User Manual for ROLLINGSQUARE models including: EKIT01 EDGE Full Kit, EKIT01, EDGE Full Kit, Full Kit, Kit
Rolling Square Edge Magnetic Phone Mount for Tablets and Monitors, Basalt Grey : Cell Phones & Accessories
Rolling Square Edge Mount - stojak na telefon komórkowy, uchwyt na telefon komórkowego, stojak na telefon, srebrny : Amazon.pl: Elektronika
User Manual EDGE® Full Kit EDGE Mount EDGE Wireless Charger EDGE Light EDGE® Mount 2 3 4 1 Use the Magnetic Disc Aligner to stick the Magnetic Disc (A) on the back of your phone. Remove the nano suction's protective film. Clean the surface of the device before proceeding. Open the EDGE Mount and snap your phone on it, find the position you prefer on your device and push part B for 10 seconds to fix it in place. To remove the EDGE Mount pry with EDGE Remover on the lower right side. Never pull the EDGE Mount from part C. EDGE® Wireless Charger 1 2 3 Use the Magnetic Disc Aligner to stick the Magnetic Disc (A) on the back of your phone (not needed for iPhone 12 or later). To center it, use the Magnetic Disc Aligner. Snap the EDGE Wireless Charger to the EDGE Mount and plug the USB-C connector in a USB-C power source. Snap your phone to the EDGE Wireless Charger to start charging your phone. EDGE® Light 1 2 BUTTON Snap the EDGE Light to the EDGE Mount and and click the button to light it up. The first three clicks change the light intensity and the fourth turns it off. The EDGE Light works for 55 minutes at medium intensity when fully charged. To recharge the EDGE Light use the USB-C to USB-C cable provided in the pack. You can also keep it plugged in while using it. ROLLING SQUARE ® is a trademarks of Ferraris Group Sagl / Corso San Gottardo 99, Chiasso CH 6830, Switzerland / +41 091 2347763 Warnings and Specifications Warnings KEEP THE DEVICE OUT OF REACH OF CHILDREN. KEEP THE DEVICE AWAY FROM FIRE AND HIGH TEMPERATURE. AVOID DROPPING THE DEVICE. DO NOT SUBMERGE IN WATER OR EXPOSE TO ADVERSE WEATHER CONDITIONS. DO NOT OPEN OR PUNCTURE IT. DO NOT DISPOSE OF LITHIUM POLYMER BATTERY WITH GENERAL WASTE. PLEASE DISPOSE OF IT IN A BATTERY RECYCLING COLLECTION POINT. Specifications EDGE® MOUNT SIZE: MATERIALS: WEIGHT: 115X30X4.5 mm / 4.5X1.1X1.7 in CNC MACHINED ALUMINIUM, WITH N52 MAGNETS AND AN ULTRA GRIPPING LAYER ON THE FRONT SURFACE 34 gr / 1.1 oz Certifications EDGE® UNIVERSAL WIRELESS CHARGER SIZE: Ø56X6 mm / Ø2.2X0.2 in MATERIALS: CNC MACHINED ALUMINIUM, BASALT GREY WITH N52 MAGNETS INPUT: 5V/2A, 9V/2A, 12V/1.5A OUTPUT: 7.5W / 10W / 15W WEIGHT: 38 gr / 1.3 oz EDGE® LIGHT SIZE: Ø56X11 mm / Ø2.2X0.4 in MATERIALS: CNC MACHINED ALUMINIUM, BASALT GREY BRIGHTNESS: 280 LUMENS WITH X3 LEVELS OF CONTROL INPUT: 5V / 1A BATTERY CAPACITY: 140mAh / 0.5Wh WEIGHT: 35gr / 1.2oz ROLLING SQUARE ® is a trademarks of Ferraris Group Sagl / Corso San Gottardo 99, Chiasso CH 6830, Switzerland / +41 091 2347763macOS Version 13.4 (Build 22F66) Quartz PDFContext Adobe Illustrator 26.5 (Windows)