
JBL Clip3 Manual [Bluetooth Clip-on Speaker]
1. What’s in the box
2. Buttons
3. Connections
4. Bluetooth®
1. Bluetooth connection
2. Music control
5. Speakerphone
6. LED indication
7. Carabiner
IMPORTANT: The carabiner of JBL Clip 3 is not for climbing.
8. Warning
JBL Clip 3 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL Clip 3 is waterproof, please remove all cable connections and tightly close the cap; exposing the JBL Clip 3 to liquids without doing so may result in permanent damage to the speaker. And do not expose JBL Clip 3 to water while charging, as doing so may result in permanent damage to the speaker or power source.
IPX7 waterproof is defined as the speaker can be immersed in water up to 1m for up to 30 minutes. If the speaker will not be used for a long period of time, please recharge the battery at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
9. Specifications
• Bluetooth version: 4.1
• Support: A2DP V1.2, AVRCP V1.5, HFP V1.5, HSP V1.2
• Transducer: 1 x 40mm
• Output power: 1 x 3W
• Frequency response: 120Hz – 20kHz (-6dB)
• Signal-to-noise ratio: >80dB
• Battery type: Lithium-ion polymer (3.7V/1000mAh)
• Battery charge time: 3 hour @ 5V, 0.5A
• Music playing time: up to 10 hours (varies by volume level and audio content)
• Bluetooth transmitter power: 0 – 9dBm
• Bluetooth transmitter frequency range: 2.402 – 2.480GHz
• Bluetooth transmitter modulation: GFSK, /4 DQPSK, 8DPSK
• Dimensions (H x W x D): 137 x 97 x 46 (mm) \ 5.4″ x 3.8″ x 1.8″
• Weight: 210g \ 0.46 lbs
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Questions about your JBL Clip 3 ? Post in the comments!
Download JBL Clip 3 Manual [PDF]
Unable to connect to Bluetooth from my cell phone (Pixel 4). White light flashes rapidly. My cell phone shows Bluetooth on.
I am have the same problem, rapid white flashing light and can’t connect. Please help. thank you
Want to connect “Clip3” to Samsung lap-top. Presumably this is a wireless connection as there is no cable available, even though there is a socket available on the Clip3 for cable connection.
my jbl clip 3 all of the sudden wont play unless plugged into charger and now the white light is blinking, its not even a year old.
How do I create a Bluetooth connection between JBL Clip 3 speaker and my iPad 4?
I don’t no know how to use my clip3 as microphone.