JBL logo

HARMAN
quick start guide
BC
JBL Tune115 TWS True Wireless Earbuds

WHAT’S IN THE BOX

JBL Tune115 TWS True Wireless Earbuds - hadphon

HOW TO WEAR

JBL Tune115 TWS True Wireless Earbuds - hadphon 1

FAST TIME USE

JBL Tune115 TWS True Wireless Earbuds - hadphon box

POWER& CONNECT

JBL Tune115 TWS True Wireless Earbuds - hadphon box 2

PAIRING

JBL Tune115 TWS True Wireless Earbuds - blutooth

POWER OFF

JBL Tune115 TWS True Wireless Earbuds - power

MANNUAL CONTROLS

JBL Tune115 TWS True Wireless Earbuds - hadphon box 6

BUTTON COMMANDnOISE Air Buds True Wireless Earbuds - icon7

JBL Tune115 TWS True Wireless Earbuds - BUTTON COMMAND1

 

CHARGING

JBL Tune115 TWS True Wireless Earbuds - Charging

LED BEHAVIORS

JBL Tune115 TWS True Wireless Earbuds - led

TECH SPEC

JBL Tune115 TWS True Wireless Earbuds - icon

Model: TUNE115TWS
Driver size: 5.8 mm / 0.23” Dynamic driver
Power supply: 5 V Direct Current0.5 A
Weight: 51.8 g / 0.114 lbs
Earpiece: 5.15 g / 0.0114 lbs / pc (10.3 g / 0.0227 lbs combined)
Charging case: 41.5 g / 0.0915 lbs
Headset battery type: Lithium-ion Battery (55 mAh / 3.7 V)
Charging case battery type: Lithium-ion Battery (410 mAh / 3.8 V)
Charging time: < 2 hrs from empty
Music playtime with BT on: up to 6 hrs
Frequency Response: 20 Hz – 20 kHz
Impedance: 14 ohm
Maximum SPL: 95 dB
Sensitivity: 108 dB [email protected] kHz / 1 mW
Microphone sensitivity: -38 [email protected] kHz / Pa
Bluetooth version: 5
Bluetooth profile version: A2DP 1.3, AVRCP 1.6, HFP 1.7
Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
Bluetooth transmitter power: < 12 dBm
Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
Maximum operation temperature: 45 °C

WarningTO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC:6132A-TUNE115TWS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.197W/kg.The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna. IC:6132A-TUNE115TWSJBL logo 1

Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

CE SYMBOLFCC ID: APITUNE
FCC ID: APITUNE115115TWSTWS
JBL Tune115 TWS True Wireless Earbuds - hadphon box 4
210-142313

Documents / Resources

JBL Tune115 TWS True Wireless Earbuds [pdf] User Guide
Tune115 TWS True Wireless Earbuds

Leave a comment

Your email address will not be published.