User Manual for Antari models including: W-508, W-510, W-508 Wireless Fog Machine, Wireless Fog Machine, Fog Machine, Machine
DOWNLOAD - Antari Lighting And Effects
File Info : application/pdf, 20 Pages, 1.61MB
DocumentDocumentW-508 / W-510 Wireless Fog Machine User Manual - English -
© 2023 Antari Lighting and Effects Ltd.
1. Introduction ................................................................................................................................................. 1 2. Safety Information ....................................................................................................................................... 1 3. Package Contents & Inspection ................................................................................................................... 3 4. Machine Details ........................................................................................................................................... 3 5. Technical Label Information........................................................................................................................ 4 6. Fog Fluid...................................................................................................................................................... 4 7. Setting and Manual Operation ..................................................................................................................... 4 8. Control Settings ........................................................................................................................................... 5 9. DMX Function (W-510 Only) ..................................................................................................................... 5 10. WTR-10 Wireless Remote (Standard) ......................................................................................................... 6 11. Service and Maintenance ............................................................................................................................. 7 12. Technical Specifications .............................................................................................................................. 7 13. Warranty Disclaimer .................................................................................................................................... 8 14. Machine Dimension..................................................................................................................................... 8 1. ............................................................................................................................................................. 9 2. ............................................................................................................................................. 9 3. ........................................................................................................................................11 4. ....................................................................................................................................................11 5. ........................................................................................................................................... 12 6. ....................................................................................................................................................... 12 7. ............................................................................................................................... 13 8. ................................................................................................................................................... 13 9. DMX ( W-510) .......................................................................................................................... 13 10. WTR-10 () ..................................................................................................................... 14 11. ............................................................................................................................................... 15 12. ................................................................................................................................................... 15 13. ................................................................................................................................................... 16 14. ............................................................................................................................................... 16 Appendix I Grounding Instruction.................................................................................................................. 17
User Manual
1. Introduction
Please read all the user manual before operating the machine, and place the manual where the user can refer to it at all time. The manual includes how to install and operate the machine under safe condition and explain all the labels printed on the machine. If you encounter any problem, contact your local Antari dealer for assistant immediately.
2. Safety Information
DANGER If the danger is not avoided, it will cause death or serious injury
WARNING If the warning is not heeded, it can cause death or serious injury.
CAUTION If the precaution is not taken, it may cause minor or moderate injury.
DANGER
Must connect the machine to the correct rated voltage or it might lead to an electrical shock or a burn and may cause serious consequences.
Must connect the machine to a protected circuit and ensure it is properly grounded to avoid the risk of electrocution. For grounding instruction, please refer to Appendix I on page 17.
Do not operate the machine with a bundled power cord, it could lead to a fire hazard. When operating the machine, do not point at people, animals, or fire.
WARNING
Machine's nozzle is extremely hot, please keep at least 50cm distance from the nozzle when the machine is running.
Please operate the machine on a flat, level hard and well ventilated surface area, reserve at least 50cm space around the machine and make sure there is no flammable gas or material nearby.
Do not disassemble, repair or modify the machine, it may cause damages, malfunction, risk of electrical shock or result in fire.
The machine can only be operated by adults or professionals, is not intended for use by person with reduced physical sensory, mental capabilities, or lack of experience and knowledge including children.
Do not leave the machine running unattended, make sure all powers are off when leaving. Children should be supervised to ensure that they do not play with the machine. Do not use the machine upside down or tilt it, it might cause damages or malfunction. Please store the fluid inside in a well ventilated area without direct sunlight and keep out of reach of children.
In case of eye contact or accidentally swallow the fluid, please seek medical attention immediately.
CAUTION
Keep the machine dry at all time. The machine is not waterproof, do not expose the machine to water, rain, or moisture environment.
Please make sure the power outlet is not damaged or loose before plug in the power cord. If the power cord is damaged, it must be replaced by Antari or its local dealers, otherwise the warranty will be
void.
1
Before operating the machine, please sure the fluid is filled in the fluid tank to avoid the pump in idling state which could lead to overeat or malfunction.
Before transporting the machine, please make sure the fluid is drained and tank is empty. (Recommend using original package)
The machine is for indoor use only. Do not operate the machine in any area with unstable voltage. If you experience strange sound or malfunction, turn off the power and unplug the power cord immediately
and contact your local Antari dealer for assistant. Do not contact any moving part. Only use accessories recommended or sold by Antari. Please make sure the power is off when not using the machine and unplug the power cord if not intend to use
for a long period of time. To disconnect, turn all controls to the off position, then remove plug from outlet. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Unplug from outlet before servicing or cleaning. Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or is dropped or
damaged in any manner. Return machine to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment. To ensure the lifespan of the machine, please only use the fluid manufactured by Antari, do not use other fluid or additive, otherwise it may clog the heater and cause malfunction.
Before operating the machine, please read all warning labels on the machine, description as below;
W-508
Top Cover Printing WARNING! HOT NOZZLE! KEEP AT LEAST 50CM DISTANCE
Back Cover Printing ONLY USE DEALER RECOMMENDED FOG FLUID. NEVER ADD FLAMMABLE SUBSTANCES
WARNING! DISCONNECT POWER BEFORE CHANGING FUSE USE ONLY WITH ADULT SUPERVISION DO NOT OPERATE WITHOUT LIQUID FOR INDOOR USE ONLY. KEEP DRY NO USER SERVICEABLE PARTS INSIDE
CAUTION: TO REDUCE THE RISK OF FIRE, REPLACE ONLY WITH SAME SIZE AND TYPE OF FUSE.
W-510
Top Cover Printing USE ANTARI LIQUID ONLY OR ONLY USE DEALER RECOMMENDED FOG FLUID. NEVER ADD FLAMMABLE SUBSTANCES.
WARNING! HOT NOZZLE! KEEP AT LEAST 50CM DISTANCE
Back Cover Printing WARNING! DISCONNECT POWER BEFORE CHANGING FUSE USE ONLY WITH ADULT SUPERVISION
2
DO NOT OPERATE WITHOUT LIQUID FOR INDOOR USE ONLY. KEEP DRY NO USER SERVICEABLE PARTS INSIDE
3. Package Contents & Inspection
3.1 Package Contents
Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure it is the correct model and all parts are included. If any part appears to be damaged or missing during transportation, please contact your local dealer and return in original package for inspection.
W-508 1 x W-508 Wireless Fog Machine 1 x W-1 Wireless Transmitter 1 x User Manual or Scan QR Code on the Machine
W-510 1 x W-510 Wireless Fog Machine 1 x 2.8 Liters Fluid Tank 1 x W-1 Wireless Transmitter 1 x IEC Power Cable 1 x User Manual or Scan QR Code on the Machine
3.2 Optional Accessories (W-510 Only)
Item Code W-510-HB
Hanging Bracket
4. Machine Details
Description
01. Nozzle 02. LED Indicator Light 03. Fluid Level Indicator 04. W-1 Wireless Receiver
05. Wireless Status Indicator Light 06. Power Input 07. Fuse 08. Power Switch
3
01. Nozzle 02. 2.8 Liter Fluid Tank 03. Wireless/DMX Indicator Light 04. XLR 3-Pin Connector (DMX) 05. W-1 Wireless Receiver
06. Safety Ring 07. Dip Switch 08. Power Switch 09. IEC Connector (Power) 10. Machine Status Indicator Light
5. Technical Label Information
Please read the technical label information on the back of the machine before operating it.
1. Model Name 2. Input Voltage 3. Frequency 4. Rated Power
6. Fog Fluid
5. Breaker/Fuse 6. QR CODE for User Manual 7. Serial No.
CAUTION!
Always turn off the power before filling the fluid tank. Do not add flammable liquid to the fluid tank. If fluid gets inside the machine, please contact your local Antari dealer for assistant.
Only the fog fluid manufactured by Antari can be used, do not mix or dilute the fog fluid. Due to improper storage or using other fluid might clog the heater and cause malfunction.
The machine is tested and calibrated with the specific fog fluid to get the best performance. Please empty the fluid in the tank before switching to another fluid to avoid mixing. Only the essence manufactured by Antari can be used, and add according to the ratio recommended by Antari
(Recommended ratio is 1:1000), if using other essence or different ratio might clog the heater and cause malfunction. The warranty on your fog machine will be void if you use fog fluid not manufacture by Antari.
7. Setting and Manual Operation
WARNING
Machine falling off might cause serious injury, please make sure it is secure and firm on the overhead.
4
W-508 Step 1. Place the machine on a flat, level hard and well ventilated surface area and reserve at least 50 cm open
space around the machine, and make sure there is no flammable gas or material nearby; Step 2. Fill the fluid tank with Antari approved fog fluid; Step 3. Plug the machine to the power outlet. Please read the technical label on the back of the machine and make
sure the power outlet has the correct rated voltage for the machine; Step 4. Turn on the power, the machine starts to warm up and the button on the handle will show red blinking
light. The warming process takes approximately 2 minutes. Once the machine has reached its operating temperature, the red blinking light will turn solid. Now the machine is ready for operation; Step 5. To start fogging, please press the button on the handle. To stop fogging, please release the button the handle; Step 6. Or refer to "10. WTR-10 Wireless Remote" for wireless operating instruction; Step 7. To turn off the power, please make sure the machine is not operating. If you will not use the machine a long period of time, please unplug the power cord.
W-510 Step 1. Step 2. Step 3. Step 4.
Step 5. Step 6.
Place the machine on a flat, level hard and well ventilated surface area and reserve at least 50 cm open space around the machine, and make sure there is no flammable gas or material nearby; Fill the fluid tank with Antari approved fog liquid, and make sure the tube is not twisted; Plug the machine to the power outlet. Please read the technical label on the back of the machine and make sure the power outlet has the correct rated voltage for the machine; Turn on the power, the machine starts to warm up and the indicator light on the back of the machine will show red blinking light. The warming process takes approximately 13 minutes. Once the machine has reached its operating temperature, the green indicator light on the back will turn solid. Now the machine is ready for operation; refer to "10. WTR-10 Wireless Remote" for wireless operating instruction; To turn off the power, please make sure the machine is not operating. If you will not use the machine a long period of time, please unplug the power cord.
8. Control Settings
W-508/W-510 Wireless Fog Machine can be operated in the following modes. The machine can only accept 1 type of signal at a time.
W-508 Manual Wireless
W-510 DMX512 Wireless
9. DMX Function (W-510 Only)
9.1 DMX Connector Pin Assignment
This machine has a XLR 5-Pin connector for DMX connection. The diagram below indicates pin assignment information;
5
**There is a protection cap on DMX IN, please remove it with your finger before operation.
Pin
Function
1
Ground
2
Data-
3
Data+
9.2 DMX Channel Function
Channel Mode
Channel 1
Fog
DMX Value Range 0 5
6 255
Function Off
100%
9.3 DMX Addressing
Each device occupies 1 channel. To ensure that the control signals are properly directed to each device, they require addressing. This is to be adjusted for every single device by changing the DIP-switches as set out in the table below. The starting address is defined as the first channel from which the device will respond to the controller. Please make sure that you do not have any overlapping channels in order to control each device correctly and independently from any other fixture on the DMX data link.
Occupation of the DIP-switches:
Setting the DMXStarting Address
DIP-Switch No.
1
2
3
4
5
6
7
8
9
Device Number & Channels
Staring Address
1
2
4
8
16 32 64 128 256
Device 1 Channel 1
On
Off
Device 2 Channel 2
On
Off
Device 3 Channel 3
On
Off
Device 4 Channel 4
On
Off
Device 5 Channel 5
On
Off
10. WTR-10 Wireless Remote (Standard)
WTR-10 Wireless Remote is a standard accessory for W-508/W-510 Wireless Fog Machine, it included a W-1 wireless transmitter and a W-1 wireless receiver (Already on the machine) and it's ready to use. If you encounter any problem, please contact your local Antari dealer for assistant.
6
10.1 W-1 Wireless Transmitter & Receiver
Battery27A 12V Effective RangeThe effective range is approximately 50
meter, depends on actual condition, it may vary. If effective range is significantly shorter, please change battery. W-2 wireless transmitter has 4 buttons, each function as follow:
Button [A] [B]
Function Start Fogging Stop Fogging
W-1 Wireless Transmitter
10.2 Pair
W-1 Wireless Receiver (Already on the Machine)
Each receiver can pair up to 5 transmitters, please follow the steps below to pair;
Step 1. Step 2.
Turn on the machine, W-508 with green indicator light/W-510 with orange indicator light will flash for 15 seconds. Within this time period, press button A on the W-1 transmitter to pair with the machine. When indicator light stop flashing, means it's paired; Please repeat Step 1 to pair multiple transmitters.
*If exceed 15 seconds, turn the power off and on again.
11. Service and Maintenance
DANGER! Disconnect the power cord before starting maintenance operation!
Always keep the machine clean and dry. Can use air compressor, vacuum or a soft brush to remove the dust on the machine. Can use a slightly damp cloth to clean the casing. Before store the machine, please make sure the machine is completely cool down to avoid moisture inside
causing malfunction. It is recommended to run the machine at least once a month in order to maintain the machine's best
performance and output condition. Excessive dust and build up liquid residue will reduce the performance and cause overheat.
12. Technical Specifications
Input Voltage Rated Power Warming-up Time
W-508 US Model: AC 100-120V, 50/60Hz 7.0A EU Model: AC 220-240V, 50/60Hz 3.5A
800W
2 minutes (approx.)
7
W-510 US Model: AC 100-120V, 50/60Hz 8.5A EU Model: AC 220-240V, 50/60Hz 4.5A 120V 1000W 240V 1070W
13 minutes (approx.)
Fluid Consumption Fluid Tank Capacity
Compatible Fluid
Ambient Temp. Range Control Methods
Interface DMX Channels Included Accessories Optional Accessories Dimension Weight
W-508 13 ml/min (100% output)
W-510 90 ml/min (100% output)
0.8 Liters (0.21 Gallon)
2.8 Liters (0.74 Gallon)
Antari FLG Heavy Fog FluidAntari FLR Light Fog FluidAntari FLH Long Hang Time Fog Fluid
0°C 40°C (32°F 104°F)
ManualWireless
N/A N/A WTR-10 Wireless Remote
DMX512Wireless
XLR 3-Pin Connector (DMX)IEC Connector (Power) 1 Channel
N/A
L 315 W 128 H 218 mm (L 12.40 W 5.04 H 8.58 inch)
3.8 kg (8.38 lbs.)
Hanging Bracket
L 490 W 250 H 250 mm (L 19.29 W 9.84 H 9.84 inch)
11.4 kg (25.13 lbs.)
13. Warranty Disclaimer
We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in connection with the use, sale, or repair of any merchandise purchased from us.
14. Machine Dimension
W-508
W-510
8
1.
Antari
2.
17 I
50
50
()
9
()
Antari
Antari Antari
W-508
WARNING! ! HOT NOZZLE! ! KEEP AT LEAST 50CM DISTANCE 50
ONLY USE DEALER RECOMMENDED FOG FLUID. NEVER ADD FLAMMABLE SUBSTANCES
WARNING! ! DISCONNECT POWER BEFORE CHANGING FUSE. USE ONLY WITH ADULT SUPERVISION. DO NOT OPERATE WITHOUT LIQUID. FOR INDOOR USE ONLY. KEEP DRY. NO USER SERVICEABLE PARTS INSIDE.
CAUTION: TO REDUCE THE RISK OF FIRE, REPLACE ONLY WITH SAME SIZE AND TYPE OF FUSE.
,
W-510
USE ANTARI LIQUID ONLY OR ONLY USE DEALER RECOMMENDED FOG FLUID. NEVER ADD FLAMMABLE SUBSTANCES.
HOT NOZZLE! ! KEEP AT LEAST 50CM DISTANCE 50
WARNING! !
10
DISCONNECT POWER BEFORE CHANGING FUSE. USE ONLY WITH ADULT SUPERVISION. DO NOT OPERATE WITHOUT LIQUID. FOR INDOOR USE ONLY. KEEP DRY. NO USER SERVICEABLE PARTS INSIDE.
3.
3.1
W-508 1 x W-508 1 x W-1 1 x QR CODE
W-510 1 x W-510 1 x 2.8 1 x W-1 1 x IEC 1 x QR CODE
3.2 ( W-510)
W-510-BH
4.
01. 02. LED 03. 04. W-1
05. 06. 07. 08.
11
01. 02. 2.8 03. /DMX 04. XLR 3-Pin (DMX) 05. W-1
5.
06. 07. 08. 09. IEC () 10.
1. 2. 3. 4.
6.
5. / 6. QR CODE 7.
Antari
Antari
Antari ( 1:1000)
12
7.
W-508 1.
2. 3.
4.
5. 6. 7.
50 ; ANTARI ;
;
2 ; ; "10. WTR-10 ";
W-510 1.
2. 3. 4.
5. 6.
50 ; ANTARI ; ; 13 ; "10. WTR-10 ";
8.
W-508/W-510
W-508
W-510 DMX512
9. DMX ( W-510)
9.1 DMX
XLR 3-PIN DMX PIN ;
13
**DMX IN
Pin
1
2
-
3
+
9.2 DMX
1
DMX 0 5 6 255
100%
9.3 DMX
DMX
:
Setting the DMXStarting Address
DIP-Switch No.
1
2
3
4
5
6
7
8
9
Device Number & Channels
Staring Address
1
2
4
8
16 32 64 128 256
Device 1 Channel 1 Device 2 Channel 2 Device 3 Channel 3
On
Off
On
Off
On
Off
Device 4 Channel 4
On
Off
Device 5 Channel 5
On
Off
10. WTR-10 ()
WTR-10 W-508/W-510 W-1 W-1 () Antari
10.1 W-1 &
27A 12V 50
14
W-2 2
[A] [B]
W-1
W-1
10.2
1W-508 /W-510 15 A ;
2 1 **
11.
!
12.
DMX 512
W-508
W-510
: AC 100-120V, 50/60Hz 7.0A
: AC 100-120V, 50/60Hz 8.5A
: AC 220-240V, 50/60Hz 3.5A
: AC 220-240V, 50/60Hz 4.5A
800
120V 1000
240V 1070
2
13
13 / (100%)
90 / (100%)
0.8 (0.21 )
2.8 (0.74 )
Antari FLG Antari FLR Antari FLH
0°C 40°C (32°F 104°F)
DMX 512
N/A
1
15
W-508 N/A
WTR-10 N/A 315 128 218 ( 12.40 5.04 8.58 ) 3.8 (8.38 )
W-510 XLR 3-Pin (DMX)IEC ()
490 250 250 ( 19.29 9.84 9.84 ) 11.4 (25.13 )
13.
14.
W-508
W-510
16
Appendix I Grounding Instruction
This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipmentgrounding conductor. If repair or replacement of the cord or plug is necessary, do not connect the equipmentgrounding conductor to a live terminal. Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is for use on a nominal 120V circuit, and has a grounding plug that looks like the plug illustrated in sketch A in Figure. A temporary adaptor, which looks like the adaptor illustrated in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adaptor should be used only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by the metal screw.
17
C08W50106
Microsoft Word 2016 Microsoft Word 2016