jcm technology IP65 KEEpad Motion Transmitter User Guide
Specifications
- MOTION keyboard, 3 channels 868 MHz ·
- IP65
- 3 batteries AAA 1,5V
- Autonomy: 2 years/6000 activations
- -20 / +55 ºC
Configure password
Wake up
Enter configuration mode
Choose channel (1,2 or 3)
Enter current password (4-8 digits + OK)
Enter new password (4-8 digits + OK)
If you do not remember the current password, you must reset the device (see the installer guide)
Problem solving
See our website for troubleshooting: www.jcm-tech.com/JCM/keepad-keepush/
Normal use
Wake up the device
Enter password + OK
After 3 wrong trials the system is locked for 2 minutes. The anti-spy feature allows you to press random numbers before entering the password: the keypad only uses the last digits
Batteries replacement
Unscrew device and slide on wall support
Unscrew back cover
Replace batteries (3 x 1,5Vdc AAA type)
When batteries are near to the end of its useful life time, the indicator flashes.
EC Declarations of Conformity
The manufacturer JCM TECHNOLOGIES declares that the product KEEPAD complies with the relevant fundamental requirements of the RED Directive 2014/53/EU and of the RoHS Directive 2011/65/EU.
JCM TECHNOLOGIES, SA COSTA D’EN PARATGE, 6B – 08500 VIC (BARCELONA) SPAIN
See web www.jcm-tech.com/declarations/
Documents / Resources
 | jcm technology IP65 KEEpad Motion Transmitter [pdf] User Guide IP65 KEEpad Motion Transmitter, IP65, KEEpad, Motion Transmitter |
