Elimko - logo

E-FT-10 PANDUAN PENGGUNA

Unit kontrol piranti E-FT-10 dirancang kanggo pemasangan rel lan kudu digunakake ing lingkungan industri.

  • Paket piranti E-FT-10 ngemot;
    pirantiIkon peringatan
    Manual pangguna
    Sertifikat jaminan
  • Sawise mbukak paket, priksa isi karo dhaptar ing ndhuwur. Yen produk sing dikirim salah jinis, item apa wae sing ilang utawa ana cacat sing katon, hubungi vendor sing sampeyan tuku produk kasebut.
  • Sadurunge nginstal lan ngoperasikake piranti, waca manual pangguna kanthi lengkap.
  • Instalasi lan konfigurasi pengontrol mung kudu ditindakake dening wong sing nduweni kualifikasi ing instrumentasi.
  • Tansah unit kasebut adoh saka gas sing bisa ditindakake, sing bisa nyebabake bledosan.
  • Aja nggunakake alkohol utawa pelarut liyane kanggo ngresiki piranti. Gunakake gombal resik direndhem ing banyu tightly squeezed kanggo alon-alon ngusap lumahing njaba piranti.
  • Umur piranti yaiku 10 taun.
Isine ndhelikake
1 PAMBUKA
2 DIAGRAM KONEKSI
3 PRINSIP KERJA
4 UNIT OUTPUT
5 ALAMAT KOMUNIKASI
6 TABEL
7 Dokumen / Sumber Daya
7.1 Referensi

PAMBUKA

Elimko FT 10 Series Filter Timer -

E-FT-10 minangka timer sing bisa diprogram kanthi unit kontrol tekanan, digunakake ing sistem reresik saringan. Piranti kasebut ngemot unit kontrol lan unit output, sing dikontrol dening unit kontrol. Unit kontrol ngontrol unit output ing saluran komunikasi. Operasi lan selonoid voltagunit output diwenehake saka unit kontrol. Unit kontrol duwe 8 output, saben unit output nganti 16 output. Output bisa ngalih maksimal 250 VAC, 1A. Piranti kasebut nduweni 2 relay weker. Relay iki bisa menehi weker kanggo pangguna, yen ana masalah ing selonoid output. Baris komunikasi RS-485 ing piranti dianggo miturut protokol Modbus. Parameter konfigurasi lan pesen kesalahan uga bisa viewed nggunakake Modbus. Urutan pemindaian output dikonfigurasi kanthi baris comminucation.
Piranti duwe 2 jinis input tekanan sing beda miturut kode jinis piranti, sing diterangake ing
1.1 JENIS KODE
Yen U (TYPE CODING) dipilih minangka "1", input tekanan disambungake ing sambungan cepet, sing dituduhake minangka LO lan HI ing panel ngarep. Ing kasus iki, tekanan diferensial diukur kanthi sensor tekanan internal. Yen U (TYPE CODING) dipilih minangka "2", sinyal analog (saiki utawa voltage) disambungake menyang input analog piranti. Ing rong kahanan sing beda iki, nilai tekanan ditampilake ing tampilan, dikirim maneh ing output analog. Piranti bisa nindakake ON / OFF utawa kontrol proporsional miturut nilai tekanan. Kontrol iki
cara diterangake ing 4.1 JENIS KONTROL.
1.1. KODE TIPE

Elimko FT 10 Series Filter Timer - TYPE KODE

(1) Sensor tekanan piranti dianggo ing kisaran 7kPa. Yen kontrol tekanan dipilih minangka input analog, jinis input lan sawetara input kudu ditetepake miturut urutan.
(2) Nalika X dipilih minangka "1" (Solenoid Voltage Ya) tinimbang Y kudu dipilih minangka "1". Nalika X dipilih minangka "1" standar pabrik punika 24 VDC.
1.2. SPESIFIKASI TEKNIK

Operasional Voltage 85-265 V AC / 85-375 V DC 20-60 V AC / 20-85 V DC
Tipe Tampilan 2×4 digit tampilan 10 mm 7 bagean
Output weker Relay: SPST-NO 250 V AC, 3 A
Retransmisi Output Saiki: 0-20 mA, 4-20 mA (terisolasi)
Output Relay Minimal 8 Relay, maksimal 128 Relay SPST-NO 250 V AC, 1 A
Urip Mekanik Relay 10 000 000 operasi
Urip Listrik Relay Meh padha karo urip mekanik, amarga switching digawe karo semikonduktor.
Tipe Kontrol On/Off, Proporsional (P)
Konsumsi Daya 7W (10 VA)
Suhu operasi 0 °C, +55 tC (Tanpa kondensasi utawa icing)
Suhu panyimpenan -25 °C, +55 °C (Tanpa kondensasi utawa icing)
Memori EEPROM maks. 10000 nulis
Bobot 400 g

1.3. DIMENSI

Elimko FT 10 Series Filter Timer - DIMENSI

DIAGRAM KONEKSI

2.1. DIAGRAM SAMBUNGAN UNIT KONTROL

Elimko FT 10 Series Filter Timer - DIAGRAMS CONNECTION

 

  • Terminal A21 lan A22 (+VSUP-) minangka sumber daya unit output lan disambungake menyang terminal A2 lan A3 saka unit output. Terminal A23 (DATA) yaiku garis data unit output, lan disambungake menyang terminal unit output A1. Terminal kasebut kudu disambungake supaya unit output daya.
  • Selonoid pasokan voltage kudu disambungake B9 lan B10 (+ VSIN-) terminal.
  • Terminal B11 lan B12 (-VOUT+) kudu disambungake menyang terminal B5 lan B6 (+VIN-) saka unit output kanggo pasokan selonoid voltage ing unit output. Yen terminal iki ora disambungake, kabeh selonoid ing unit output mbukak sirkuit, supaya piranti menehi weker lan selonoids ora powered.
  • Alarm1 lan Alarm2 menehi weker miturut sumber weker sing beda-beda, sing diterangake 4.2 ALARM RELAYS.

2.2. DIAGRAM SAMBUNGAN UNIT OUTPUT

Elimko FT 10 Series Filter Timer - OUTPUT UNIT CONNECTION DIAGRAM

  • Unit Kontrol A1-A3, B9-B28, unit output A7-A18, terminal B5-B18 duwe vol berbahayatage. Nalika piranti dikuwasani, aja ndemek terminal kasebutIkon peringatan .
  • Sadurunge ngoperasikake piranti, priksa manawa piranti wis dikonfigurasi kanthi bener. Konfigurasi sing salah bisa nyebabake malfungsi.

3. PENGGUNAAN
Gambar panel ngarep E-FT-10 ditampilake ing bagean 1.PABUKA. RL1 mimpin lampu nalika Relay1 (RL1) powered, mimpin lampu nalika Relay2 RL2 (RL2) powered, mimpin lampu nalika sembarang output selonoid powered, OUT lan mimpin lampu sak mode konfigurasi. Sajrone kaca operasi normal, nomer grup aktif (XX) ditampilake ing tampilan ndhuwur kaya (XX), lan nomer output aktif (YYY) ditampilake ing tampilan ngisor kaya (YYY). Sajrone kaca operasi normal, tombol digunakake kanggo nampilake tekanan diferensial PR Gr O ENTER SETL lan nyetel nilai lan ngganti nilai sing disetel. Nalika lan paramèter ditampilake,Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2tombol ngganti SETH PRG nilai set Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2 tombol bali menyang kaca operasi normal. Sajrone kaca operasi normal, yen lan tombol dipencet bebarengan, tampilan pesen kesalahan dibukak. Sajrone tampilan pesen kesalahan, tombol digunakake kanggo mindhai output sing ana kesalahan, tombol bali menyang kaca operasi normal. Kajaba kaca operasi normal, yen ana tombol sing ora ditekan luwih saka 25 detik, piranti bakal bali menyang kaca operasi normal kanthi otomatis. Kaca konfigurasi dibukak kanggo ngatur paramèter piranti liyane. ENTER PRG

  • Pencet tombol PRG luwih saka 2 detik mlebu ing kaca konfigurasi.
  • Nalika kaca konfigurasi wis mlebu, pesen COD ditampilake ing tampilan ndhuwur lan ditampilake ing tampilan ngisor. Kode keamanan kudu diketik kanthi bener kanggo ngatur paramèter. Yen kode keamanan salah ngetik, paramèter ditampilake, nanging paramèter ora bisa diganti.
  • Setelan pabrik kode keamanan Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2. Kode keamanan bisa diganti nganggo parameter SCOD. Yen kode keamanan dilalekake, daya maneh piranti banjur pencet , lan tombol bebarengan ENTER ing 1 menit sawise miwiti. Sawise kontrol kode keamanan ora digawe siji wektu kanggo ngetik kaca konfigurasi, supaya kode keamanan bisa diganti nganggo parameter SCOD.
  • Nalika kode keamanan diketik kanthi bener, mencet tombol ENTER mlebu ing kaca konfigurasi.
  • Sajrone kaca konfigurasi, Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2 tombol pilih kaca, tombol mlebu menyang kaca sing dipilih, tombol NTER bali menyang kaca operasi PRG normal.
  • Nalika ing kaca konfigurasi, tombol ENTER milih paramèter Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2 tombol ngganti Nilai saka paramèter, tombol dipencet kanggo luwih saka 1 detik kanggo bali menyang tampilan kaca konfigurasi, tombol PRG bali menyang kaca operasi normal.

CATETAN : Tampilan Pesen Kesalahan (pirsani 3.2 GAMBAR TAMPILAN )

Elimko FT 10 Series Filter Timer - Sajrone Weker

3.1. PARAMETER KATEGORI

Elimko FT 10 Series Filter Timer - PARAMETER

Elimko FT 10 Series Filter Timer - icon3 : Nilai tekanan diferensial.
Elimko FT 10 Series Filter Timer - icon4 : Nilai tekanan diferensial nilai set kurang. Parameter bisa disetel antarane -1999 lan SETH.
Elimko FT 10 Series Filter Timer - icon5 : Nilai tekanan diferensial nilai set dhuwur. Parameter bisa disetel antarane Elimko FT 10 Series Filter Timer - icon4lan 9999.
Elimko FT 10 Series Filter Timer - icon6 : Nilai tekanan diferensial set weker. Parameter bisa disetel antarane -1999 lan 9999.
Elimko FT 10 Series Filter Timer - icon7 : Nilai kode keamanan kanggo setelan paramèter. Kode keamanan mlebu antarane 0 lan 9999.
Parameter saka Elimko FT 10 Series Filter Timer - icon8kaca
Elimko FT 10 Series Filter Timer - icon10 Tipe Kontrol. Parameter bisa disetel Elimko FT 10 Series Filter Timer - icon9 (Waca 4.1. JENIS KONTROL )
Elimko FT 10 Series Filter Timer - icon11 : Titik desimal tekanan diferensial. Parameter bisa disetel antarane 0 lan 3.
Elimko FT 10 Series Filter Timer - icon12 : Output analog retransmisi tingkat kurang. Parameter bisa disetel antarane -1999 lan 9999.
Elimko FT 10 Series Filter Timer - icon13 : Output analog retransmisi tingkat dhuwur. Parameter bisa disetel antarane -1999 lan 9999.
Elimko FT 10 Series Filter Timer - icon16 : Output analog retransmisi kisaran saiki. Parameter bisa disetel Elimko FT 10 Series Filter Timer - icon15
Elimko FT 10 Series Filter Timer - icon16: Nilai offset tekanan diferensial. Miturut paramater kasebut, nilai tekanan diferensial nduweni offset positif utawa negatif. Parameter bisa disetel antarane -1999 lan 9999.
Elimko FT 10 Series Filter Timer - icon17 : Nilai histerisis nilai set alarm tekanan diferensial (Elimko FT 10 Series Filter Timer - icon6 ). Parameter bisa disetel antarane 0 lan 9999.
Elimko FT 10 Series Filter Timer - icon19 : Jenis weker relay weker RL1. Parameter bisa disetel Elimko FT 10 Series Filter Timer - icon20 .(pirsani Tabel 4)
Elimko FT 10 Series Filter Timer - icon21 : Fungsi weker saka relay weker RL1. Parameter bisa disetel antarane 0 lan 15. (pirsani 4.2 ALARM RELAY)
Elimko FT 10 Series Filter Timer - icon22 : Kapan Elimko FT 10 Series Filter Timer - icon22 dipilih , yen ana weker, pangguna kudu ngakoni weker kanthi mencet Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2 tombol kanggo mateni output weker. Parameter bisa disetel Elimko FT 10 Series Filter Timer - icon36 or Elimko FT 10 Series Filter Timer - icon23.
Elimko FT 10 Series Filter Timer - icon156: Jenis weker relay weker RL2. Parameter bisa disetel utawa Elimko FT 10 Series Filter Timer - icon111 .(pirsani Tabel 4)
Elimko FT 10 Series Filter Timer - icon110 : Fungsi weker saka relay weker RL2. Parameter bisa disetel antarane 0 lan 15. (pirsani 4.2 ALARM RELAY)
Elimko FT 10 Series Filter Timer - icon159: Kapan Elimko FT 10 Series Filter Timer - icon159 dipilih, yen ana weker, pangguna kudu ngakoni weker kanthi mencet ON Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2 tombol kanggo mateni output weker.Parameter bisa disetel Elimko FT 10 Series Filter Timer - icon36 or Elimko FT 10 Series Filter Timer - icon23.
Elimko FT 10 Series Filter Timer - icon24 : Output selonoid break wektu. Parameter iki nemtokake wektu istirahat antarane rong output. Parameter bisa disetel antarane 0.1 lan 999.9 ing detik.
Elimko FT 10 Series Filter Timer - icon25 : Selonoid output wektu pulsa. Parameter iki nemtokake wektu pulsa saben output. Parameter bisa disetel antarane 0.1 lan 100.0 ing detik.
Elimko FT 10 Series Filter Timer - icon26  : Selonoid output grup wektu break. Nalika Elimko FT 10 Series Filter Timer - icon27parameter luwih saka "1", parameter iki nemtokake wektu break antarane saben klompok. Parameter bisa disetel antarane 0.1 lan 999.9 ing detik.
Elimko FT 10 Series Filter Timer - icon77 : Selonoid output wektu nunggu. Parameter iki nemtokake wektu nunggu, sawise kabeh output powered. Parameter bisa disetel antarane 0.1 lan 999.9 ing detik.
Elimko FT 10 Series Filter Timer - icon28 : Jumlah output. Parameter iki nemtokake jumlah output. Parameter bisa disetel antarane 1 lan 128.
Elimko FT 10 Series Filter Timer - icon27 : Jumlah klompok. Parameter iki nemtokake jumlah klompok nalika nyaring ditindakake karo macem-macem klompok. Parameter bisa disetel antarane 1 lan 16. Yen parameter iki disetel "1", nyaring rampung mung siji klompok.
Elimko FT 10 Series Filter Timer - icon29 : Jinis operasi klompok. Parameter bisa dipilih Elimko FT 10 Series Filter Timer - icon30lan Elimko FT 10 Series Filter Timer - icon31
Elimko FT 10 Series Filter Timer - icon32 : Jumlah pemindaian selonoid sawise mateni input wiwitan. Parameter bisa disetel antarane 0 lan 50.
Elimko FT 10 Series Filter Timer - icon33 : Watesan kurang saka impedansi internal selonoid. Yen pangukuran impedansi selonoid luwih murah tinimbang nilai kasebut, piranti menehi weker sirkuit cendhak. Parameter bisa disetel antarane 0.00 k Ω lan Elimko FT 10 Series Filter Timer - icon34. Yen parameter iki disetel menyang "0", piranti ora bisa ngontrol sirkuit cendhak.
Elimko FT 10 Series Filter Timer - icon34 : Watesan dhuwur saka impedansi internal selonoid. Yen pangukuran impedansi selonoid luwih dhuwur tinimbang nilai kasebut, piranti menehi weker sirkuit mbukak. Parameter bisa disetel antarane Elimko FT 10 Series Filter Timer - icon33lan 30.00 kΩ
Elimko FT 10 Series Filter Timer - icon35: Kapan Elimko FT 10 Series Filter Timer - icon35dipilih minangka Off, selonoids risak langsung dilewati, lan nalika Elimko FT 10 Series Filter Timer - icon35dipilih minangka , kabeh timing bisa digunakake minangka biasanipun. Parameter bisa disetel utawa Elimko FT 10 Series Filter Timer - icon36 ON Elimko FT 10 Series Filter Timer - icon23
Elimko FT 10 Series Filter Timer - icon37 : Komunikasi baud rate. Parameter bisa disetel Elimko FT 10 Series Filter Timer - icon38 k Baud. Tingkat baud kabeh piranti ing jalur komunikasi sing padha kudu padha karo tingkat baud piranti master.
Elimko FT 10 Series Filter Timer - icon39 : Kesetaraan komunikasi. Parameter bisa disetel Elimko FT 10 Series Filter Timer - icon41  . Paritas kabeh piranti ing jalur komunikasi sing padha kudu padha karo paritas piranti master.
Elimko FT 10 Series Filter Timer - icon40 : Alamat komunikasi. Parameter bisa disetel antarane 1 lan 127. Kabeh piranti ing baris komunikasi padha kudu alamat unik.
Parameter saka Elimko FT 10 Series Filter Timer - icon42kaca
Elimko FT 10 Series Filter Timer - icon43 : Nilai Filter saka nilai tekanan diferensial. Parameter iki nemtokake jumlah samprata-rata kanggo pitungan nilai tekanan diferensial. Parameter bisa disetel antarane 1 lan 16.
Elimko FT 10 Series Filter Timer - icon44 : 0 Ohm Nilai kalibrasi saka selenoid resistance measurument. Parameter iki ora dianjurake kanggo ngganti. Sumber selonoid voltage sing disambungake menyang terminal B9 lan B10 rusak. Terminal B11 lan B12 rampung short-circuit Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2 tombol pencet bebarengan kanggo nyimpen nilai.
Elimko FT 10 Series Filter Timer - icon45 : 1000 Ohm Nilai kalibrasi saka selonoid resistance measurument. Parameter iki ora dianjurake kanggo ngganti. Sumber selonoid voltage sing disambungake menyang terminal B9 lan B10 rusak. Resistance 1000 ohm disambungake menyang terminal B11 lan B12. Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2 tombol pencet bebarengan kanggo nyimpen nilai.
Elimko FT 10 Series Filter Timer - icon46 : Parameter iki nemtokake nilai tekanan saka kalibrasi rendah input tekanan. Parameter bisa disetel antarane -1999 lan 9999.
Elimko FT 10 Series Filter Timer - icon47 : Nilai kalibrasi nol tekanan diferensial. Parameter iki ora dianjurake kanggo ngganti. Tekanan diferensial nilai ZERO ditrapake kanggo input tekanan diferensial piranti Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2 tombol pencet bebarengan, supaya ngirit nilai.
Parameter saka Elimko FT 10 Series Filter Timer - icon49 Page (lanjutan)
Elimko FT 10 Series Filter Timer - icon50 : Parameter iki nemtokake nilai tekanan saka kalibrasi dhuwur saka input tekanan. Parameter bisa disetel antarane -1999 lan 9999.
Elimko FT 10 Series Filter Timer - icon51 : Nilai kalibrasi span tekanan diferensial. Parameter iki ora dianjurake kanggo ngganti. Tekanan diferensial nilai SPAN ditrapake kanggo input tekanan diferensial piranti  Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2 tombol pencet bebarengan, supaya ngirit nilai.
Elimko FT 10 Series Filter Timer - icon53 : Output analog 4 nilai kalibrasi mA. Parameter iki ora dianjurake kanggo ngganti. Nyambung an ampterminal ermeter A27(-) lan A28(+). Nalika parameter dipilih, nyetel parameter karo Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2 Nilai tombol nganti maca meter padha karo 4 mA.
Elimko FT 10 Series Filter Timer - icon54 : Output analog 20 nilai kalibrasi mA. Parameter iki ora dianjurake kanggo ngganti. Nyambung an ampterminal ermeter A27(-) lan A28(+). Nalika parameter dipilih, nyetel parameter karo Elimko FT 10 Series Filter Timer - icon1 lan Elimko FT 10 Series Filter Timer - icon2  Nilai tombol nganti maca meter padha karo 20 mA.
Elimko FT 10 Series Filter Timer - icon55: Kode keamanan.
Parameter saka Elimko FT 10 Series Filter Timer - icon56 kaca
Parameter antarane Elimko FT 10 Series Filter Timer - icon57 lan Elimko FT 10 Series Filter Timer - icon58 digunakake kanggo nemtokake jumlah output ing kertu output sing disambungake. Kertu output diprodhuksi 8 utawa 16 output ing periode manufaktur. Paramèter iki digunakake kanggo netepake count output kanggo piranti.Parameter iki disetel kanggo utawa Elimko FT 10 Series Filter Timer - icon59 or Elimko FT 10 Series Filter Timer - icon60.
3.2. TAMPILAN GAMBAR

Tampilan Operasi Normal Tampilan Pesen Kesalahan
Elimko FT 10 Series Filter Timer - icon61 1. Kelompok 15. Output Elimko FT 10 Series Filter Timer - icon66 Ora Selonoid Voltage
Elimko FT 10 Series Filter Timer - icon62 3. Kelompok 8. Output Elimko FT 10 Series Filter Timer - icon67 Selonoid ing Output 2
Short Circuit
Elimko FT 10 Series Filter Timer - icon63 3. Wektu Istirahat Kelompok Elimko FT 10 Series Filter Timer - icon68 Selonoid ing Output 13
Sirkuit Terbuka
Elimko FT 10 Series Filter Timer - icon64 Wektu Nunggu Elimko FT 10 Series Filter Timer - icon69 Alarm Tekanan Tinggi
Elimko FT 10 Series Filter Timer - icon65 Enteni Mulai Input Elimko FT 10 Series Filter Timer - icon70 Ora Weker

PRINSIP KERJA

kapan Elimko FT 10 Series Filter Timer - icon71 parameter padha karo "1", Miwiti mindhai selonoids, piranti ngenteni Elimko FT 10 Series Filter Timer - icon72 wektu istirahat, sawise output O1 diaktifake. Output iki aktif kanggo Elimko FT 10 Series Filter Timer - icon73 wektu pulsa, sawise output O1 dipateni. Piranti ngenteni Elimko FT 10 Series Filter Timer - icon74 wektu break lan proses padha mbaleni karo selonoid sabanjuré. Proses iki terus nganti jumlah output tekan Elimko FT 10 Series Filter Timer - icon75paramèter. Nalika output pungkasan dipateni ing mburi Elimko FT 10 Series Filter Timer - icon73 wektu pulsa, piranti wiwit ngenteni wektu. Sawise ngenteni wektu iku, Elimko FT 10 Series Filter Timer - icon78 wektu break diwiwiti lan output O1 diaktifake ing mburi Elimko FT 10 Series Filter Timer - icon78 wektu istirahat lan mbaleni proses sing padha.
Yen input wiwitan piranti aktif, proses iki terus. Sawise mateni input wiwitan, piranti mbaleni proses iki kanggo Elimko FT 10 Series Filter Timer - icon80 kaping lan mungkasi proses.
Pisanan saka 8 output digunakake ing unit kontrol. Unit output kudu digunakake kanggo luwih saka 8 output.

Elimko FT 10 Series Filter Timer - Diagram kerja

Ing kasus piranti Elimko FT 10 Series Filter Timer - icon98 parameter luwih saka 1, 2 jinis operasi beda kasedhiya. Jinis operasi iki ditemtokake dening Elimko FT 10 Series Filter Timer - icon83 paramèter. Ing aplikasi ngendi nomer klompok luwih saka 1, klompok 1 kertu output digunakake minangka kertu pilihan.
Nalika ing Elimko FT 10 Series Filter Timer - icon83 parameter disetel menyang Elimko FT 10 Series Filter Timer - icon30, piranti bisa digunakake minangka ditampilake ing.
Gambar 4.2 Nalika mindhai diwiwiti, output O1 saka kertu grup diuripake lan Grup 1 dipilih. Elimko FT 10 Series Filter Timer - icon73 wektu istirahat diwiwiti. Output O1 piranti diuripake ing pungkasan wektu istirahat lan Elimko FT 10 Series Filter Timer - icon76 wektu pulsa diwiwiti. Ing pungkasan periode wektu pulsa, O1 de-energized lan Elimko FT 10 Series Filter Timer - icon79 wektu istirahat diwiwiti maneh lan operasi sing padha diulang nganti jumlah output tekan nilai parameter. Nalika output pungkasan de-energized, output O1 saka kertu grup de-energized bebarengan. wektu tunggu grup diwiwiti. Ing pungkasan wektu tunggu klompok, output O2 saka Elimko FT 10 Series Filter Timer - icon96 kertu grup energized lan 2. Group dipilih. Operasi ing grup 1 diulang persis. operasi grup iki bola nganti nomer grup tekan Nilai saka Elimko FT 10 Series Filter Timer - icon81 paramèter. Ing pungkasan operasi klompok pungkasan, Elimko FT 10 Series Filter Timer - icon90 wektu nunggu diwiwiti. Sawise wektu nunggu, grup 1 dipilih maneh lan operasi sing padha diulang.

Elimko FT 10 Series Filter Timer - Diagram kerja1

Nalika ing Elimko FT 10 Series Filter Timer - icon82parameter disetel menyang Elimko FT 10 Series Filter Timer - icon30, piranti bisa digunakake kaya sing dituduhake ing
Gambar 4.3. Nalika mindhai diwiwiti, output O1 saka kertu grup diuripake lan grup 1 dipilih. Elimko FT 10 Series Filter Timer - icon24 wektu istirahat diwiwiti. Output O1 piranti diuripake ing pungkasan Elimko FT 10 Series Filter Timer - icon72 wektu istirahat lan wektu pulsa diwiwiti. Ing pungkasan saka Elimko FT 10 Series Filter Timer - icon76 periode wektu pulsa, O1 wis de-energized lan break wektu diwiwiti maneh lan operasi padha bola nganti nomer output tekan Nilai saka parameter. Nalika output pungkasan de-energized, output O1 saka kertu grup de-energized bebarengan. wektu tunggu grup diwiwiti. Ing pungkasan saka Elimko FT 10 Series Filter Timer - icon26 wektu nunggu klompok, output O2 kertu grup energized lan klompok 2 dipilih. Output saka grup 2 diwiwiti saka ngendi output pungkasan saka grup 1, lan operasi mindhai diulang nganti jumlah output tekan nilai Elimko FT 10 Series Filter Timer - icon27 paramèter. Kaya sing katon ing mantanampLe, output pungkasan saka grup 1st punika energized O3 output, lan output pisanan saka grup 2nd energized O4 output. Operasi klompok iki diulang nganti jumlah klompok tekan nilai parameter. Ing pungkasan operasi klompok pungkasan, Elimko FT 10 Series Filter Timer - icon77 wektu nunggu diwiwiti. Sawise wektu nunggu, grup 1 dipilih maneh lan operasi sing padha diulang.

Elimko FT 10 Series Filter Timer - Diagram kerja2

Yen input wiwitan piranti aktif, proses iki terus. Sawise mateni input wiwitan, piranti mbaleni proses iki kanggo Elimko FT 10 Series Filter Timer - icon100kaping lan mungkasi proses.
Pisanan saka 8 output digunakake ing unit kontrol. Unit output kudu digunakake kanggo luwih saka 8 output. Siji unit output digunakake kanggo grup pilihan unit. Pasokan selonoid saka unit pilihan klompok (+VIN-) disambungake menyang terminal unit kontrol (+VSIN-).
4.1. JENIS KONTROL
Elimko FT 10 Series Filter Timer - icon101  parameter nemtokake jinis kontrol piranti, dipilih minangka Elimko FT 10 Series Filter Timer - icon9
If Elimko FT 10 Series Filter Timer - icon101 parameter dipilih minangka Elimko FT 10 Series Filter Timer - icon179 , piranti ora nindakake kontrol sembarang sak Elimko FT 10 Series Filter Timer - icon99 kaping nunggu. Kabeh saka Elimko FT 10 Series Filter Timer - icon99 wektu nunggu wis ngenteni.
If Elimko FT 10 Series Filter Timer - icon101parameter dipilih minangka Elimko FT 10 Series Filter Timer - icon180 , yen nilai tekanan diferensial luwih dhuwur tinimbang Elimko FT 10 Series Filter Timer - icon106 parameter, wektu nunggu dilewati sak Elimko FT 10 Series Filter Timer - icon107  proses. Yen nilai meksa diferensial luwih murah tinimbang parameter, Kabeh saka Elimko FT 10 Series Filter Timer - icon99 wektu nunggu wis ngenteni sak proses. Yen nilai tekanan diferensial antarane Elimko FT 10 Series Filter Timer - icon107 lan Elimko FT 10 Series Filter Timer - icon106Paramèter, piranti ora padha karo scan sadurungé.

Elimko FT 10 Series Filter Timer - Diagram kerja3

If Elimko FT 10 Series Filter Timer - icon103 parameter dipilih minangka Elimko FT 10 Series Filter Timer - icon108 , yen nilai tekanan diferensial luwih dhuwur tinimbang Elimko FT 10 Series Filter Timer - icon106 parameter, Elimko FT 10 Series Filter Timer - icon99 wektu nunggu dilewati  Elimko FT 10 Series Filter Timer - icon107  sajrone proses. Yen nilai meksa diferensial luwih murah tinimbang parameter, Kabeh saka Elimko FT 10 Series Filter Timer - icon99 wektu nunggu wis ngenteni sak rocess. Yen nilai tekanan diferensial antarane Elimko FT 10 Series Filter Timer - icon107 lan Elimko FT 10 Series Filter Timer - icon106 parameter, Elimko FT 10 Series Filter Timer - icon99 wektu nunggu disetel antarane 0 lan Elimko FT 10 Series Filter Timer - icon99 kanthi proporsional.

Elimko FT 10 Series Filter Timer - Diagram kerja4

4.2. weker weker

Rl1 lan RL2 minangka relay weker, sing menehi weker miturut siji utawa luwih saka siji sumber weker. Jinis weker saka relay iki diatur kaya biasane mbukak utawa biasane ditutup.
Piranti menehi weker ing cilik saka break pasokan selonoid, selonoid mbukak utawa cendhak lan nilai tekanan diferensial dhuwur. sumber weker iki diatur kanggo loro relay karo Elimko FT 10 Series Filter Timer - icon109lan Elimko FT 10 Series Filter Timer - icon110 paramèter, kaya Tabel 4.2. Jenis weker relay, yaiku Elimko FT 10 Series Filter Timer - icon36 biasane mbukak lan Elimko FT 10 Series Filter Timer - icon111 biasane ditutup diatur kanggo loro relay karo Elimko FT 10 Series Filter Timer - icon112 lan Elimko FT 10 Series Filter Timer - icon156 paramèter, kaya Tabel 4.1
Nalika relay weker powered, pangguna bisa ngakoni weker lan mateni relay weker miturut Elimko FT 10 Series Filter Timer - icon154lan Elimko FT 10 Series Filter Timer - icon159 paramèter. Yen paramèter kasebut dipilih, pangguna mbukak kaca pesen kesalahan lan mateni relay, nanging relay sing dipimpin terus murup. Ing kahanan iki, pesen kesalahan weker ditampilake ing kaca pesen kesalahan. Led relay fades sawise negara weker. Yen paramèter kasebut dipilih Elimko FT 10 Series Filter Timer - icon23 , relay lan dipimpin mateni sawise negara weker rampung.
Elimko FT 10 Series Filter Timer - Jinis Weker

Elimko FT 10 Series Filter Timer - icon116 Panjelasan
(SC: Sirkuit Pendek,
OC: Sirkuit Terbuka,
HP: Tekanan Tinggi,
NSS: No Selonoid Supply, SA: Scan Active)		 Elimko FT 10 Series Filter Timer - icon116 Panjelasan
(SC: Sirkuit Pendek,
OC: Sirkuit Terbuka,
HP: Tekanan Tinggi,
NSS: No Selonoid Supply SA: Scan Active)
0 Ora Weker 16 SA
1 SC 17 SA/SC
2 OC 18 SA/OC
3 SC/OC 19 SA/OC/SC
4 HP 20 SA/HP
5 HP/SC 21 SA/HP/SC
6 HP/OC 22 SA/HP/OC
7 HP/OC/SC 23 SA/HP/OC/SC
8 NSS 24 SA/NSS
9 NSS/SC 25 SA/NSS/SC
10 NSS/OC 26 SA/NSS/OC
11 NSS/OC/SC 27 SA/NSS/OC/SC
12 NSS/HP 28 SA/NSS/HP
13 NSS/ HP/SC 29 SA/NSS/HP/SC
14 NSS/HP/OC 30 SA/NSS/HP/OC
15 NSS / HP / OC / SC 31 SA/NSS/HP/OC/SC

Tabel 4.2. Sumber Weker
4.2.1. OPEN / SHORT CIRCUIT ALARM

Piranti bisa menehi weker, nalika sirkuit cendhak utawa mbukak kedadeyan ing selonid. Piranti ngukur garis selonoid lan ngontrol kesalahan ing garis selonoid, sadurunge piranti nguwasani selonoid. Yen ana kesalahan ing selonoid, piranti ora bisa nguripake selonoid lan menehi weker, supaya output piranti ora mbutuhake sekring. Ing mindhai selonoid, nalika selonoid duwe masalah, piranti bisa digunakake kanthi beda miturut Elimko FT 10 Series Filter Timer - icon170 paramèter.
Yen parameter dipilih Elimko FT 10 Series Filter Timer - icon36 , piranti ngenteni Elimko FT 10 Series Filter Timer - icon72 lan Elimko FT 10 Series Filter Timer - icon73 wektu kanggo selonoid sing, nanging output ora powered. Yen parameter dipilih Elimko FT 10 Series Filter Timer - icon23 , piranti ora ngenteni Elimko FT 10 Series Filter Timer - icon74 lan Elimko FT 10 Series Filter Timer - icon73 wektu, lan terus output sabanjuré. Elimko FT 10 Series Filter Timer - icon118 parameter nemtokake kahanan sirkuit mbukak, Elimko FT 10 Series Filter Timer - icon119 parameter nemtokake negara short circuit. Elimko FT 10 Series Filter Timer - icon119 parameter kudu disetel kanggo setengah saka resistance nominal saka selonoids,Elimko FT 10 Series Filter Timer - icon118  parameter kudu disetel kanggo kaping pindho saka resistance nominal saka selonoids.
4.2.2. ALARM TEKANAN Dhuwur
Piranti, sing nduweni kontrol tekanan menehi weker tekanan dhuwur miturut Elimko FT 10 Series Filter Timer - icon120 lan Elimko FT 10 Series Filter Timer - icon121 paramèter. Yen tekanan diferensial luwih dhuwur tinimbang Elimko FT 10 Series Filter Timer - icon120parameter, piranti menehi weker tekanan dhuwur. Kondisi weker rampung nalika maca tekanan diferensial mudhun dadi Elimko FT 10 Series Filter Timer - icon120 – Elimko FT 10 Series Filter Timer - icon121 .
4.2.3. NO SELONOID SUPPLY weker
Yen pasokan Selonoid piranti, sing disambungake (+ VSIN-) terminal rusak, piranti ora menehi weker pasokan selonoid.
4.2.4. SCAN AKTIF weker
Nalika input Mulai piranti sing ana ing terminal A24 (IN1) aktif, piranti menehi weker aktif pindai.
Kabeh weker iki ditampilake ing tampilan kanggo pangguna. Kajaba iku, yen piranti duwe komunikasi RS-485, weker bisa diwaca saka protokol Modbus.
4.3. SCANNING ORDER OF OUTPUT
Urutan mindhai piranti diwiwiti kanthi 1, lan dipungkasi kanthi 128 ing setelan pabrik. Urutan mindhai bisa dikonfigurasi nggunakake protokol Modbus. Register alamat paramèter pesenan iki kapacak ing Tabel 4.3

alamat Paramèter Properti alamat Paramèter Properti
100 OUT 1-2 R/W 132 OUT 65-66 R/W
101 OUT 3-4 RAN 133 OUT 67-68 R/W
102 OUT 5-6 R/W 134 OUT 69-70 R/W
103 OUT 7-8 R/W 135 OUT 71-72 R/W
104 OUT 9-10 R/W 136 OUT 73-74 R/W
105 OUT 11-12 RIW 137 OUT 75-76 R/W
106 OUT 13-14 R/W 138 OUT 77-78 R/W
107 OUT 15-16 R/W 139 OUT 79-80 R/W
108 OUT 17-18 R/W 140 OUT 81-82 R/W
109 OUT 19-20 RAN 141 OUT 83-84 R/W
110 OUT 21-22 R/W 142 OUT 85-86 R/W
111 OUT 23-24 R/W 143 OUT 87-88 R/W
112 OUT 25-26 R/W 144 OUT 89-90 R/W
113 OUT 27-28 R/W 145 OUT 91-92 R/W
114 OUT 29-30 R/W 146 OUT 93-94 R/W
115 OUT 31-32 R/W 147 OUT 95-96 R/W
116 OUT 33-34 R/W 148 OUT 97-98 R/W
117 OUT 35-36 R/W 149 OUT 99-100 R/W
118 OUT 37-38 R/W 150 OUT 101-102 R/W
119 OUT 39-40 R/W 151 OUT 103-104 R/W
120 OUT 41-42 R/W 152 OUT 105-106 R/W
121 OUT 43-44 R/W 153 OUT 107-108 R/W
122 OUT 45-46 R/W 154 OUT 109-110 R/W
123 OUT 47-48 R/W 155 OUT 111-112 R/W
124 OUT 49-50 R/W 156 OUT 113-114 R/W
125 OUT 51-52 R/W 157 OUT 115-116 R/W
126 OUT 53-54 R/W 158 OUT 117-118 R/W
127 OUT 55-56 R/W 159 OUT 119-120 R/W
128 OUT 57-58 R/W 160 OUT 121-122 R/W
129 OUT 59-60 R/W 161 OUT 123-124 R/W
130 OUT 61-62 R/W 162 OUT 125-126 R/W
131 OUT 63-64 R/W 163 OUT 127-128 R/W

Tabel 4.3. Parameter Konfigurasi Output Tabel Alamat Modbus
CATATAN1: Parameter, sing ditampilake ing Tabel 4.3 yaiku 16-bit. Kanggo exampParameter OUT8-1 kurang 2-bit nuduhake output pisanan, parameter OUT8-1 2-bit dhuwur nuduhake output kapindho. Ing ngisor example, output 5 powered pisanan, output3 powered sareh miturut OUT1-2 parameter. Parameter liyane dikonfigurasi kanthi cara sing padha.

OUT1-2 = 773
putra 8-bit = 3 ilk 8-bit = 5

CATETAN 2: Parameter 8-bit lan Dhuwur kudu disetel antarane 1 lan 128. Yen ora, nilai sing dikirim saka paramèter kasebut ora disimpen miturut protokol.

UNIT OUTPUT

Saben unit output duwe 16 output. Unit output komunikasi karo unit kontrol liwat terminal DATA. Yen sambungan iki rusak, unit output ora bisa digunakake. Sumber daya saka unit output diwenehake karo (+VSUP-) terminal. Saben unit output, sing disambungake menyang unit kontrol duwe alamat. Alamat iki diatur liwat jumper ing kertu unit output. Luwih saka siji unit ora kudu duwe alamat sing padha. Konfigurasi jumper alamat ditampilake ing. Tabel 5.1
(+VIN-) terminal unit output kudu disambungake menyang (-VOUT+) terminal unit kontrol. Yen ana masalah ing sambungan kasebut, kabeh selonoid diukur sirkuit mbukak lan output ora ana daya. Yen sistem panyaring duwe luwih saka siji klompok, siji unit output kudu digunakake kanggo unit pilihan grup. Pasokan selonoid unit iki kudu disambungake (+VSIN-) terminal unit kontrol.

Jumper Panjelasan Jumper Panjelasan
Elimko FT 10 Series Filter Timer - icon122 1. Kertu Output Elimko FT 10 Series Filter Timer - icon130 9. Kertu Output
Elimko FT 10 Series Filter Timer - icon123 2. Kertu Output Elimko FT 10 Series Filter Timer - icon131 10. Kertu Output
Elimko FT 10 Series Filter Timer - icon124 3. Kertu Output Elimko FT 10 Series Filter Timer - icon132 11. Kertu Output
Elimko FT 10 Series Filter Timer - icon125 4. Kertu Output Elimko FT 10 Series Filter Timer - icon133 12. Kertu Output
Elimko FT 10 Series Filter Timer - icon126 5. Kertu Output Elimko FT 10 Series Filter Timer - icon134 13. Kertu Output
Elimko FT 10 Series Filter Timer - icon127 6. Kertu Output Elimko FT 10 Series Filter Timer - icon135 14. Kertu Output
Elimko FT 10 Series Filter Timer - icon128 7. Kertu Output Elimko FT 10 Series Filter Timer - icon136 15. Kertu Output
Elimko FT 10 Series Filter Timer - icon129 8. cikic Karti Elimko FT 10 Series Filter Timer - icon137 Kartu Pilihan Kelompok

Tabel 5.1. Konfigurasi Jumper

ALAMAT KOMUNIKASI

alamat Paramèter Panjelasan Properti Min. Maks.
0 Data weker 1 Waca Tabel 1 R
1 Data weker 2 Waca Tabel 1 R
2 Data weker 3 Waca Tabel 1 R
3 Data weker 4 Waca Tabel 1 R
4 Data weker 5 Waca Tabel 1 R
5 Data weker 6 Waca Tabel 1 R
6 Data weker 7 Waca Tabel 1 R
7 Data weker 8 Waca Tabel 1 R
8 Data weker 9 Waca Tabel 1 R
9 Data weker 10 Waca Tabel 1 R
10 Data weker 11 Waca Tabel 1 R
11 Data weker 12 Waca Tabel 1 R
12 Data weker 13 Waca Tabel 1 R
13 Data weker 14 Waca Tabel 1 R
14 Data weker 15 Waca Tabel 1 R
15 Data weker 16 Waca Tabel 1 R
16 Data weker 17 Waca CATETAN 2 R
17 Elimko FT 10 Series Filter Timer - icon3 R
18 Elimko FT 10 Series Filter Timer - icon4 R/W -1999 SE H
19 Elimko FT 10 Series Filter Timer - icon5 R/W SE L 9999
20 Elimko FT 10 Series Filter Timer - icon6 R/W -1999 9999
21 Elimko FT 10 Series Filter Timer - icon178 Elimko FT 10 Series Filter Timer - icon143  

R/W

  

0

  

2
22 Elimko FT 10 Series Filter Timer - icon11 R/W 0 3
23 Elimko FT 10 Series Filter Timer - icon145 R/W -1999 9999
24 Elimko FT 10 Series Filter Timer - icon146 R/W -1999 9999
25 Elimko FT 10 Series Filter Timer - icon148 R/W 0 3
26 Elimko FT 10 Series Filter Timer - icon149 R/W -1999 9999
27 Elimko FT 10 Series Filter Timer - icon150 R/W 0 9999
28 Elimko FT 10 Series Filter Timer - icon151 Elimko FT 10 Series Filter Timer - icon152 R/W 0 1
29 Elimko FT 10 Series Filter Timer - icon153 R/W 0 15
30 Elimko FT 10 Series Filter Timer - icon154 Elimko FT 10 Series Filter Timer - icon155 R/W 0 1
31 Elimko FT 10 Series Filter Timer - icon156 Elimko FT 10 Series Filter Timer - icon157 R/W 0 1
32 Elimko FT 10 Series Filter Timer - icon158 R/W 0 15
33 Elimko FT 10 Series Filter Timer - icon159 Elimko FT 10 Series Filter Timer - icon160 R/W 0 1
34 Elimko FT 10 Series Filter Timer - icon161 R/W 1 9999
35 Elimko FT 10 Series Filter Timer - icon162 R/W 1 1000
36 Elimko FT 10 Series Filter Timer - icon163 R/W 1 9999
37 Elimko FT 10 Series Filter Timer - icon164 R/W 1 9999
38 Elimko FT 10 Series Filter Timer - icon165 R/W 1 128
39 Elimko FT 10 Series Filter Timer - icon166 R/W 1 16
40 Elimko FT 10 Series Filter Timer - icon167 R/W 0 50
41 Elimko FT 10 Series Filter Timer - icon168 R/W 0 OU H
42 Elimko FT 10 Series Filter Timer - icon169 R/W OU L 3000
43 Elimko FT 10 Series Filter Timer - icon170 Elimko FT 10 Series Filter Timer - icon171 R/W 0 1
 

44

 Elimko FT 10 Series Filter Timer - icon172 Elimko FT 10 Series Filter Timer - icon173  

R/W

  

0

  

3
45 Elimko FT 10 Series Filter Timer - icon174 Elimko FT 10 Series Filter Timer - icon175  

R/W

  

0

  

2
46 Elimko FT 10 Series Filter Timer - icon176 R/W 1 127
47 Elimko FT 10 Series Filter Timer - icon177 R/W 1 16

CATETAN 1: Piranti ndhukung fungsi nomer 03, 06 lan 16 saka protokol modbus. 03 Maca Register Holding, 06 Nulis Register Single lan 16 Nulis Register Multiple.
CATETAN 2: Ora Selonoid Voltage weker disimpen ing bit pisanan saka Data Weker 17, weker tekanan dhuwur disimpen ing bit kapindho saka Weker Data 17.
CATATAN3: Ing tabel, paramèter, kang alamat antarane 17 lan 47 diterangno ing 3.1 PARAMETER panjelasan.

TABEL

Tabel 1: Bit Data Weker

S O S O S O S O S O S O S O S O
Nomer Bit 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Data weker 1 O8 O7 O6 O5 O4 O3 O2 O1
Data weker 2 O16 O15 O14 O13 O12 O11 O10 O9
Data weker 3 O24 O23 O22 O21 O20 O19 O18 O17
Data weker 4 O32 O31 O30 O29 O28 O27 O26 O25
Data weker 5 O40 O39 O38 O37 O36 O35 O34 O33
Data weker 6 O48 O47 O46 O45 O44 O43 O42 O41
Data weker 7 O56 O55 O54 O53 O52 O51 O50 O49
Data weker 8 O64 O63 O62 O61 O60 O59 O58 O57
Data weker 9 O72 O71 O70 O69 O68 O67 O66 O65
Data weker 10 O80 O79 O78 O77 O76 O75 O74 O73
Data weker 11 O88 O87 O86 O85 O84 O83 O82 O81
Data weker 12 O96 O95 O94 O93 O92 O91 O90 O89
Data weker 13 O104 O103 O102 O101 O100 O99 O98 O97
Data weker 14 O112 O111 O110 O109 O108 O107 O106 O105
Data weker 15 O120 O119 O118 O117 O116 O115 O114 O113
Data weker 16 O128 O127 O126 O125 O124 O123 O122 O121

CATETAN: Ing tabel, huruf S ditampilake negara sirkuit cendhak, huruf O ditampilake negara sirkuit mbukak.
Tabel 2: Elimko FT 10 Series Filter Timer - icon10

Elimko FT 10 Series Filter Timer - icon192 Ora Kontrol
Elimko FT 10 Series Filter Timer - icon180 Kontrol ON / OFF
Elimko FT 10 Series Filter Timer - icon181 Kontrol Proporsional

Tabel 3: Elimko FT 10 Series Filter Timer - icon184

Elimko FT 10 Series Filter Timer - icon182 0-20 mA
Elimko FT Series Filter Timer - 20-0 mA
Elimko FT 10 Series Filter Timer - icon183 4-20 mA
Elimko FT 10 Series Filter Timer - icon185 20-4 mA

Tabel 4: Elimko FT 10 Series Filter Timer - icon186

Elimko FT 10 Series Filter Timer - icon36 Biasane mbukak
Elimko FT 10 Series Filter Timer - icon111 Biasane ditutup

Tabel 5: Elimko FT Series Filter Timer -1

Elimko FT 10 Series Filter Timer - icon36 Ngakoni weker aktif
Elimko FT 10 Series Filter Timer - icon23 Ngakoni weker ora aktif

Tabel 6:  Elimko FT 10 Series Filter Timer - icon189

Elimko FT 10 Series Filter Timer - icon36 Ngenteni wektu istirahat lan pulsa
Elimko FT 10 Series Filter Timer - icon23 Ora ngenteni break lan wektu pulsa

Tabel 7: Elimko FT 10 Series Filter Timer - icon191

Elimko FT 10 Series Filter Timer - icon179 Ora paritas
Elimko FT 10 Series Filter Timer - icon193 Paritas ganjil
Elimko FT 10 Series Filter Timer - icon194 Kesetaraan

Produsen / Dhukungan Teknis:

Elimko Electronic Production and Control Co. Ltd.
8. Cadde 21. Sokak No:16 Emek- Ankara / TURKI
Telpon: +90 312 212 64 50 Fax: +90 312 212 41 43
www.elimko.com.tr e-mail:elimko@elimko.com.tr
KY-FT10-0423-1

Dokumen / Sumber Daya

Elimko FT-10 Series Filter Timer [pdf] Manual pangguna
FT-10 Series Filter Timer, FT-10, Series Filter Timer, Filter Timer

Referensi

Ninggalake komentar

Alamat email sampeyan ora bakal diterbitake. Kolom sing dibutuhake ditandhani *