WOBANE CL15 Hand Wave Activated Under Cabinet Light Bar User Manual

1. შესავალი

Thank you for choosing the WOBANE CL15 Hand Wave Activated Under Cabinet Light Bar. This LED light bar is designed to provide bright, dimmable illumination for various indoor spaces such as kitchens, shelves, cupboards, closets, workbenches, and cabinets. Its hand wave activation feature offers convenient, touch-free operation, and the aluminum construction ensures durability and efficient heat dissipation.

ძირითადი მახასიათებლები მოიცავს:

• Hands-free and Dimming Function: Control the light with a simple hand wave. Wave once to turn ON/OFF, and hold your hand above the sensor to dim the brightness from 8% to 100%.
• სუპერ ნათელი განათება: Delivers 280 lumens with a 6000K white pure glow, ensuring a bright and comfortable lighting area.
• მარტივი ინსტალაცია: Offers two installation methods: screws for rough wood surfaces or strong adhesive tapes for smooth surfaces.
• ენერგიის დაზოგვა: Low 5-wattage consumption for efficient lighting.
• სანდო კონსტრუქცია: Features an aluminum housing and a quality adapter for good heat dissipation and extended lifespan.

2. რა არის ყუთში

ინსტალაციის გაგრძელებამდე დარწმუნდით, რომ ყველა კომპონენტი ხელმისაწვლელია.

• WOBANE CL15 LED Light Bar
• AC Adapter (1.5m power cable)
• სამონტაჟო ხრახნები
• Adhesive Tapes (3M)
• Mounting Brackets (Clips)

3. დაყენება და ინსტალაცია

The WOBANE CL15 offers two primary installation methods: adhesive tape for smooth surfaces and screws for more permanent mounting on rough wood.

3.1. Adhesive Tape Installation (for smooth surfaces)

1. ზედაპირის გაწმენდა: Ensure the mounting surface is clean, dry, and free of dust or grease for optimal adhesion.
2. Attach Adhesive Tapes: Peel off the protective backing from the 3M adhesive tapes and firmly press them onto the back of the light bar, typically near the ends.
3. სინათლის ზოლის დამონტაჟება: Peel off the remaining backing from the adhesive tapes on the light bar. Carefully align the light bar with your desired mounting location and press firmly for at least 30 seconds to secure it.

3.2. Screw Installation (for rough wood surfaces or permanent mounting)

1. მონიშნეთ სამონტაჟო წერტილები: Hold the light bar in the desired position and mark the locations for the mounting brackets.
2. სამაგრების დაყენება: Use the provided screws to attach the mounting brackets to the marked points. Ensure the brackets are securely fastened.
3. Attach Light Bar: Snap the light bar into the installed mounting brackets. Ensure it is securely seated.

3.3. დენის კავშირი

1. დენის კაბელის დაკავშირება: Plug the power cable from the AC adapter into either end of the light bar. The light bar is designed to be powered from both ends for flexibility.
2. შეერთეთ განყოფილებაში: შეაერთეთ AC ადაპტერი სტანდარტული კედლის განყოფილებაში.

4. საოპერაციო ინსტრუქციები

The WOBANE CL15 features an intelligent IR sensor for hands-free operation.

4.1. ჩართვა/გამორთვა

• ჩართვისთვის: Wave your hand once under the sensor (located on the light bar).
• Გამორთვა: Wave your hand once again under the sensor.

4.2. Dimming the Light

• დაბინდვამდე: With the light ON, hold your hand steadily under the sensor. The brightness will gradually adjust between 8% and 100%. Release your hand when the desired brightness level is reached.

5. მოვლა

To ensure the longevity and optimal performance of your WOBANE CL15 light bar, follow these simple maintenance guidelines:

• დასუფთავება: Gently wipe the light bar with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
• სენსორის მოვლა: Keep the hand wave sensor area clean and unobstructed to ensure proper functionality. Dust or debris on the sensor may affect its responsiveness.
• დენის გათიშვა: Always unplug the light bar from the power outlet before cleaning or performing any maintenance.
• მოერიდეთ წყლის ზემოქმედებას: This product is designed for indoor use and is not water-resistant. Avoid exposing it to water or high humidity.

6. Დიაგნოსტიკა

If you encounter any issues with your WOBANE CL15 light bar, please refer to the following troubleshooting tips:

• შუქი არ ინთება:
  • Ensure the AC adapter is securely plugged into both the light bar and a working wall outlet.
  • შეამოწმეთ, მუშაობს თუ არა დენის წყარო სხვა მოწყობილობის ჩართვით.
• Hand Wave Sensor Not Responding:
  • Ensure there are no obstructions directly in front of or above the sensor.
  • Try waving your hand slowly and steadily within 1-2 inches of the sensor.
  • Clean the sensor area to remove any dust or smudges.
• Light Flickers or Dims Unexpectedly:
  • This could be due to interference with the sensor. Ensure no objects are constantly moving near the sensor.
  • შეამოწმეთ სტაბილური კვების წყარო.
• Light is Not Bright Enough:
  • Use the dimming function (hold hand under sensor) to increase brightness to 100%.

If these steps do not resolve the issue, please contact WOBANE customer support for further assistance.

7. სპეციფიკაციები

8. გარანტია და მხარდაჭერა

WOBANE is committed to providing high-quality products and customer satisfaction. For any warranty claims, technical support, or inquiries regarding your CL15 Hand Wave Activated Under Cabinet Light Bar, please contact WOBANE customer service through the retailer's platform or the official WOBANE webსაიტი.

გთხოვთ, შეინახოთ შეძენის დამადასტურებელი საბუთი გარანტიის მიზნებისთვის.