jONSBO CR-3000 ARGB CPU Fan User Manual
Chapter 1 – Part List
Chapter 2 – Intel Installation
Place the set screw in the corresponding hole position of the Intel bracket, and then insert the gasket
Install the back plate and fastener
Install the 2011 screw onto the CPU bracket, install the fastener and fix it with nuts
Apply heat conduction paste on the CPU
Remove copper bottom protective film
Place the heat sink on the CPU and fix it on the installation fastener
Connect the fan lead to the main board according to the figure above
Chapter 3 – AMD Installation
Remove the AMO mounting bracket and keep its original backplane
Installing the backplane
AMD Befestigung installieren
Rendering of installation completion
Apply heat conduction paste on the CPU
Remove copper bottom protective film
Place the heat sink on the CPU and fix it on the installation fastener
Connect the fan lead to the main board according to the figure above
CR-3000series
JONSBO Technology Co., Ltd.
No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong Province, 523651, China
JONSBO Technology Co., Ltd.
No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City,
Guangdong Province, 523651, China
Documents / Resources
 | jONSBO CR-3000 ARGB CPU Fan [pdf] User Manual CR-3000, CR-3000 ARGB CPU Fan, ARGB CPU Fan, CPU Fan, Fan |