HAVIT FREEGO1 AIR Wireless Headphones Product Manual

Introduction

Product Overview

This document provides instructions for the HAVIT FREEGO1 AIR wireless headphones.

Packing List

• HAVIT FREEGO1 AIR headphones
• User manual
• Certificate of quality

Production Structure

The headphones feature the following components:

• 1. Multi-function button (MFB)
• 2. Volume -/Next track button
• 3. Volume+/Previous track button
• 4. LED indicator
• 5. Charging port
• 6. Speaker

Getting Started

Power On and Bluetooth Connection

1. Ensure your phone has Bluetooth functionality.
2. To power on, long press the MFB for 3 seconds. The LED indicator will flash blue and red alternately, indicating pairing mode.
3. Activate your phone's Bluetooth and search for "Freego1 Air". Follow your phone's instructions to connect.
4. The headphones will automatically reconnect to the last paired device. If you move out of Bluetooth range, they will attempt to reconnect automatically within 3 minutes of returning to range.

Power Off

Long press the MFB for 5 seconds to turn off the headphones.

Operation

Answering and Managing Calls

• Answer Incoming Call: Press the MFB once. (Note: Some phones may require manual setup to answer calls via headphones.)
• Hang Up Current Call: Press the MFB once.
• Decline Call: Long press the MFB for 2 seconds.

Music Control

• Play/Pause: Press the MFB once.
• Next Track: Long press the Volume - button for 2 seconds.
• Previous Track: Long press the Volume + button for 2 seconds.
• Volume Down: Press the Volume - button once.
• Volume Up: Press the Volume + button once.

Activate Voice Assistant

Triple-click the MFB to activate your phone's voice assistant.

Maintenance and Charging

Restore Factory Settings

If pairing issues occur, restore factory settings: Long press the Volume - and Volume + buttons simultaneously for 4 seconds until the LED indicator flashes blue three times. The headphones will enter pairing mode again. Search for "Freego1 Air" to pair.

Charging

1. Use the provided charging cable to charge the built-in rechargeable battery. The headphones will automatically power off when charging.
2. Fully charge the product before first use. Charging takes approximately 2 hours.
3. The LED indicator shows solid red while charging and solid blue when fully charged.

Notes on Battery

• Use chargers certified by reputable manufacturers.
• Battery performance may decrease over time with repeated charging and use, which is normal for rechargeable batteries.

Specifications

• Battery: 110mAh
• Input Voltage/Current: DC 5V/110mA
• Play Time: 12 hours (at 80% volume)
• Talk Time: 10 hours (at 80% volume)
• Charging Time: Approximately 2 hours
• Speaker Size: 16.2mm

Warnings and Compliance

General Warnings

1. Operate the headphones according to these instructions.
2. Keep the headphones away from heat sources (radiators, stoves, etc.) as they are not high-temperature resistant.
3. Do not block the headphone ports (charging, LED, microphone).
4. To protect hearing and prolong speaker life, avoid using the headphones at maximum volume for extended periods.
5. If the headset is damaged for any reason, contact customer support for assistance rather than attempting self-repair. Unauthorized repairs will void the warranty.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.