JONSBO T6 Handle Case
USER GUIDE
MODEL: T6
Product Specification:
- Color: Black/Silver
- Dimension: 185mm(W)*223mm(D)*332mm(H) (with case stand 10mm)
- Material: 3mm Aluminum alloy +1 mm Steel+Wood
- Drive Bay: 2.5″ SSD*2
- Motherboard: ITX
- PCI Expansion Slot: 2
- Front 1/0 Port: Type-Cx1/USB3.0•1 (AUDlO•1+MIC•1 2 in 1)
- PSU Support: ATX:s;140mm
- Max. CPU Cooler Height: :s;160mm
- Max. Display Card Length: :s;215mm
- Cooling System: Front 120mm*1 or 140mm*1 Rear 120mm*1
- Weight: Net 3.5 kg
1. Parts List
2. Parts Diagram
1. Handles
2. Aluminum top cover
3. PCIE cover
4. PCIE card strip
5. Glass side panel
6. Aluminum bottom cover
7. Aluminum feet
8. Wood veneer
9. Aluminum front panel
10. Front panel filler
10. Main body
11. Aluminum side panel
3. Before installing the hardware, remove the side panels and bottom panel on both sides
3.1 Use an internal hex wrench to unscrew the aluminum side panel screws.
3.2 Use an inner hex wrench to unscrew the bottom plate screw.
3.3 Use an inner hex wrench to unscrew the bottom plate screw.
4. Power supply installation
The power supply is placed into the chassis from the bottom and locked with screws.
5. Cable management
Before installing the motherboard, arrange the power cables as shown in the diagram.
6. Motherboard installation.
The motherboard is placed in the area shown and locked with screws.
7. Graphics Card Installation
7.1 Use an internal hex wrench to unscrew the front panel screws.
7.2 Use an internal hex wrench to unscrew the PCIE cover and remove the PCIE card strip.
7.3 Insert the graphics card into the motherboard slot and lock it with screws.
8. SSD hard drive installation
8.1 Assemble the SSD hard drive with screws and washers.
8.2 Place the assembled hard drive into the corresponding hole and push it forward into the card slot.
9. Fan installation
Front panel 120mm*1 or 140mm*1 fan, rear panel 120mm*1 fan
10. Front fan fitter installation
The fan screw passes through the filter and front panel to lock the fan.
11. Install the handle
11.1 Use an internal hex wrench to unscrew the top plate screws.
11.2 The wooden handle is assembled on the top plate with screws and aluminum posts.
12. Front panel, side panel, top panel, bottom panel installation /
Use an inner hex wrench to install the front, side, top and bottom panels
Dongguan Sibositong Industrial Co., Ltd.
No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong Province, 523651, China
© 2023 Dongguan Sibositong Industrial Co., Ltd. All right reserved. Specifications are subject to change without prior notice. Some trademark may be claimed as the property of others.
Documents / Resources
 | JONSBO T6 Handle Case [pdf] User Guide T6 Handle Case, T6, Handle Case, Case |
