WAVE Beam True Wireless Earbuds

JBL -logo

JBL WAVE Beam True Wireless Earbuds-

WHAT’S IN THE BOX

JBL WAVE Beam True Wireless Earbuds-fig1

https://register.jbl.comutm_medium=US&utm_source=QSG

JBL -icon1 APP

JBL -icon JBL Headphones

GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH THIS FREE APP.

JBL -qr1

https://storage.lscloud.harman.com/Testing/MyJBLHeadphones/QRCodeDownload/appstore/jblheadphone.html

JBL -qr2

https://storage.lscloud.harman.com/Testing/MyJBLHeadphones/QRCodeDownload/appstore/jblheadphonecn.html

JBL -br

JBL -icon2 HOW TO WEAR

  1. Try different sizes for a perfect fit and audio performance.
    JBL WAVE Beam True Wireless Earbuds-fig2
  2. JBL WAVE Beam True Wireless Earbuds-fig3

JBL -icon3 FIRST TIME USE

JBL WAVE Beam True Wireless Earbuds-fig4

POWER ON & CONNECT

JBL WAVE Beam True Wireless Earbuds-fig5

JBL -icon4 DUAL CONNECT

JBL WAVE Beam True Wireless Earbuds-fig6

CONTROLS

JBL WAVE Beam True Wireless Earbuds-fig7

JBL WAVE Beam True Wireless Earbuds-fig8

JBL -icon5 VOICEAWARE

JBL WAVE Beam True Wireless Earbuds-fig9

JBL -icon6 POWER OFF

JBL WAVE Beam True Wireless Earbuds-fig10

MANUAL SETUP

JBL WAVE Beam True Wireless Earbuds-fig11

JBL -icon DO MORE WITH THE APP

JBL WAVE Beam True Wireless Earbuds-fig12

CHARGING

JBL WAVE Beam True Wireless Earbuds-fig13

JBL -icon7 LED BEHAVIORS

JBL WAVE Beam True Wireless Earbuds-fig14

JBL -icon8 TECH SPEC

Model: WAVE BEAM
Driver size: 8 mm/ 0.315” Dynamic Driver
Power supply: 5 V  1 A
Earbud: 4.4 g per pc (8.8 g combined)/
0.0097 lbs per pc (0.0194 lbs combined)
Charging case: 39.5 g/ 0.0871 lbs
Earbud battery type: Lithium-ion polymer (48 mAh/ 3.85 V)
Charging case
battery type:
Lithium-ion polymer (530 mAh/ 3.7 V)
Charging time: <2 hrs from empty
Music playtime with
BT on:
8 hrs
Talk time: 4.5 hrs
Frequency response: 20 Hz – 20 kHz
Impedance: 16 ohm
Sensitivity: 100 dB [email protected] kHz
Maximum SPL: 95 dB
Microphone sensitivity: -38 dBV/[email protected] kHz
Bluetooth version: 5.2
Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
Bluetooth transmitter power: <15 dBm
Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
Maximum operation temperature: 45 °C

warning 4TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.

This equipment complies with Directive 2014/53/EU radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by European Union market(France). These requirements set a SAR limit of 2W/kg averaged over ten gram of tissue. The highest SAR value 0.221W/kg reported under this standard during product certification for use when properly worn on the head.

warning 4 WARNING

DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

JBL -icon9JBL -icon10

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

HP_JBL_WAVE BEAM_QSG_Global_SOP_V12

Documents / Resources

JBL WAVE Beam True Wireless Earbuds [pdf] User Guide
WAVE Beam True Wireless Earbuds, WAVE Beam, True Wireless Earbuds, WAVE Beam Earbuds, Beam Earbuds, WAVE Earbuds, Earbuds, TWS Earbuds

Leave a comment

Your email address will not be published. Required fields are marked *