Dokumen

OWLLON TNS-0117 Dobe Wireless Gamepad Kanggo Nintendo Switch Pro Controller User Manual
OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Pambuka Produksi:

This controller is of Bluetooth wireless type, which is mainly used with N-S console. The aisle light of the controller is assigned through the console. This product is available in motor vibration and sensor functions, and it supports the connection to PC console via USB so as to achieve PC XINPUT function

Diagram Produk:

Diagram Produk
Diagram Produk

Function Diagram:

Jeneng Fungsi Is there a function? ujar
Sambungan kabel USB Ya  
Sambungan Bluetooth dhukungan  
Mode sambungan N-S PC mode  
Six-axis gravity induction Ya  
Kunci Ya  
Kunci B Ya  
Kunci X Ya  
kuncine Y Ya  
- kunci Ya  
+ kunci Ya  
Kunci L Ya  
Tombol R Ya  
tombol ZL Ya  
tombol ZR Ya  
Tombol omah Ya  
Print Screen key function Ya  
Joystick 3D (fungsi joystick 3D kiwa) Ya  
Tombol L3 (fungsi tombol tekan joystick 3D kiwa) Ya  
R3 key (right 3D joystick press key function) Ya  
Cross key function Ya  
TUBRO speed regulation function Ya  
Connecting indicators Ya  
Motor vibration intensity adjustment Ya  
Nganyarke controller dhukungan  

Mode and Pairing Instruction:

  • 1. N-S wired connection mode:
    1. Before use the wired connection, please confirm the N-S console system: “set up” -> “controller and inductor” -> “wired connection of Pro controller” in “on” state.
    2. The controller is connected to the N-S base via USB cable so as to be used as the wired controller, and the corresponding indicator light of the controller will flash slowly; when you plug out the USB cable, the controller turns into wireless mode and connect the console automatically!
  • 2. N-S wireless connection mode:
    1. Before use the wireless connection, please confirm that the N-S console system turns to: “controller” -> “ change grip/order” in pairing state.
    2. Long press the code key of the controller for 3 seconds to enter into Bluetooth search mode, and the LED indicator light will flash in marquee type.
      The corresponding channel indicator light will be on after successful connection.
  • 3. PC-360, PC mode:
    Firstly, please download the PC 360 to Windows computer. After the PC 360 is installed, the controller should be connected to the computer via USB cable, and the corresponding channel indicator light will be on after successful connection. The LED2 and LED3 will be on when the No.1 and No.10 keys are pressed simultaneously to switch to PC mode.
  • 4. Back connection and shutdown instruction:
    1. Short press the Bluetooth code key to shutdown the controller.
    2. Press Home to wake up the controller. The awakened controller will automatically back connect the console which has been paired previously; it will switch to auto sleep if the back connection is not successful within 8 seconds.

Charging Indication and Charging Characteristics:

During the charging of the controller: the charging LED indicator light will be on, and it will be off after the controller is fully charged.

Turu Otomatis:

  • Connect N-S mode: the N-S console screen is off or shut down, and the controller automatically disconnects and switch to sleep mode.
  • Bluetooth connection mode: the Bluetooth disconnects and switches to sleep mode after the Bluetooth code key is pressed shortly.
  • Without any keys pressed within 5 min, it will switch to auto sleep mode (including gravitational induction immobility). Remarks: there is no auto sleep currently

TURBO Function Settings:

  • Setelan fungsi TURBO semi-otomatis: penet tombol TURBO banjur setel minangka tombol fungsi TURBO kaya sing dibutuhake, banjur sampeyan bisa ngrampungake setelan kanthi sukses.
  • Full-automatic TURBO function setting: press TURBO key and then press the key which has been set up with the semi-automatic TURBO function.
  • Keys available for TURBO function settings: A key, B key, X key, Y key, + key, – key, L key, R key, ZL key, ZR key, “cross” key (up, down, left and right), L3 key (left 3D joystick press key) and R3 (right 3D joystick press key).
  • Busak tombol fungsi TURBO sing wis disetel:
    • Clear TURBO function of single key: press TURBO key + key set up with TURBO function for quick clear.
    • Shut down the automatic firing function: you should short press the – key and down arrow key once, and the controller will vibrate once to execute the command, then the automatic firing function of all keys will be turned off.
  • Regulation methods of automatic firing speed:
    • A. Increase automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been up regulated by one gear successfully.
    • B. Reduce automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been down regulated by one gear successfully.
    • C. The automatic firing function is memorable. If the console is connected after the controller is disconnected, the automatic firing speed set up previously can be memorized.

Motor Vibration Regulation:

3 gears in total: weak, intermediate and strong (the changed amplitude is 40%, 70% and 100%) regulation methods:

  • Lowest gear (40% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Intermediate gear (70% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Top gear (100% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • The intermediate gear of controller vibration is acquiescently connected for the first time, i.e. 70% amplitude.

USB Connection Function:

  • The wired N-S and PC XINPUT mode connection is supported.
  • It is automatically identified as N-S mode when connected to N-S console.
  • It is in XINPUT mode when connected to PC.

Parameter Listrik:

item Nilai referensi
Makarya voltage DC 3.6-4.2V
Saiki aktif 24mA
Saiki turu 22.5uA
Vibration current 82 mA~130 mA
Daya input DC 4.5~5.5V/400mA
kapasitas batere 500mAh
Jarak operasi 10m

3D Joystick Instruction:

  • The 3D joystick is not required to be calibrated manually on N-S console. The 3D joystick will be calibrated automatically when the N-S console is plugged.
  • If the 3D joystick drips during use, please replug and unplug the controller before use. Be careful not to touch the 3D joystick when you plug and unplug the controller.

Gyroscope Calibration Instruction:

Enter into the “N-S console setting – controller and inductor – calibration of gyroscope inductor” for controller test and calibration; place the controller horizontally on the desktop and long press + or – for calibration.

Controller Upgrade Instruction:

  • If this product cannot be used due to system compatibility and other reasons, please contact the customer service provider to provide program: install the upgrade package to upgrade.
  • Specific operation: plug the controller into the computer first, then press the X+Y+HOME for 3 sec to enter into the upgrade mode; and then open the Program.exe software, click update firmware to upgrade, and wait for the prompt for successful update.

Perkawis sing Perlu Dipentingake:

  • Produk iki kudu disimpen kanthi apik nalika ora digunakake.
  • Produk iki ora bisa digunakake lan disimpen ing lingkungan sing lembab.
  • Produk iki kudu digunakake utawa disimpen kanthi ngindhari bledug lan beban abot kanggo njamin umur layanan.
  • Aja nggunakake produk sing direndhem, tabrakan utawa rusak lan masalah kinerja listrik amarga panggunaan sing ora bener.
  • Aja nggunakake peralatan pemanasan njaba kayata oven microwave kanggo pangatusan.
  • Yen rusak, kirimake menyang departemen pangopènan kanggo dibuwang. Aja mbongkar dhewe.
  • Anak pangguna kudu nggunakake produk iki kanthi bener miturut tuntunan wong tuwa, lan aja ketagihan ing game kasebut.

Ati-ati FCC :

Piranti iki tundhuk karo bagean 15 saka Aturan FCC. Operasi kasebut tundhuk ing rong kahanan ing ngisor iki:

  1. Piranti iki bisa uga ora nyebabake gangguan, lan
  2. piranti iki kudu nampa gangguan sing ditampa, kalebu gangguan sing bisa nyebabake operasi sing ora dikarepake.

Pangowahan utawa modifikasi sing ora disetujoni kanthi jelas dening pihak sing tanggung jawab kanggo kepatuhan bisa ngilangi wewenang pangguna kanggo ngoperasikake peralatan kasebut.

Catetan: Piranti kasebut wis dites lan ditemokake tundhuk karo watesan kanggo piranti digital Kelas B, miturut bagean 15 Aturan FCC. Watesan kasebut dirancang kanggo nyedhiyakake perlindungan sing cukup kanggo gangguan sing mbebayani ing instalasi omah.
Piranti kasebut ngasilake panggunaan lan bisa ngetokake energi frekuensi radio lan, yen ora diinstal lan digunakake miturut instruksi, bisa uga nyebabake gangguan komunikasi radio. Nanging, ora ana jaminan manawa gangguan bakal kedadeyan ing instalasi tartamtu. Yen peralatan kasebut nyebabake gangguan ing radio utawa televisi, sing bisa ditemtokake kanthi mateni peralatan, pangguna disaranake nyoba mbenerake gangguan kasebut kanthi salah siji utawa luwih saka langkah-langkah ing ngisor iki:

  • Reorientasi utawa relokasi antena sing nampa.
  • Tambah pemisahan antarane peralatan lan panrima.
  • Sambungake peralatan menyang stopkontak ing sirkuit sing beda karo sing wis disambungake panrima.
  • Hubungi dealer utawa teknisi radio / TV sing duwe pengalaman kanggo njaluk bantuan.

Piranti kasebut wis dievaluasi kanggo memenuhi syarat cahya RF umum. Piranti kasebut bisa digunakake ing kahanan pajanan portabel tanpa watesan.

Dokumen / Sumber Daya

OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller [pdf] Manual pangguna
TNS-0117, TNS0117, 2AJJCTNS-0117, 2AJJCTNS0117, TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller, TNS-0117, Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Ninggalake komentar

Panjenengan alamat email ora bisa diterbitake.