JORDAN JF-JA Helix Jammer Arm Attachments
Product Information
The JORDAN Helix Jammer Arm Attachments – Pair (JF-JA) is a set of arm attachments designed to be used with a fitness rack. These arm attachments are used for various exercises and workouts to target different muscle groups in the upper body.
The product is made of high-quality materials and is designed for durability and stability during workouts. It comes with all the necessary parts and hardware required for assembly.
Product Usage Instructions
WARNING: Assembly of the product should only be undertaken by an individual who has the necessary tools and knowledge to do so.
Tools Required:
- 1 x Socket Wrench (13mm, 17mm, 19mm)
- 1 x Spanner (13mm, 17mm, 19mm)
Assembly Steps:
Step 1:
Use the M12x80 bolt (8), M12 Washer (12), and M12 Nut (15) to secure the Nylon wheel (7) to the base of each arm (1).
Step 2:
Use the M10x20 bolt, M10 Washer (13), Nylon wheel (4), and M10 nut to attach the arm to the side plates. Make sure to insert the bush (6) into the jammer arm before bolting it to the side plates (3) and (2).
Step 3:
Attach the side plates (3) to either side of the rack uprights using the M8x110 bolt (9), M8 Washer (11), Nylon wheel (4), and M8 Nut (14) as shown in the diagram.
Safety & Maintenance Checks:
After assembly, it is important to perform safety and maintenance checks on the product regularly to ensure its safe and proper functioning. For any safety concerns or maintenance queries, please contact JORDAN Fitness using the following details:
Address: 56 Oldmedow Road, Hardwick Ind. Est. King’s Lynn, Norfolk, PE30 4JJ United Kingdom
Email: sales@jordanfitness.com
Phone: +44 (0) 1553 763 285
Website: www.jordanfitness.com
WARNING
Assembly of product should only be undertaken by an individual who has:
- Read and understood this manual
- Is familiar with assembling similar equipment
TOOLS REQUIRED
- 1 x Socket Wrench (13mm, 17mm, 19mm)
- 1 x Spanner (13mm, 17mm, 19mm)
PARTS INCLUDED
Assembly
- STEP 1
Use M12x80 bolt (8), M12 Washer (12) and M12 Nut (15) to secure Nylon wheel (7) to the base of each arm (1)
- STEP 2
Use M10x20 bolt, M10 Washer (13), Nylon wheel (4) and M10 nut to attach arm to side plates. Ensure bush (6) is inserted into jammer arm prior to bolting to side plates (3) and (2)
- STEP 3
Attach side plates (3) to either side of rack uprights using M8x110 bolt (9), M8 Washer (11) Nylon wheel (4) and M8 Nut (14) as per diagram
Safety & Maintenance Checks
Our service starts from as little as £199.
At Jordan we believe in Quality and strive to supply only premium products that we know will last…. but even the best products need a little care and attention.
To keep your kit in tip top shape we offer annual maintenance services on all your Jordan Equipment.
Once our checks are completed, you will receive a detailed report of all works undertaken and peace of mind that your kit is safe, functioning and the best it can be for your clients.
56 Oldmedow Road, Hardwick Ind. Est. King’s Lynn, Norfolk, PE30 4JJ United Kingdom
Registered in England 3267100 E&OE
+44 (0) 1553 763 285
sales@jordanfitness.com
www.jordanfitness.com
© 2022, JORDAN FITNESS LTD
Documents / Resources
 | JORDAN JF-JA Helix Jammer Arm Attachments [pdf] Instruction Manual JF-JA Helix Jammer Arm Attachments, JF-JA, Helix Jammer Arm Attachments, Jammer Arm Attachments, Arm Attachments |
