JBL logoQuantum 610 Wireless Gaming Headset
Installation Guide 

JBL Quantum 610 Wireless Gaming Headset

JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works. JBLquantum.com/engine
Software requirements Platform: Windows 10 (64 bit only) / Windows 11 500MB of free hard drive space for installation *Always use the latest version of Windows 10 (64  it)  or Windows 11 for the most optimal experience on JBL QuantumENGINE
*JBL QuantumSURROUND and DTS Headphone:X V2.0 available on Windows only. Software installation is required.

JBL Quantum 610 Wireless Gaming Headset - iconWHAT’S IN THE BOX 

JBL Quantum 610 Wireless Gaming Headset - fig

JBL Quantum 610 Wireless Gaming Headset - icon1002 Requirements
JBL QUANTUM ENGINE SOFTWARE REQUIREMENTS
Platform: Windows 10 (64 bit only) / Windows 11
500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION
System compatibility
PC | Xbox™ | PlayStation™ | Nintendo Switch™ | Mobile | MAC | VR

Connectivity PC PS4/PS5 XBOX™ Nintendo Switch™ Mobile MAC VR
3.5 mm Audio Cable Stereo Stereo Stereo Stereo Stereo Stereo Stereo
2.4G Wireless JBL Quantum 610 Wireless Gaming Headset - icon12JBL QuantumSURROUND™ & DTS HEADPHONE: XV2 Stereo Not  Compatible Stereo Not Compatible Stereo Stereo

OVERVIEW

JBL Quantum 610 Wireless Gaming Headset - fig1
JBL Quantum 610 Wireless Gaming Headset - icon3

01 Game audio-chat balance dial
02 Volume Control
03 Detachable Windshield foam
04* Notification LED for mic mute / unmute
05* RGB-lit JBL logo
06 CHARGING LED
07 3.5mm Audio Jack
08 USB-C port
09 Voice Focus Boom Microphone
10 Flat-fold ear cup
11* Microphone Mute / unMute
12 POWER / 2.4G LED
13 POWER ON / OFF slider
14 2.4G PAIRING BUTTON
15 Volume Control
16 MIC MUTE BUTTON

POWER ON & CONNECT

JBL Quantum 610 Wireless Gaming Headset - fig3

SETUP

JBL Quantum 610 Wireless Gaming Headset - fig4

BUTTON COMMAND

JBL Quantum 610 Wireless Gaming Headset - icon6

JBL Quantum 610 Wireless Gaming Headset - fig5

First-time setup

JBL Quantum 610 Wireless Gaming Headset - fig6

7a Connect the headset to your PC via a 2.4G USB wireless connection.
7b Go to “Sound Settings” -> “Sound Control Panel”.
7c Under “Playback” highlight “JBL QUANTUM610 WIRELESS GAME” and select “Set Default” -> “Default Device”.
7d Highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.
7e Under “Recording” highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set Default” -> “Default Device”.
7f In your chat application select “JBL QUANTUM610 WIRELESSCHAT” as the default audio device.
7G Follow the onscreen instructions to personalize your sound settings.

JBL Quantum 610 Wireless Gaming Headset - icon8  MICROPHONE

JBL Quantum 610 Wireless Gaming Headset - fig7

JBL Quantum 610 Wireless Gaming Headset - icon9 CHARGING

JBL Quantum 610 Wireless Gaming Headset - icon10

JBL Quantum 610 Wireless Gaming Headset - icon11 LED BEHAVIOURS

JBL Quantum 610 Wireless Gaming Headset - icon13

TECH SPEC

Models: QUANTUM610M/QUANTUM610TMM
Driver size: 50 mm Dynamic drivers
Frequency response: 20 Hz – 20 kHz
Microphone frequency response:  Max 100 Hz -10 kHz
input power 30 mW
Sensitivity: 100 dB SPL @1 kHz / 1 mW
Maximum SPL: 95 dB
Microphone sensitivity: -40 dBV/Pa @1 kHz
Impedance: 32 ohm
2.4G Wireless transmitter power: <14 dBm
2.4G Wireless modulation: GFSK, π/4 DQPSK
2.4G Wireless carrier frequency: 2400 MHz – 2483.5 MHz
Battery type: Li-ion battery (3.7 V / 1000 mAh)  5 V
Power supply: 2:00 AM
Charging time: 3 hrs
Music play time with RGB lighting 40 hrs
off:  Microphone pickup pattern: Unidirectional
Weight: 357 g

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ610M) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.023 W/Kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain etal parts in its assembly. The use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ610TMM) has also been tested against this SAR limit According to  his standard, the highest SAR value reported during product certification for body use is 0.262 W/Kg.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLQ610M
Body operation
The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Non-compliance with the above restrictions may result in a violation of IC RF exposure guidelines. Use only the supplied or approved antenna.
IC: 6132A-JBLQ610TMM

JBL - LOGO.FCC ID: APIJBLQ610M
FCC ID: APIJBLQ610TMM

ERC symbolCE SYMBOL

Documents / Resources

JBL Quantum 610 Wireless Gaming Headset [pdf] Installation Guide
JBLQ610TMM, APIJBLQ610TMM, Quantum 610, Wireless Gaming Headset, Quantum 610 Wireless Gaming Headset

References

Leave a comment

Your email address will not be published.