User Manual for Sunsky models including: GR03 Bluetooth Receiver, GR03, Bluetooth Receiver, Receiver
Shenzhen Xilong Industrial Co., Ltd RECEIVER Bluetooth Receiver 2BHYM-RECEIVER 2BHYMRECEIVER receiver
GR03
TF
B AB AB
/ /
AUX
Type-C
"GR03"
AB A A
3.5mm
/
TF/
/
5.3 2.4GHz Class2 HFP/HSPIA2DPIAVRCP 10 250mAh 15~30mA 5.0V 140mA
Bluetooth Receiver
Model: GR03
Product Diagram:
Previous Song/VolumeNext Song/Volume+
TF Card Slot Power Button AUX
Connect to two mobile phones
Paired Phone A
Paired Phone B
BT successfully
A
connect
GR03
BT off
BT successfully connect
GR03
Turn off
A B BT ON
Phone A Auto connect
Phone B ON
Play Music
After BT connection, Please insert one end of the audio cable or pin into the audio port of the BT receiver, and connect the other end to the output device to listen to songs or talk with the receiver.
Power on/off
Power on Power off
Type-C Port
Long press Long press
Play/Pause
Short press
Previous song
Short press
Next song
Short press
Volume -
Long press
Volume +
Long press
Click three times to switch to Bluetooth Switch TF card/ BT audio source audio mode, need to short press to play.
Pairing
Power on the device, turn on your mobile phone BT and search for the pairing name "GR03" to paired them. After the connection is successfully, there is a prompt tone, and the atmosphere light keeps on.
Make Phone Call
Answer/Hang up the call Reject phone call
Redial the last phone call no
Click Long press Double click
This device with colorful atmosphere light. There are different lighting effects in different states such as music playing and charging.
The atmosphere light status
Waiting for pairing
Atmosphere light flashes from left to right
Bluetooth connect successfully
Colorful light keeps on
Playing music
Atmosphere light in breathing mode flashes slowly
Pause music
Atmosphere light keeps on
Power off
Atmosphere light flashes then turns off
Power on
Atmosphere light flashes once then flashing from left to right
Specifications:
BT Version: 5.3 Frequency Range: 2.4GHz Output Power Category: Class2 Bluetooth Mode: HFP/HSPIA2DPIAVRCP Bluetooth Range: up to 10m Battery: 250mAh Working Current: 15~30mA Charge Voltage: DC 5.0V Charge Current: 140mA
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without restriction
Adobe PDF library 15.00 Adobe Illustrator(R) 17.0