SUPERNIGHT RGB LED Light Strip Remote Controller Instruction Manual

პროდუქტი დასრულდაview

The SUPERNIGHT 44 Key Wireless IR Remote Controller is designed to provide versatile control over your SMD 5050, 3528, and 2835 RGB LED light strips. This controller allows for a wide range of color selections, brightness adjustments, and dynamic lighting effects, enhancing the ambiance of any space.

Image: The SUPERNIGHT 44 Key Wireless IR Remote Controller shown alongside its white control box, which connects to the LED strip.

ძირითადი მახასიათებლები:

• მრავალფუნქციური: Offers 20 static colors and 5 dynamic light patterns including Static, Flash, Strobe, Fade-change, and RGB Smooth-change.
• მორგება: Easily turn ON/OFF, DIY colors, and adjust brightness levels.
• თავსებადობა: Works with SMD 5050, 3528, and 2835 RGB LED light strips that use 4-Pin connectors. Not compatible with RGBW strips (5-pin connectors).
• IR დისტანციური: Infrared remote control with an effective range of approximately 30 feet. Requires direct line-of-sight to the IR receiver.
• უსაფრთხოება: Input DC 12V, Max output current 12A. CE, RoHS, FCC certified for low voltage, low heat, and no radiation.

Image: A close-up of the 44-key remote controller, highlighting the various color selection buttons, brightness controls, and mode buttons (Flash, Strobe, Fade, Jump).

დაყენების ინსტრუქციები

1. მოამზადეთ დისტანციური:

   Before first use, remove the clear plastic film from the battery compartment of the remote control. The remote uses a CR2025 coin cell battery.

   

   Image: A hand pulling a clear plastic tab from the battery slot of the remote control, indicating the battery is ready for use.
2. Connect the LED Strip to the IR Controller:

   Ensure the 4-pin connector from your RGB LED light strip is correctly aligned with the 4-pin port on the IR control box. Look for the arrow symbol on both the strip connector and the control box connector and align them for proper connection. Incorrect alignment will prevent the lights from illuminating.

   

   Image: A close-up showing the 4-pin connector of an LED strip being inserted into the IR control box, with arrows indicating correct alignment.

3. Connect Power to the IR Controller:

   Plug the DC 12V power adapter (not included with this remote controller, but typically comes with LED strip kits) into the DC input jack on the IR control box.

   

   Image: A hand plugging a black DC power adapter into the white IR control box.

4. Position the IR Receiver:

   Ensure the small black IR receiver eye, which is attached to the control box, is exposed and has a clear line of sight to where you will be using the remote. Obstructions will block the signal.

   

   Image: The remote control is shown pointing towards the small black IR sensor, emphasizing the need for direct line of sight for the remote to function.

ვიდეოს დაყენების სახელმძღვანელო:

ოპერაციული ინსტრუქციები

The 44-key remote offers comprehensive control over your LED light strip. Familiarize yourself with the button layout for optimal use.

Image: An annotated diagram of the 44-key remote, explaining the function of each button, including color selection, brightness, and dynamic modes.

• ჩართვა/გამორთვა: გამოიყენეთ ON და გამორთულია buttons at the top right to power the lights.
• სიკაშკაშის რეგულირება: გამოიყენეთ V+ და V- buttons (top left) to increase or decrease the brightness of the lights.
• სტატიკური ფერის შერჩევა: The remote features 20 pre-set static colors. Simply press the desired color button to change the LED strip's color.
• დინამიური რეჟიმები:
  • ფლეში: სწრაფად იცვლის ფერებს.
  • სტრობი: Flashes a single color.
  • FADE3/FADE7: Smoothly transitions between 3 or 7 colors.
  • JUMP3/JUMP7: Jumps between 3 or 7 colors.
  • სწრაფი/ნელი: Adjusts the speed of dynamic modes.
  • ავტო: Cycles through all dynamic modes automatically.
• DIY Color Creation:

  The remote allows you to create and save up to 6 custom colors using the DIY buttons (DIY1-DIY6).

  1. დააჭირეთ ერთ-ერთს წვრილმანი buttons (e.g., DIY1).
  2. Use the Red, Green, and Blue arrow buttons (↑ / ↓) to adjust the intensity of each primary color until you achieve your desired custom color.
  3. დააჭირეთ იგივე წვრილმანი button again to save the custom color.
  4. To recall your saved custom color, simply press the corresponding წვრილმანი ღილაკი.

Image: A hand holding the remote control, demonstrating its use to change the colors of an LED strip installed behind a television, illustrating its application in home lighting.

მოვლა

• ბატარეის გამოცვლა: If the remote's response becomes sluggish or stops working, replace the CR2025 coin cell battery. Refer to the setup instructions for battery compartment access.
• დასუფთავება: Wipe the remote and control box with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• შენახვა: დიდი ხნის განმავლობაში არ გამოყენების შემთხვევაში, შეინახეთ პულტი გრილ, მშრალ ადგილას, მზის პირდაპირი სხივებისა და ექსტრემალური ტემპერატურისგან მოშორებით.

პრობლემების მოგვარება

სპეციფიკაციები

გარანტია

This SUPERNIGHT product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

მხარდაჭერა

For further assistance, technical support, or warranty inquiries, please visit the official SUPERNIGHT store on Amazon or contact their customer service directly through the Amazon platform.

Visit the SUPERNIGHT Store on Amazon