JBC DPM-B DPM Manual Solder Paste Dispenser

This manual corresponds to the following reference:
DPM-B

Packing List

The following items are included:

Features

Syringe Sets*

The following syring barrel sets are available at www.jbctools.com

3cc Syringe Barrel Set Ref. SB03CC includes:

• Barrel 5 units
  Seal 5 units
• Cap 5 units
• Adapter 1 unit

5cc Syringe Barrel Set Ref. SB05CC includes

• Barrel 5 units
• Seal 5 units
• Cap 5 units

OPERATION

The DPM works with 3cc and 5cc Syringes. Ask your solder paste supplier for this format or fill the JBC syringe barrel with solder paste.

1. Seal Placement
   Take the barrel filled with solder paste and place the corresponding seal into the barrel.
2. . Plunger Placement
   1. 1. Pay attention to the fact that the plunger enters with its cylindrical part in the syringe barrel and the direcction of the teeth angle corresponds to the upper Otherwise, the DPM does not work properly.
      2. Insert the plunger into the seal and press the seal against the solder paste to eliminate the air inside the barrel.
3. Tip PlacementThread the tip onto the syringe barrel
4. Adapter Use (for 3cc Syringe only)For 3cc syringes the adaptor is needed. Assemble the adapter by clipping onto the barrel
5. Lever Lifting
   Open the DPM by lifting its upper part and the lever.
6. Syringe Insertion
   1. Insert the prepared syringe, including the plunger, into the DPM.
   2. Push the syringe down until it snaps into place and the barrel flange rests in the opening
7. Lever Positioning
   Lower the lever until it fits in with the plunger.
8. Dispensing
   Press the DPMs upper part downwards until solder paste comes out.
   Note: When the lever reaches the end of its stroke, the plunger is reloaded automatically by lifting and pressing down the DPMs upper part, the lever automatically jumps into the next plunger groove and the solder paste can be dispensed again.

Dispensing Needles* and Tapered Tips*

JBC offers two different types of dispensing tips, each type with different tip diameters. Availabel at www.jbctools.com.

Dispensing Needles with Stainless Steel Tips

STYLE	Ref.	COLOR	SOLDER PASTE (recomended)	GAUGE	ØID (mm/in)	ØOD (mm/in)	LENGTH (mm/in)	TOTAL LENGTH (mm/in)	QTY
Stainless Steel Needles	ND18S6	Green	Type 2	18	0.84/0.050	1.27/0.033	6.5/0.26	24/0.94	10
	ND20S6	Pink	Type 3	20	0.61/0.036	0.90/0.024
	ND21S6	Purple	Type 3	21	0.51/0.032	0.82/0.020
	ND22S6	Blue	Type 3	22	0.41/0.028	0.72/0.016
	ND23S6	Orange	Type 3	23	0.31/0.025	0.63/0.013
	ND25S6	Plan Red	Type 4	25	0.25/0.020	0.50/0.010
	ND27S6	Clear	Type 5	27	0.2/0.016	0.40/0.008
	ND30S6	Lavender	Type 6	30	0.15/0.012	0.31/0.006

Tapered Tips

STYLE	Ref.	COLOR	SOLDER PASTE (recomended)	GAUGE	ØID (mm/in)	ØOD (mm/in)	TOTAL LENGTH (mm/in)	QTY
Tapered Tips	ND18P	Green	Type 2	18	0.84/0.033	1.27/0.050	32/1.26	10
	ND20P	Pink	Type 3	20	0.64/0.024	1.20/0.048
	ND22P	Blue	Type 3	22	0.41/0.016	0.72/0.028
	ND25P	Red	Type 4	25	0.25/0.010	0.50/0.020
	ND27P	Clear	Type 5	27	0.2/0.008	0.40/0.016

Specifications

• DPM Manual Solder Paste Dispenser Ref.: DPM-B
• Dimensions/Net Weight:
  • 130 x 66 x 16 mm / 0.05 kg (L x W x H)
  • 12 x 2.60 x 0.63 in / 0.11 lb
• Package Dimensions/Weight:
  • 155 x 55 x 45 mm / 074 kg (L x W x H)
  • 6.10 x 2.17 x 1.77 in / 0.16 lb
• Complies with CE standards ESD Safe.

Warranty

JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.

Documents / Resources

JBC DPM-B DPM Manual Solder Paste Dispenser [pdf] Instruction Manual DPM-B DPM Manual Solder Paste Dispenser, DPM-B DPM, Manual Solder Paste Dispenser, Solder Paste Dispenser, Paste Dispenser, Dispenser

References

• User Manual