UBL

JBL Tune 600BT Bluetooth Headphone

Product

What’s in the box box

  1. TUNE600BTN
  2. Charging cable
  3. Detachable audio cable with remote
  4. Warranty card, Warning card, Safety sheet, QSG

Overview

Buttons & LEDsOverview 1
Connections
Overview 2

Bluetooth Connection

  1. Turn on the headphoneBluetooth
  2. If connecting for the first time, the headphone will enter the pairing mode automatically after it is powered on
  3. Connect to Bluetooth device
Bluetooth 3

Controlling music Control Music

Managing phone calls Managing Phone calls

Wired listening modeListening Mode

Active noise cancelling (ANC)

  • ANC is on as factory default.
  • In wireless and wired listening mode, long press ANC button to switch it off and on.

ANC

LED behaviorLED

LED Table

TUNE600BT

  • Driver size: 32mm
  • Dynamic frequency response range: 20Hz-20kHz
  • Sensitivity: 1 OOdB
  • Maximum SPL: 95dB
  • Microphone [email protected] – 24dBV/Pa
  • Impedance: 32ohm
  • Bluetooth transmitted power: 0-4dbm
  • Bluetooth transmitted modulation: GFSK, n/400PSK, BDPSK
  • Bluetooth frequency: 2.402GHz-2.48GHz
  • Bluetooth profiles: HFP v1 .6, HSP v1 .2, A2DP v1 .2, AVRCP v1 .5
  • Bluetooth version: V4.1
  • Battery type: Polymer Li-ion Battery (3.7V, 610mAh)
  • Charging time: 2 hours
  • Talk time with BT on: 22 hours
  • Music play time with BT on and ANG off: 22 hours
  • Music play time with BT on and ANG on: 12 hours
  • Music play time with BT off and ANG on: 30 hours
  • Weight (g): 173g

Bluetooth icon

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Anatel

 

JBL Tune 600BT Bluetooth Headphone with ANC Quick Start Guide – Download [optimized]
JBL Tune 600BT Bluetooth Headphone with ANC Quick Start Guide – Download

Leave a comment

Your email address will not be published.