JBL LogoJBL Vibe Flex Wireless Black Earbuds 1

WHAT’S IN THE BOX

JBL Vibe Flex Wireless Black Earbuds

JBL Vibe Flex Wireless Black Earbuds - Qrhttps://register.jbl.com.utm_medium=US&utm_source=QSG

APP

JBL Headphones

JBL Vibe Flex Wireless Black Earbuds - Qr 1https://storage.lscloud.harman.com/Testing/MyJBLHeadphones/QRCodeDownload/appstore/jblheadphone.html

How to wear

JBL Vibe Flex Wireless Black Earbuds - Fig

FIRST TIME USE

JBL Vibe Flex Wireless Black Earbuds - Fig 1

POWER ON & CONNECT

JBL Vibe Flex Wireless Black Earbuds - Fig 2

DUAL CONNECT

JBL Vibe Flex Wireless Black Earbuds - Fig 3

CONTROLS

JBL Vibe Flex Wireless Black Earbuds - Fig 4

VOICEAWARE

JBL Vibe Flex Wireless Black Earbuds - Fig 5

power off

JBL Vibe Flex Wireless Black Earbuds - Fig 6

MANUAL SETUP

JBL Vibe Flex Wireless Black Earbuds - Fig 7

DO MORE WITH THE APP

JBL Vibe Flex Wireless Black Earbuds - Fig 8

CHARGING

JBL Vibe Flex Wireless Black Earbuds - Fig 8

 

LED BEHAVIORS

JBL Vibe Flex Wireless Black Earbuds - Fig 10

TECH SPEC JBL Vibe Flex Wireless Black Earbuds - icon 2

Model: VIBE FLEX Impedance: 16 ohm
Driver size: 12 mm/ 0.472” Dynamic Driver Sensitivity: 105 dB SPL@1 kHz
Power supply: 5 V  1 A Maximum SPL: 95 dB
Earbud: 3.8 g per pc (7.6 g combined)/
0.00838 lbs per pc (0.01676 lbs combined)
Microphone sensitivityBluetooth version: -38 dBV/Pa@1 kHz
Charging case: 35.1 g/ 0.07738 lbs Bluetooth profile version: 5.2
Earbud battery type: Charging case Lithium-ion polymer (40 mAh/ 3.85 V) Bluetooth transmitter frequency range: A2DP V1.3, AVRCP V1.6, HFP V1.7
Charging time: Lithium-ion polymer (500 mAh/ 3.8 V) Bluetooth transmitter power: 2.4 GHz – 2.4835 GHz
Music playtime with BT on: <2 hrs from empty Bluetooth transmitter modulation: <13 dBm
Talk time: 8 hrs Maximum operation temperature: GFSK, π/4-DQPSK, 8DPSK
Frequency response: 4.5 hrs 20 Hz – 20 kHz 45 °C

Warning-icon.png TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLVFLEX) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.7068W/kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLVFLEX

JBL Vibe Flex Wireless Black Earbuds - iconJBL Vibe Flex Wireless Black Earbuds - icon 1

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Warning icon WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT |MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

JBL LogoHP_JBL_VIBE FLEX_QSG_US+EMEA_SOP_V7

Documents / Resources

JBL Vibe Flex Wireless Black Earbuds [pdf] User Guide
Vibe Flex, Wireless Black Earbuds, Black Earbuds, Wireless Earbuds, Earbuds

References

Leave a comment

Your email address will not be published. Required fields are marked *