JBL Go2

JBL Go2 User Manual

 

1. What’s in the box

What’s in the box

2. Buttons

Buttons

3. Connections
Connections

4. Bluetooth®

1. Bluetooth connection

Bluetooth connection

2. Music control

Music control

5. Speakerphone
Speakerphone

6. LED indication
LED indication

7. Warning

Warning

JBL GO 2 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL GO 2 is waterproof, please remove all cable connections and tightly close the cap; exposing the JBL GO 2 to liquids without doing so may result in permanent damage to the speaker. And do not expose JBL GO 2 to water while charging, as doing so may result in permanent damage to the speaker or power source.

IPX7 waterproof is defined as the speaker can be immersed in water up to 1m for up to 30 minutes.

8. Specifications

• Bluetooth version: 4.1
• Bluetooth Profile: A2DP v1.2 AVRCP v1.5 HFP v1.6, HSP v1.2
• Transducer: 1 x 40mm
• Rated power: 3W
• Frequency response: 180Hz – 20kHz
• Signal-to-noise ratio: 80dB
• Battery type: Lithium-ion polymer (3.7V, 730mAh)
• Battery charge time: 2.5Hours
• Music playing time: up to 5 hours (varies by volume level and audio content)
• Bluetooth transmitter power: 0~4dBm
• Bluetooth transmitter frequency range: 2402~2480MHz
• Bluetooth transmitter modulation: GFSK/DQPSK/8DPSK
• Dimensions: 71.2 x 86.0 x 31.6 (mm)
• Weight: 130g

Bluetooth

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

ANATEL

Questions about your JBL Go 2 ? Post in the comments!
Download JBL Go2 Manual [PDF]

Join the Conversation

26 Comments

  1. Help please. I have paired my new jbl go2 with my samsung phone and tablet. I can listen to music from my tablet. But I can’t get anything from my phone. Can both be connected at the same time?What do I need to do?

    1. My JBL GO 2 problem
      While night time fully charged but morning we don’t use the speaker .
      Buttons no working .
      Only LED light on in red color

      What we do??

      1. Hello, the same thing happens to me, red light on and nothing works, I can’t turn it off or reset it either.
        Hola, a mi mesucede lo mismo, luz roja encendida y nada funciona, tampoco lo puedo apagar ni resetear.

    2. No. I had same problem and the Argos Product Support line helped a lot. I had to stop all my devices recognising the Go2 then ask for one to recognise it again.. . Even just switching off the bluetooth on the device did not allow it to work with another device.

  2. TheGO2 Speaker is connected via Analog cable and keeps going off, how do I keep it on?

  3. Hello, I’ve just bought the very good JBL GO 2. It’s great but….
    Why can’t I play it while it’s charging, it just switches off when I try to play music in the charge mode

  4. I am replacing my BROKEN laptop speakers with a JBL GO2.
    Is there a way to KEEP the GO2 on all the time without having it turn off automatically. I keep the power cord plugged in at all times.

    Thank you.

  5. I ‘ve got two Go2’s can I pair them up to each other for more Sound ala stereo??? If so what cable do I need . Thanks

  6. After I charged my JBL Go2 Speaker and disconnected it from the powersource, the LED is still red (permanently). The Box is not reacting to any pressed buttons. Even after several hours after disconnecting from the charger the LED is red, as of it would still charge.

    1. Press and hold the power button until the red light goes off, about 20 seconds. The best way to find answers is to enter the device name and add troubleshooting to your search.

  7. No se que pasó pero mi JBL go solo se conecte a mi celular al de mi pareja, ya no se conecta a la compu cuando antes si lo hacia. de rependen las compus de mi casa ya no lo detectan! tengo dos notebooks y ambas tienen bluetooth pero x alguna razon no lo detectan al aparato. q se puede hacer?

  8. “After I charged my JBL Go2 Speaker and disconnected it from the powersource, the LED is still red (permanently). The Box is not reacting to any pressed buttons. Even after several hours after disconnecting from the charger the LED is red, as of it would still charge.”
    Exactly the same happened to me, right after the first charging, and the box has been “dead” for almost 24h now. Was that it? If yes… What a miserable quality!

  9. cant seem to turn on my jbl go2, its stuck in its charging state even though ive already removed the charger.

  10. How do you actually use it? The instructions don’t tell you at all. I have guessed you have to charge it but then what?

  11. Hello,
    same question as Max, how to suppress too loud on and off sounds?

    Bonjour,
    même question que Max, comment supprimer les sons d’activation et de désactivation beaucoup trop bruyants ?

  12. My jbl go 2 speaker, when not plugged in, still shows the light is charging. So what is that error?
    Thank you.
    Loa jbl go 2 của em khi không cắm sạc nó vẫn hiện đèn báo là đang sạc. Vậy đó là lỗi gì vậy ạ
    Em cảm ơn.

  13. I wonder why I do not find an answer anywhere. Many questions about the expected red light and what happens when it does not light up, but the answer is nowhere to be found
    Απορω γιατι δεν βρισκω απάντηση πουθενα. Πολλα ερωτηματα για το αναμενο κοκκινο λαμπακι και τι γινεται που δεν αναβει, αλλα η απαντηση δεν υπαρχει πουθενα

Leave a comment

Your email address will not be published. Required fields are marked *