Universal Infrared Remote Control App
Product Information
Jinvocloud
Specifications:
- Product Name: Universal Infrared Remote Control R11 R4Z
- Compatibility: Smart Life APP
- Features: Control various household appliances through infrared
signals
Product Usage Instructions
Step 1: Download Smart Life APP
Download and install the Smart Life APP on your smartphone or
tablet from the respective app store.
Step 2: Search for Devices
- Open the Smart Life APP.
- Click on Wired Gateway to start searching for devices.
- Confirm that the blue light on the universal infrared remote
control is blinking rapidly.
Step 3: Add Remote Control
- Do not leave the page while searching for devices.
- Wait until the universal infrared remote control appears inside
the wired gateway. - Select the type of household appliance.
- Selective fast matching by choosing the brand of the household
appliance. - Press the switch button to check if you can control the
appliance. - Press the 3 control buttons again to verify control.
- If the device can be controlled, it is successfully added.
Step 4: Control Appliances
Once added, appliances will be displayed in the control page,
and you can change the name of the appliance as needed.
Frequently Asked Questions (FAQ)
Q: How do I reset the remote control?
A: To reset the remote control, press and hold the reset button
for 10 seconds until the LED indicator flashes rapidly.
Q: Can I use the remote control with multiple devices?
A: Yes, you can add and control multiple devices using the Smart
Life APP and the universal infrared remote control.
Universal infrared remote control R11 R4Z use introduction
Download the Smart Life APP
Open the Smart Life APP, Click on Wired Gateway to start searching for devices, Confirm that the blue light of the universal infrared remote control is blinking rapidly.
Wired Gateway Do not leave this page while searching for devices, Until the universal infrared remote control appears inside the wired gateway.
Select the type of household appliance,Selective fast matching, Choose the brand of household appliance.
Press the switch button to see if you can control the appliance, Press the 3 control buttons again to check whether all of them can be controlled, If the device can be controlled, the device is successfully added.
Appliances will be displayed in the control page, and you can change the name of the appliance.
Documents / Resources
 | Jinvocloud Universal Infrared Remote Control App [pdf] User Guide Universal Infrared Remote Control App, Infrared Remote Control App, Remote Control App, Control App |