JIECANG JCHR35W6A1 Hand Hled Remote Controller
Product Info
- JCHR35W6A1
16-channel remote controller Application: Roller shade/Curtain
- JCHR35W6A2
Single channel remote controller Application: Curtain
- JCHR35W6A3
Single channel dual control remote controller Application: Curtain
- JCHR35W6A4
16-channel remote controller Application: Venetian blind
- JCHR35W6A5
Single channel remote controller Application: Venetian blind
a.Front
- JCHR35W6A1
- JCHR35W6A2
- CHR35W6A3
- JCHR35W6A4
- JCHR35W6A5
b. Back
d. Low Voltage Warning
(only apply to JCHR35W6A2/A3/A5)
c. For operations’ please refer to the motor operation instruction
Models & Parameters
(more info please refer to the nameplate)
| Electrical Specification | Standard |
| Battery Type | AAA battery*2 |
| Working Temperature | -10’C-50’C |
| Radio Frequency | 433.92M ± 1 00KHz |
| Transmit Distance | >=30m indoor |
Caution!
- The transmitter should not be exposed to moisture or impact, so as not to affect its life.
- During use, when the remote control distance is significantly shorter or less sensitive, please check whether the battery needs to be replaced.
- When the voltage is too low, JCHR35W6A2/A3/A5 orange LED will flicker during operation, JCHR35W6A1/A4 LCD screen digital display will be weak, indicating to replace the battery.
- Please properly dispose of used batteries according to the local garbage classification and recycling policy.
Instructions
a . Number of Channels Setting (only apply to JCHR35W6A1/A4)
Note: Max&Min number is 16&1 when it”s set under channel 1-16.
Documents / Resources
 | JIECANG JCHR35W6A1 Hand Hled Remote Controller [pdf] User Manual JCHR35W6A1, JCHR35W6A2, JCHR35W6A3, JCHR35W6A4, JCHR35W6A5, JCHR35W6A1 Hand Hled Remote Controller, JCHR35W6A1, Hand Hled Controller, Remote Controller, Controller |
