JBL - logoQUANTUM610 HEADSET WIRELESS
User GuideJBL QUANTUM610 HEADSET WIRELESS

JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works. JBLquantum.com/engine
Software requirements
PLATFORM: Windows 7 (64 bit) / Windows 10 (64 bit) only 500MB of free hard drive space for installation
*Always use the latest version of Windows 10 for the most optimal experience on JBL QuantumENGINE
*JBL QuantumSURROUND and DTS Headphone:X V2.0 are available on Windows only. Software installation is required.

JBL QUANTUM610 HEADSET WIRELESS - icon 1WHAT’S IN THE BOX

JBL QUANTUM610 HEADSET WIRELESS - figure 1

JBL QUANTUM610 HEADSET WIRELESS - icon 2Requirements

JBL QuantumENGINE SOFTWARE REQUIREMENTS
PLATFORM: WINDOWS 7 (64 BIT) / WINDOWS 10 (64 BIT) ONLY 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION
SYSTEM COMPATIBILITY
PC I XBOrm I PLAYSTATION, H'” I MOBILE I MAC I VR

CONNECTIVITY PC PS4/PS5 XBOX™ NINTENDO SWITCH™ MOBILE MAC VR
3.5 mm Audio Cable Stereo Stereo Stereo Stereo Stereo Stereo Stereo
2.4G Wireless JBL QuantumSURROUNDTM 5 UTS HEADPHONE X V2 Stereo Not
Compatible
Stereo Not
Compatible
Stereo Stereo

JBL QUANTUM610 HEADSET WIRELESS - icon 4OVERVIEW

JBL QUANTUM610 HEADSET WIRELESS - figure 2

01 Game audio-chat balance dial 09 Voice Focus Boom Microphone
02 Volume Control 10 Flat-fold ear cup
03 Detachable Windshield foam 11* Microphone Mute / unMute
04* Notification LED for mic mute / unmute 12 POWER / 2.4G LED
05* RGB-lit JBL logo 13 POWER ON / OFF slider
06 CHARGING LED 14 2.4G PAIRING BUTTON
07 3.5mm Audio Jack 15 Volume Control
08 USB-C port 16 MIC MUTE BUTTON
JBL QUANTUM610 HEADSET WIRELESS - icon 5

JBL QUANTUM610 HEADSET WIRELESS - icon 6POWER ON & CONNECT

JBL QUANTUM610 HEADSET WIRELESS - figure 3

JBL QUANTUM610 HEADSET WIRELESS - icon 7SETUP

JBL QUANTUM610 HEADSET WIRELESS - figure 4

JBL QUANTUM610 HEADSET WIRELESS - icon 8BUTTON COMMAND

JBL QUANTUM610 HEADSET WIRELESS - figure 5

BL QUANTUM610 HEADSET WIRELESS - icon 9First-time setup

  1. Connect the headset to your PC via a 2.4G USB wireless connection.
  2. Go to “Sound Settings” -> “Sound Control Panel”.
  3. Under “Playback” highlight “JBL QUANTUM610 WIRELESS GAME” and select “Set Default” -> “Default Device”.
  4. Highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.
  5. Under “Recording” highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set Default” -> “Default Device”.
  6. In your chat application select “JBL QUANTUM610 WIRELESS CHAT” as the default audio device.
  7. Follow the onscreen instructions to personalize your sound settings.

JBL QUANTUM610 HEADSET WIRELESS - figure 6

JBL QUANTUM610 HEADSET WIRELESS - icon 10MICROPHONE

JBL QUANTUM610 HEADSET WIRELESS - figure 7

JBL QUANTUM610 HEADSET WIRELESS - icon 11CHARGING

JBL QUANTUM610 HEADSET WIRELESS - figure 8

JBL QUANTUM610 HEADSET WIRELESS - icon 12LED BEHAVIOURS

JBL QUANTUM610 HEADSET WIRELESS - figure 9

JBL QUANTUM610 HEADSET WIRELESS - icon 2TECH SPEC

Driver size: 50 mm Dynamic drivers
Frequency response: 20 Hz – 20 kHz
Microphone frequency response: 100 Hz -10 kHz
Max input power 30 mW
Sensitivity: 100 dB SPL @1 kHz / 1 mW
Maximum SPL: 95 dB
Microphone sensitivity: -40 dBV/Pa @1 kHz
Impedance: 32 ohm
2.4G Wireless transmitter power: <14 dBm
2.4G Wireless modulation: GFSK, π/4 DQPSK
2.4G Wireless carrier frequency: 2400 MHz – 2483.5 MHz
Battery type: Li-ion battery (3.7 V / 1000 mAh)
Power supply: 5 V TELEFUNKEN TF-1709 Radio with Alarm - 32 A
Charging time: 3 hrs
Music play time with RGB lighting off: 40 hrs
Microphone pickup pattern: Unidirectional
Weight: 357 g

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ610) have also been tested against this SAR limit According to this standard, the highest SAR  value reported during product certification for head use is 0.013 W/Kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a  separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ610TM) has also been tested against this SAR limit According to this standard, the highest  SAR value reported during product certification for head use is 0.099 W/Kg.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and  the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLQ610

Body operation
The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Non-compliance with the above restrictions may result in a violation of  IC RF exposure guidelines.
Use only the supplied or approved antenna.
IC: 6132A-JBLQ610TM

JBL QUANTUM610 HEADSET WIRELESS - ceFCC ID: APIJBLQ610

Documents / Resources

JBL QUANTUM610 HEADSET WIRELESS [pdf] User Guide
Q610TM, QUANTUM610, WIRELESS HEADSET, HEADSET

References

Leave a comment

Your email address will not be published.