MEAN WELL NPB-450 Series 450W High Reliable Ultra Wide Output Range Intelligent Battery Charger User Manual
fitur
- Patented auto ranging with ultra-wide charging voltage (10.5~21V,21~42V,42~80V, 54~100V; Please refer to page 8 for setting)
- Protokol CANBus sing dibangun kanggo kontrol, setelan lan ngawasi
- Programmable 2/3 stage lan kurva pangisian daya liwat SBP-001
- Setelan manual kanggo 2/3 stage lan 4 kurva pangisian daya sing dibangun liwat DIP SW
- Multiple proteksi:
Short circuit / Over voltage / Over temperature/ Battery under voltage/ Battery reverse polarity (No damage) - Pangisi daya OK lan Baterei sinyal Full
- Fungsi kompensasi suhu kanggo ndawakake umur baterei (mung timbal-asam)
- -30°C~+70°C wide operating temperature
- Penggemar DC sing dikontrol termal kanggo nyuda gangguan
- Remote ON / OFF kontrol
- Smart programmer available (Order NO.: SBP-001, sold separately)
- Aksesori gagang gawan kasedhiya (No. Pesenan: DS-Pegangan nggawa, didol kanthi kapisah)
- Selaras karo 62368-1 + 60335-1/-2-29 dual sertifikasi
- Cocog kanggo baterei timbal-asam (Pb) lan li-ion
- 3 years warranty
aplikasi
- AGV
- E-Sepeda, E-Skuter, Camping mobil, Bus, Kendaraan khusus
- Mesin pemotong rumput robotik
- Robot ngumbah
- Kerajinan rekreasi, yacht pribadi utawa workboat
- Sistem pengawasan
- Stasiun pangkalan telekomunikasi
- Solusi serep sistem radio
- Equipments or instruments with backup battery
Description
NPB-450 punika miniaturized, Versatile, lan ultra-sudhut voltage intelligent charger. It utilizes a fully digital control design with patented automatic battery voltagteknologi deteksi e, kanthi limang fitur utama kalebu cerdas, serbaguna, pangguna-loropaken, aman, lan kompak. Seri duwe papat model karo output voltage ranges of 10.5~21V, 21~42V, 42~80V, and 54~100V respectively. The charging voltage sawetara saben model cukup sudhut kanggo nutupi macem-macem vol baterei bedatages lan kimia baterei, lan ana sing dibangun ing vol cerdastagmode pangisian daya deteksi (Elinga mode iki disetel menyang OFF dening standar pabrik lan mung cocok kanggo baterei lithium karo BMS). NPB-450 bisa dipasangake karo programmer MEAN WELL SBP-001 kanggo konfigurasi digital, kayata pilih 2/3 stage ngisi daya, nyetel daya voltage/saiki, lan nyetel wektu siklus pangisian daya kanggo nglindhungi umur baterei. Liwat pangguna-loropaken DIP SW ing panel ngarep, pangguna uga bisa langsung nyetel 2/3 stage ngisi daya, saiki (50~100%), lan pilih antarane 4 jinis kurva pangisian daya prasetel. Kajaba iku, protokol komunikasi CANBus dibangun kanggo ketemu aplikasi profesional, sing ngidini remot kontrol lan ngawasi status pangisi daya. Ing babagan safety, wis deteksi cerdas kanggo vol baterei sing tepattage and connection as well as protection from reverse polarity. It passes ITE IC/EN/UL62368-1 and household appliances EN60335-1/-2-29 dual safety and 3-year warranty to guarantee reliable operation. The NPB-450 is truly an intelligent, safe, and reliable universal charger with outstanding cost performance.
Encoding Model
Keterangan
Diagram Blokir
PFC fosc : 80KHz
PWM fosc : 60KHz
Kurva Derating
Karakteristik Statis
Manual Fungsi
1. Setelan manual
1.1 2 utawa 3-stage bisa dipilih liwat DIP SW ing panel
1.2 Charging curve can be adjustable via DIP S.W on panel
- The default curve is programmable, whereas other pre-defined curves can be activated by the means of the DIP S.W; This series provides 2 or 3 stage charging curve please refer to the table below and the Mechanical Specification.
2. Programmable charging curve
Kurva Pengisian daya bisa disetel liwat SBP-001 nganggo komputer
langkah 1
Konfigurasi hardware
langkah 2
Connect to software for setting
※ Fungsi Keterangan:
SBP-001 is a programmer, particularly for MEAN WELL’s various programmable battery charger models to program the parameters of charging curves, such as the 2 or 3 stage selectable, Constant current (CC), tapper current(TC), Constant voltage (CV), ngambang voltage (FV),Charging time out and so on, to accommodate the diversified battery specification in industry. With the design accounting for simplicity and convenience, users can easily configure MEAN WELL’s programmable battery chargers with SBP-001 programmer and the computer; all of the setups are able to be finished easily by the means of the specific software.
Note:(1) Tapper current(TC) default is 10%, can be fine tuned from 2% to 30% by SBP-001 with computer or CANBus Interface.
(2) Please contact MEAN WELL for more details.
※ Software Interface:
3. Auto Ranging for Charging (Default non-Auto ranging)
※ Function Description:
a. NPB-450 has built-in auto ranging mode.
(Note this mode is set to OFF by factory default and is suitable for lithium batteries with BMS only)
b. When operating in auto ranging mode , NPB-450 will automatically detect the voltage baterei sing disambungake lan nyetel daya voltage miturut. Iku ora bakal miwiti ngisi daya unit cocok vol batereitage dideteksi.
c. While under auto ranging mode, NPB-450’s built-in MCU will adjust charging voltage. Ora ana potentiometer kanggo voltage adjustment on the front panel.
d. While under auto ranging mode, the charging current can be adjusted between 50~100%. (The charging current can not be adjusted via potentiometer while not operating in auto ranging mode)
※ When using the auto ranging charging curve function, please pay attention to the following:
- Default factory setting is OFF via DC output side DIP S.W, Follow steps A1~A6 below to enable the setting.
- Auto ranging function should use together with Lithium batteries and BMS (Battery Management System).
- Do not exceed the output voltage lan kisaran saiki kaya sing kasebut ing spesifikasi NPB-450 (waca kaca 2).
※ Auto Ranging function by DIP S.W Setting
※ Back to non-auto ranging as following:
4. Auto Derating function
※ Covered by over temperature protection, auto de-rating function works under operation either in charging curve (2 or 3 stage) utawa ing kontrol dening protokol komunikasi (CANBus).
T1(Typ.): Maximum ambient temperature of 100% output current.
T2(Typ.): T1+5℃.
5. CANBus communication interface
CANBus 2.0B version, Can control, setting and monitoring that including output charging voltage, output charging current, internal temperature and DC output ON/OFF……and so on, please refer to the manual pangguna kanggo katrangan luwih.
6. Charger OK Signal
Charger OK signal is a TTL level signal.
The maximum sourcing current is 10mA.
7. Battery Full Signal
Battery full signal is a TTL level signal.
The maximum sourcing current is 10mA.
8. Remote ON-OFF Control
The NPB-450 can be turned ON/OFF by using the “Remote Control” function.
※ The charger is shipped, by factory default, with Remote ON-OFF(pin 7) and +12Vaux (pin 8) shorted by connector.
9. Temperature compensation (3 stage mung)
Temperature compensation function to prolong battery life for lead-acid batteries. Temperature compensation range is 0 ~ 40℃.
The battery temperature sensor comes along with the charger can be connected to the unit to allow temperature compensation of the charging voltage.
Yen sensor ora digunakake, pangisi daya bisa normal.
10. Indikator LED Sisi Output DC & Sinyal sing cocog ing Pin Fungsi
Spesifikasi Mesin
※ Intelligent Battery Charger model
※ DIP S.W
※ Control Pin No. Assignment : HRS DF11-14DS or equivalent
※ LED Status Table
※ Connector Pin No. Assignment : HRS DF11-14DS or equivalent
Note1: Non-isolated signal, referenced to [GND(signal)].
Note2: Isolated signal, referenced to GND-AUX
Dhaptar Aksesoris
※ NTC Sensor and Remote Control mating along with NPB-450 (Standard accessory)
※ Carry handle (Optional accessory, battery charger and pull handle should be ordered seperately)
Instalasi Manual
Mangga waca: http://www.meanwell.com/manual.html
Dokumen / Sumber Daya
 |
MEAN WELL NPB-450 Series 450W High Reliable Ultra Wide Output Range Pangisi daya Baterei Cerdas [pdf] Instruksi Manual NPB-450 Series, 450W High Reliable Ultra Wide Range Output Pangisi daya Baterei Cerdas, NPB-450 Series 450W High Reliable Ultra Wide Range Output Pangisi daya Baterei Cerdas |
Produsen Pasokan Listrik MEAN WELL
