JONSBO N10 4.54L Mini ITX Compact

Package Content

Connectors

• The connector diagram only shows the line sequence relationship.
• Please refer to the actual product for functions.

Parts Diagram

Parts

1. Aluminum top cover
2. Aluminum body
3. Aluminum bottom cover
4. Foot / Fußbasis
5. Hard disk bracket,

Installation Guide

1. Pinch the pull strap and pull it upward to open the aluminum top cover
2. Use a screwdriver to remove the 4 screws on the bottom plate and remove the aluminum bottom cover

PSU installation

• The power supply is installed in the chassis and fixed with screws.

Cable management

• Before installing the motherboard, arrange the power cables as shown in the diagram

Motherboard installation

• The motherboard is placed in the diagram area and fixed with screws

2.5″ SSD hard drive 01

• Remove the screws and remove the hard disk bracket

2.5″ SSD hard drive 02

1. Put the 2.5″ SSD hard disk into the hard disk bracket and lock it with screws on both sides
2. Assemble the hard disk bracket and put it into the chassis and lock it with screws

SATA adapter cable installation

1. Plug the SATA cable into the hard disk
2. Connect the large 4P to the power supply

Install the top cover/bottom plate

• Install the top cover/bottom plate

Foot installation

1. Tear off the foot film
2. Stick it on the bottom or side according to needs

CONTACT

Dongguan Sibositong Industrial Co„ Ltd.

• No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong Province, 523651, China
• 2023 Dongguan Sibositong Industrial Co., Ltd. All rights reserved. Specifications are subject to change without prior notice. Some trademarks may be claimed as the property of others.

Documents / Resources

JONSBO N10 4.54L Mini ITX Compact [pdf] User Guide N10 4.54L Mini ITX Compact, N10, 4.54L Mini ITX Compact, ITX Compact, Compact

References

• User Manual