KML509 Mini Bubble Machine
Specifications:
- Product: Mini Bubble Machine
- Model: KML509
- Input Voltage: 220V-240V
- Rated Power: 30W
- Fuse: 3A
- Weight: 2.2KG
- Size: L25 x W24 x H23 CM
Product Usage Instructions:
Unpacking:
Open the package and inspect the device for any damage during
transportation. Ensure there are no exposed wires before turning on
the device to prevent any safety hazards.
Operation:
- Ensure the input power matches the rated voltage.
- Turn on the device when ready to use.
- Remember to turn off the device when not in use to prolong its
service life.
Additional Safety Information:
Follow all safety guidelines provided in the manual to prevent
misuse or damage that could void the warranty.
FAQ:
Q: What should I do if the device is not producing
bubbles?
A: Check the power source, ensure the device is properly
assembled, and clean the bubble-making components as instructed in
the manual.
Q: Can I use a different power source than the rated
voltage?
A: It is recommended to use the specified input voltage to avoid
damaging the device or reducing its lifespan.
Mini Bubble Machine
KML509
User Manual
Thank You for Purchasing! We appreciate your choice to purchase our product. To ensure safe and proper use, please read this manual carefully before operating the device and keep for future reference.
Thank you for purchasing this device. For the sake of safety and regular operation of this product, please read this manual carefully before using and operating it.
Product Introduction:
The device has the advantage of fashionable outline, compact size and light in weight.
Unpacking: Open the package and go through the device to see if any damage caused on the way of transportation. Before turning it on, be sure that the device is safe and there are no exposed wires. Please make sure that the mains voltage within the scope manual show otherwise you can greatly reduce the lifespan of the bubble’s. Any miss-use or damage will void our warranty.
Operation: 1. Make sure the input power is complied with rated voltage,then
turn on it. 2. When not used,turn off device to extend the service time.
Additional safety information:
· PLS be sure to turn off the device before installation and maintenance
· PLS be sure when operating the device you have good ventilation.
· This device is design for indoor use. PLS keep it dry whenever using. Install and maintenance should be done by an AVE Authorised dealer or service agent.
· Do not use other voltage that not complied with the instruction showed.
· Do not stare at the bubbles source, it may damage you eyes. · Do not operate unless there is stable voltage. · Do not use it in a moist environment.
Technical Parameters:
John Hornby Skewes & Co. Ltd.
Salem House, Parkinson Approach, Garforth,
Leeds LS25 2HR, United Kingdom.
www.jhs.co.uk
Authorised EU Representative: Pieters Musical Agencies Sparrelaar 19, 5467 JP Veghel, Netherlands
CE! t!}
Input Voltage Rated Power Fuse Weight Size
220v-240v 50Hz 30W 3A 2.2KG
(L25XL24xH23) CM
Documents / Resources
 | JHS KML509 Mini Bubble Machine [pdf] User Manual KML509, KML509 Mini Bubble Machine, KML509, Mini Bubble Machine, Bubble Machine, Machine |