Categories: Jabra

Jabra Speak 750 Indoor Speaker User Manual

Jabra Speak 750 Indoor Speaker

Welcome
Thank you for using the Jabra Speak 750. We hope you will enjoy it!

Jabra Speak 750 features

  • Immersive sound for calls and music
  • Intuitive plug-and-play connectivity – connect to computer via USB or Bluetooth adapter, or connect to smartphone and tablet via Bluetooth
  • Lightweight design, protective travel pouch, and up to 11 hours of battery life
  • Dedicated Link button to pair two Jabra Speak 750 devices together for flexible and scalable meetings
  • Interact with your voice assistant with the one touch Smart button
  • Certified with all leading Unified Communications (UC) platforms

Overview

Where to position

Small-sized meeting room
For the optimal audio quality, position the speakerphone in the center of the table, up to 2.3m/7.5ft from each participant, but no closer than 0.5m/1.6ft. A single Jabra Speak 750 is ideal for up to 6 people

Medium-sized meeting room
For large meetings of up to 12 people in a single room, position two Jabra Speak 750 devices up to 4m/13ft apart, but no closer than 0.5m/1.6ft. Positioning them at either end of the table, between 0.5m/1.6ft to 2.3m/7.5 ft from participants, will ensure optimal audio quality.

To temporarily link the audio between two Jabra Speak 750 devices, tap the Link button on both speakerphones when they are within 4m/13ft.

Desk
When using the Jabra Speak 750 at your desk it is recommended to put the speakerphone into an upright position using the table stand. This will better direct the audio towards you for a richer music and media experience. Additionally, two Jabra Speak 750 devices can be linked together for stereo sound.

Stereo media
If you are displaying or viewing stereo media in a meeting or listening to music or media at your desk, two Jabra Speak 750 devices can be positioned on either side of a projector or monitor for stereo sound.

To temporarily link the audio between two Jabra Speak 750 devices, tap the Link button on both speakerphones when they are within 4m/13ft

How to charge

USB charging
Plug the Jabra Speak 750 into a USB power source using the attached USB cable. The Jabra Speak 750 battery lasts for up to 11 hours of talk time and takes approx. 3 hours to fully charge

Automatic power off
To preserve battery while unplugged, the Jabra Speak 750 will automatically power off when it has not been connected to a Bluetooth device for 15 minutes. If connected to a Bluetooth device and not plugged into power, the Jabra Speak 750 will automatically power off after 8 hours.

Battery status
To view the current battery status, tap the Battery status button. The LEDs around the edge of the Jabra Speak 750 will light up to indicate the current battery status.

How to connect

Connect to computer (Bluetooth adapter)
Plug the Jabra Link 370 Bluetooth adapter into a USB port on your computer. The Jabra Speak 750 and the Jabra Link 370 Bluetooth adapter are pre-paired and ready to use out of the box. The Bluetooth range is up to 30m/98ft. Before first time use, plug the USB cable into your computer to wake the speakerphone.

For the Jabra Speak 750 to work correctly, you may need to set the Jabra Link 370 Bluetooth adapter as the playback and recording device in your operating system’s audio settings. If you need to re-pair the Jabra Speak 750 with the Jabra Link 370 Bluetooth adapter, please use Jabra Direct. Jabra Direct can be downloaded at jabra.com/direct

Connect to computer (USB cable)
Plug the Jabra Speak 750 into a USB port on your computer. Before first time use, plug the USB cable into your computer to wake the speakerphone. You may need to set the Jabra Speak 750 as the playback and recording device in your operating system’s audio settings.

Connect to smartphone or tablet
Hold the Bluetooth button for 2 seconds and follow the voice-guided instructions to pair to your smartphone or tablet. The Bluetooth range is up to 10m/33ft. Before first time use, plug the USB cable into your computer to wake the speakerphone

How to use

Button visibility


The buttons are backlit and only visible when the speakerphone is powered on. After 1 minute of inactivity the buttons will fade, and can be reactivated by tapping the area where the buttons are located. The Smart button, Link button and Mute button will only be visible under certain conditions (see sections 6.4 and 6.5 for details).

Typical use

Link button
To temporarily link the audio between two Jabra Speak 750 devices, tap the Link button on both speakerphones when they are within 4m/13ft. The Link button will only be visible when two Jabra Speak 750 devices are within 4m/13ft.

Shared use
If the Jabra Speak 750 is to be shared by many people using Bluetooth, it is recommended to enable Shared use, which can be configured in Jabra Direct. When Shared use is enabled, the speakerphone will not automatically connect to a previously connected Smartphone or Jabra Link 370 Bluetooth adapter. Instead, the Bluetooth devices will need to be paired with the speakerphone each and every time the smartphone is out of range, or turned off and on. To pair a smartphone or Jabra Link 370 Bluetooth adapter to the speakerphone, hold (2 sec) the Bluetooth button on the speakerphone and follow the voice-guided instructions.

Factory reset
Resetting the Jabra Speak 750 clears the list of paired Bluetooth devices and also clears all personalized settings. After a factory reset, it is necessary to re-pair the Jabra Speak 750 to your Bluetooth devices and Jabra Link 370 Bluetooth adapter. To factory reset, hold the Answer call button and the End call button for 8 seconds until ‘Factory reset’ is announced by the speakerphone

Software and firmware

Jabra Direct
Jabra Direct is computer software designed to support, manage and enable optimal functionality for Jabra devices. Download the latest free version from jabra.com/direct

Update firmware
Firmware updates improve performance or add new functionality to Jabra devices

  1. Connect the Jabra Speak 750 to a computer using the USB cable or Jabra Link 370 Bluetooth adapter.
  2. Use Jabra Direct to check for the latest firmware updates. Jabra Direct can be downloaded from jabra.com/direct

Support

FAQ and technical specifications
View the FAQ, certifications, and technical specifications at jabra.com/help/speak750

How to care for your Jabra device

  • The Jabra Speak 750 is for indoor use only.
  • Avoid storage at extreme temperatures (above 40°C/113°F or below -40°C/-40°F).
  • Do not expose the Jabra Speak 750 to rain or other liquids.
  • Do not cover the Jabra Speak 750 speaker mesh and buttons with stickers or labels

Documents / Resources

Jabra Speak 750 Indoor Speaker [pdf] User Manual
Speak 750 Indoor Speaker, Speak 750, Indoor Speaker
Share

Recent Posts

fatboy 346 Hotspot Pillow Instruction Manual

346 Hotspot Pillow HOTSPOT FAMILY Instructions blanket - page 1 - 5 Instructions pillow -…

22 seconds ago

SPYCLOPS 1202WIP5AF IP Camera User Guide

1202WIP5AF IP Camera SPYCL@ps· SURVEILLANCE SYSTEMS IP Camera Quick Start Guide 02020 Metra Electronics Corporation…

24 seconds ago

ELECOM JC-W01U Gamepad Converter User Manual

JC-W01U Gamepad Converter Model: JC-W01U ENGLISH Manual Gamepad converter Name and function of each part…

1 min ago

boAt Wave Style Smartwatch User Manual

Wave Style Smartwatch

1 min ago

HEAVY DUTY TTCF-9A Cooler Line Flusher Instruction Manual

TTCF-9A Cooler Line Flusher 40201524 TTCF-9A Cooler Line Flusher Operations Manual Flo-Dynamics, Inc. · 3300…

2 mins ago

scheppach HC51V Compressor Instruction Manual

HC51V Compressor Art.Nr. 5906152901 AusgabeNr. 5906152901_0003 Rev.Nr. 17/05/2022 HC51V DE Kompressor Originalbedienungsanleitung GB Compressor Translation…

2 mins ago