JBL Ear Wireless Headphones User Guide

JBL Ear Wireless Headphones User Guide

WHAT’S THE IN BOX

how to wear

power & on connect

• POWER ON AND AUTOMATICALLY ENTER PAIRING MODE
• CHOOSE ” JBL  TUNE 115BT ” TO CONNECT

BUTTON COMMAND

MULTI – POINT CONNECTION

(MAXIMUM 2 DEVICES)

ENTER PAIRING MODE WITH THE 2nd DEVICE

1.  TO SWITCH MUSIC SOURCE, PAUSE THE MUSIC ON THE CURRENT DEVICE AND SELECT PLAY ON THE 2″ DEVICE.
2.  PHONE CALL WILL ALWAYS TAKE PRIORITY.
3. F ONE DEVICE GOES OUT OF BLUETOOTH RINE OR POWERS OFF. YOU MAY NEED TO MANUALLY RECONNECT THE REMAINING DEVICE.
4. SELECT “FORGET THIS DEVICE ON YOUR BLUETOOTH DEVICES TO DISCONNECT MULTI-POINT.
   
   1st                                                                            2nd
   BLUETOOTH DEVICE                           BLUETOOTH DEVICE 
                  CHOOSE ” JBL TUNE115BT ” TO CONNECT 

CHARGING

LED BEHAVIORS

TECH SPEC

• DRIVER SIZE: 8.6 mm dynamic driver
• FREQUENCY RESPONSE: 20 Hz — 20 kHz
• SENSITIVITY: 102 dB SPL@1kHz 1mW
• MICROPHONE SENSITIVITY: – 25 dBV/Pa @1kHz
• IMPEDANCE: 16 ohm
• BLUETOOTH TRANSMITTED POWER: <5 dBm
• BLUETOOTH TRANSMITTED MODULATION: GFSK/DQPSK/8DPSK
• BLUETOOTH FREQUENCY : 2.402 GHz – 2.480 GHz
• BLUETOOTH PROFILE VERSION: HFP V1.6, HSP V1.2, AVRCP V1.5, A2DP V1.2
• BLUETOOTH VERSION: 4.2
• HEADSET BATTERY TYPE: LITHIUM-ION BATTERY (3.7 V/160 mAh)
• POWER SUPPLY: 5 V 1 A
• CHARGING TIME: <2 hrs
• MUSIC PLAYTIME WITH BT ON: 8 hrs
• WEIGHT: 19.02 g

 

Documents / Resources

JBL Ear Wireless Headphones [pdf] User Guide TUNE115BT, in-Ear Wireless Headphones

References

• Anatel — Agência Nacional de Telecomunicações