Opticon OPN-3102i Quick Start Guide

Device Overview

The Opticon OPN-3102i is a compact Bluetooth barcode scanner. Key components include:

2D Imager: Scans 1D and 2D barcodes.
Feedback LED: Provides visual feedback on scanning status.
Trigger Key: Initiates scanning.
Feedback Buzzer: Provides audible feedback.
Clear/Function Key: Used for various functions, including pairing and disconnecting.
USB Connector (Data/Charging): For charging and data transfer.

Bluetooth Mode Setup

To connect the OPN-3102i to your host device, follow these steps:

Step 1 - Scan Bluetooth Mode: Scan the appropriate Bluetooth Default barcode for your desired connection method. Recommended modes are HID (Keyboard emulation) or HID for iOS. HID for iOS allows the onscreen keyboard to be toggled with the function key. SPP or SPP for iOS modes require a specific application on the target device.
Step 2 - Initiate Pairing: Hold the function key for 5 seconds until the device beeps and the indicator light flashes blue. The OPN-3102i is now discoverable. This can be cancelled by holding the function key for another 5 seconds.
Step 3 - Perform Bluetooth Search on Host: On your host device (e.g., smartphone, tablet, computer), use the Bluetooth interface to search for and select the OPN-3102i. The scanner will beep to confirm a successful or failed pairing.

For SPP or Apple MFi pairing, launch an appropriate application (like OPNTerm for iDevices) after pairing to establish the serial port connection. If your host device does not support Simple Pairing, you may need to use a PIN code via specific barcodes.

Bluetooth Disconnect / Reconnect

To disconnect an active Bluetooth connection, hold the trigger key for 5 seconds.
To reconnect, hold the trigger key for 5 seconds. Any scanned data will be automatically transmitted once reconnected.

Caution Handling and Warnings

Do not disassemble the device or attempt to change the battery yourself; contact an authorized service center.
Avoid operating the device while walking or driving.
Do not swing the device by its strap.
Do not place heavy items on the device or subject it to shocks.
Store the device in a moderate environment, avoiding extreme cold, heat, dust, or high humidity.
Keep the device away from fire, combustible materials, and liquids.
Do not insert sharp objects into the buzzer hole to maintain waterproof performance.
Avoid static electricity and proximity to radios or TVs.
If condensation forms, allow the device to dry completely before use.
Clean the device with a soft dry cloth or a slightly damp cloth with mild detergent.
Warning: Do not throw the device into a fire, as it may explode or act as an accelerant. Keep out of reach of small children.

Radio Frequency Information

The OPN-3102i operates within the 2402 - 2480 MHz frequency band, with a maximum output power of 4 dBm at 25°C.

Compliance Information

Opticon Sensors Europe B.V. declares that the OPN-3102i radio equipment complies with Directive 2014/53/EU. The full text of the FCC statement and EU Declaration of Conformity is available at: https://opticon.com/product/OPN-3102i.

Further Information

For detailed setup instructions, downloads, and more information, visit:

	Opticon OPN-3102i Bluetooth Quick Start Guide A quick start guide for the Opticon OPN-3102i Bluetooth scanner, covering connection modes (HID, SPP, MFi), feedback options, and NFC pairing for Android devices.
	Opticon OPN-2500 Quick Start Guide Concise guide to setting up and pairing the Opticon OPN-2500 Bluetooth barcode scanner with your host device, including instructions for different connection modes and iOS compatibility.
	Opticon L-22X 2D CMOS Image Scanner: High-Speed Barcode Scanning Discover the Opticon L-22X, a high-performance 2D CMOS image scanner offering fast, reliable barcode reading for various applications. Features ergonomic design, IP42 rating, and USB/RS232 connectivity.
	Opticon L-46X 2D Handy Scanner User's Manual User's manual for the Opticon L-46X 2D Handy Scanner, detailing features, setup, configuration, interface options, code settings, and troubleshooting for efficient barcode data capture.
	Opticon PHL-7100/PHL-7200 Ruggedized Portable Data Terminal User Manual Opticon PHL-7100 and PHL-7200 Ruggedized Portable Data Terminal User Manual. This guide details setup, operation, features, software, and safety for Opticon PDT devices.
	Opticon SE-290 E-paper Display: Product Specifications and Features Detailed information on the Opticon SE-290, a high-resolution, fully graphical e-paper display supporting multiple colors. Features include real-time pricing, low power consumption, and centralized management via Opticon ESL Web Server Software.
	Opticon SE-1160R 11.6-inch E-paper Display - Product Specifications and Features Discover the Opticon SE-1160R, a high-resolution, fully graphical e-paper display with RGB LED illumination. This document details its specifications, features, and benefits for retail environments, including its low power consumption, long battery life, and versatile communication protocols.
	Opticon SE-266R 2.66-inch E-paper Display Product Specifications Detailed specifications for the Opticon SE-266R, a high-resolution, fully graphical e-paper display supporting black, white, and red colors. Features include a high-efficiency RGB LED, bistable display technology, and long battery life.