JBL Endurance Peak II Manual
JBL Endurance Peak II Quick Start Guide
JBL Endurance Peak II Quick Start Guide
JBL Endurance Peak II Box Content
JBL Endurance Peak II Box Content
JBL Endurance Peak II How to Wear
JBL Endurance Peak II How to Wear
JBL Endurance Peak II First Time Use
JBL Endurance Peak II First Time Use
JBL Endurance Peak II Power On & Connect
JBL Endurance Peak II Power On & Connect
JBL Endurance Peak II Pairing
JBL Endurance Peak II Pairing
JBL Endurance Peak II Pairing
JBL Endurance Peak II Pairing
JBL Endurance Peak II Power Off
JBL Endurance Peak II Power Off
JBL Endurance Peak II Manual Controls
JBL Endurance Peak II Manual Controls
JBL Endurance Peak II BUTTON COMMAND
JBL Endurance Peak II BUTTON COMMAND
JBL Endurance Peak II Charging
JBL Endurance Peak II Charging
JBL Endurance Peak II WATERPROOF IPX7
JBL Endurance Peak II WATERPROOF IPX7
JBL Endurance Peak II LED Behaviors
JBL Endurance Peak II LED Behaviors
JBL Endurance Peak II TECH SPEC
JBL Endurance Peak II TECH SPEC

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLENPEAK2) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.6712 W / kg. The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

IC: 6132A-JBLENPEAK2

Maximum operation temperature: 45°C

FCC ID: APIJBLENPEAK2

R210-144512

EAC Logo

Anatel Logo

Bluetooth IconThe Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

CE Logo

HP_JBL_Endurance Peak II_QSG_SOP_V11


JBL Endurance Peak II Manual – Optimized PDF
JBL Endurance Peak II Manual – Original PDF

Join the Conversation

15 Comments

  1. My JBL Endurance Peak II earphones did pair with my google pixel phone without requiring a pin. I have lost my left earphone and now the right earphone, which was working fine by itself for a while, will not connect without a pins. None of the standard pins work. I have tried resetting my connection settings on my phone as well as resetting the earphone. It blinks red/blue, meaning it is ready to pair, but it isn’t coming up with automatic connection on my phone like it used to. How do I fix this?

  2. I am having a hard time pairing my Google Pixel phone with this bluetooth earphones. Both was working fine but the right earbud does not pair anymore. I’ve tried resetting the earphones and my phone connection but it doesn’t seem to work. I’m disappointed.

  3. can’t pair to galaxy s9 phone asking for an app
    Could it be the android version causing the issue

  4. Is there no way to adjust volume on these? Even with the paired device turned to the max, the volume is incredibly low to the point that these are almost worthless.

  5. Right earbud lost pairing and will not rechonnect/repair. I have tried forgetting these and repairing and still nothing. Suggestions?

    1. I have just had this same problem. I was using it I put it in the case a couple hours later i go to use the right side and it won’t connect. I also tried to forget and reconnect several times and everything else i could think of, but nothing had worked.

  6. Hi,
    Can the controls be locked?? I like to wear a hoodie while working out but once I start to sweat the hoodie turns the music on and off.

Leave a comment

Your email address will not be published.