Smart Music Boxing Target Instruction Manual
Model: MBT10
Manufacturer: Jinhua Gordon Sports Co., Ltd.
Precautions
- Please fix the product on a solid and reliable wall. When hitting, strike the designated area and avoid the corner areas to prevent hand injury or equipment damage.
- This product is suitable for adults. Children should use it under adult supervision.
- Beginners should not strike with excessive force to avoid hand injury. Prioritize safety during exercise. It is strictly forbidden to hit legs and knees.
- Do not hit the horn area.
- If the device cannot be turned on or is abnormal, check if the power is too low. Charge the device promptly. Charging time should not exceed 8 hours. For long-term use, it is recommended to charge once every 1-2 months.
- This product is not waterproof. Wipe the boxing target with a dry cloth; do not use water.
- Please keep these instructions for emergency use.
Product Description
The Smart Music Boxing Target includes the following components:
- ① Loudspeaker
- ② Impact Point
- ③ Horse Race Lamp
- ④ Lamp Ring
- ⑤ Hook the Point
- ⑥ USB Charging Port
- ⑦ Operating Interface
[Visual description: An image shows the boxing target with numbered callouts pointing to its features: loudspeaker, impact point, horse race lamp, lamp ring, hook point, USB charging port, and operating interface.]
Installation For Use
Bluetooth Name: GDBX- [Serial Number, 6 alphanumeric characters A-F]
- Switch On/Off: Long press the Mode button for 2 seconds to switch the machine on or off. The machine will automatically shut down if Bluetooth is not connected and there is no operation.
- Volume Control: Long press the Speed button to decrease volume; long press the Mode button to increase volume.
- Mode Selection: Press the Mode button to cycle through P01-P09 (9 modes). P01 is a random mode; others are fixed patterns.
- Speed Selection: Press the Speed button to select HAU, H01-H09 (10 speeds). HAU is the music rhythm mode; others are fixed speeds.
- Sound Switch: Press the button to turn the impact sound on or off.
- Play/Pause: After connecting Bluetooth, short press the power button to control Bluetooth music playback.
- Next Music: Short press to switch to the next music track.
- Charging: Connect the charger. The battery icon will increase incrementally. When the battery is full, the icon will flash.
- Low Battery Warning: When the device battery is low, the display will flash to prompt charging.
- Power Out: If the power is completely depleted, key operations will not respond. The device must be charged to a sufficient level before it can be turned on.
Installation Notes
Installation Way 1: Bracket Installation (Most Secure)
- Holes No. 1, 2, 3, and 4 are for mounting brackets.
- First, secure the back of the boxing target using holes No. 2 and No. 3 with flat head screws.
- [Visual description: Diagram showing the back of the target with holes labeled NO.1, NO.2, NO.3, NO.4.]
- Mark holes No. 1 and No. 4 on the wall. Drill the holes using an impact drill and fix the bracket to the wall with expansion screws.
- Before using the product, ensure the installation is firm.
Installation Way 2: Hook and Loop Fastener Installation
- Align and paste the hook and loop fasteners with glue on the back of the product.
- Peel off the double-sided tape on the top half of the fastener.
- Align the position with the wall and stick it firmly.
- [Visual description: Diagram showing hook and loop fasteners being applied to the back of the target and then attached to a wall.]
Troubleshooting
| NO. | Symptoms | Cause Analysis | Method of Exclusion |
|---|---|---|---|
| 1 | No lights and no sound | The product is not powered on | Short press the switch. |
| 2 | No lights and no sound | Battery drain | Charge. |
| 3 | Lights flicker | Low battery | Charge. |
| 4 | Cannot turn on after short pressing the switch | The main chip capacitor is short of power due to long-term non-startup. | Repeatedly short press the switch. |
| 5 | Banging sound inside the device | Issued by the internal active stress structure | Normal phenomenon. |
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.