)
  2. Wait for the dishwasher to drain. This will take approximately 1 minute.Cancel-an-ongoing-cycle-Fig- (2)
  3. Push the On/Off button.

Cancel-an-ongoing-cycle-Fig- (3)

How to Pause a cycle

  1. Push the On/Off button.Pause-a-cycle-Fig- (1)
  2. The LEDs will turn off.Pause-a-cycle-Fig- (2)
  3. Push the On/Off button to continue the wash cycle.

Pause-a-cycle-Fig- (3)

General maintenance

How to Clean the appliance

  1. Clean the front of the appliance with a damp cloth and a mild liquid detergent.Clean-the-appliance-Fig- (1)
  2. Dry with a soft cloth.Clean-the-appliance-Fig- (2)
  3. Regularly clean the outer edges of the inside door panel with a damp cloth.Clean-the-appliance-Fig- (3)
  4. Regularly clean the door seal with a damp cloth.Clean-the-appliance-Fig- (4)

Please note:
For stubborn stains use a mild liquid detergent. Do not use any abrasive materials or harsh chemicals.

How to Clean the filter

  1. Open the door.Clean-the-filter-Fig- (1)
  2. Remove the bottom rack.Clean-the-filter-Fig- (2)
  3. Unscrew the filter system.Clean-the-filter-Fig- (3)
  4. Remove the filter system.Clean-the-filter-Fig- (4)
  5. Remove the microfilter from the fine filter.Clean-the-filter-Fig- (5)
  6. Rinse both filters under running water.Clean-the-filter-Fig- (6)
  7. Clean the filters with a soft brush.Clean-the-filter-Fig- (7)
  8. Insert the microfilter into the fine filter.Clean-the-filter-Fig- (8)
  9. Insert the filter system into the dishwasher.Clean-the-filter-Fig- (9)
  10. Turn the filter system until the marking arrows align to lock it into place.Clean-the-filter-Fig- (10)
  11. Reinsert the bottom rack.
  12. Close the door.

Please note:
Do not use abrasive materials to clean the filter.

How to Fill with Rinse Aid

  1. Push the latch in.Fill-with-rinse-aid-Fig- (1)
  2. Open the rinse aid dispenser.Fill-with-rinse-aid-Fig- (2)
  3. Pour rinse aid into the dispenser, making sure not to overfill.Fill-with-rinse-aid-Fig- (3)
  4. Close the rinse aid dispenser.Fill-with-rinse-aid-Fig- (4)
  5. Use a cloth to clean up any spilt rinse aid.

Fill-with-rinse-aid-Fig- (5)

Please note:
Avoid pouring any rinse aid into the vent hole.

FAQ’s

How do I cancel an ongoing cycle on the Bosch 100 Series Dishwasher?

Hold the Start button for 3 seconds, wait for the dishwasher to drain, and then turn it off.

How do I clean the filter in the Bosch 100 Series Dishwasher?

Remove the bottom rack, unscrew and rinse the filter under water, then reinsert it once cleaned.

References

Leave a comment

Your email address will not be published. Required fields are marked *