Fagerhult Organic Response I/O Box Recessed
SE - 566 80 Habo
Installation Overview
This document provides installation details for the Fagerhult Organic Response I/O Box Recessed.
Recessed Installation
Step 1: Prepare the mounting location. The box can be recessed up to 30mm (max).
Step 2: Secure the box in the prepared recess.
Stand Alone Box Installation
The stand-alone box has the following dimensions:
- Length: 414mm
- Width: 122mm
- Depth: 35mm
A stand-alone box can connect a maximum of 12 DALI load and emergency devices.
Connection Options
The I/O Box is available with different connection types:
- Art.no 86629: Wago In, Wago Out (3-pole)
- Art.no 86630: Wieland In, Wieland Out (5-pole)
- Art.no 86631: Ensto In, Ensto Out
The box includes quick connections for:
- Sensor
- DALI (x2)
- 16A output
Model 86632: Features quick connections for In (L, N), Out (3-pole L', N), Out (5-pole L, N), and 16A Dali connections.
Model 86633: Features quick connections for Sensor, 16A (230 VAC), and DALI connections.
Third Part Connection
The relay is a latching, volt-free contact, high-inrush type, with a contact rating of 16A.
To control loads over mains, use the included short between L and 16A.
Compliance Information
Fagerhult declares that the radio equipment types T0123R comply with Directive 2014/53/EU and UK SI 2017 No. 1206.
The full text of the EU declaration of conformity is available at: www.fagerhult.com/declaration-of-conformity
Basic Insulation: Basic insulation is provided between mains and control wiring.
Operating Frequency and Power:
- Frequency band: 2.4 GHz
- Output power (EIRP): 4dBm max within the operating band
General Information
It is appropriate that this information is passed on to the users of the installation.
For more information, visit: https://www.fagerhult.com/lighting-control/
Downloads - Fagerhult
