Jabra Revo Wireless Bluetooth Stereo Headset
Jabra Revo Wireless
How do I pair my Jabra Revo Wireless with my mobile device?
To pair your Jabra Revo Wireless with your smartphone, tablet, or other mobile device using NFC, follow these steps.
- Turn on the Bluetooth setting on your mobile device.
- To enter pairing mode, slide and hold (3 seconds) the On/off/pairing switch in the “pairing” position until the Bluetooth light flashes blue.
- To pair, go to the Bluetooth menu on your mobile device and select the Jabra Revo Wireless from the list of available devices. Alternatively, wear the headphones to hear the pairing instructions. Enter “0000” (four zeros) if you are asked for a pin code.
If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device. For troubleshooting tips, see here. Optionally, try using the Bluetooth Pairing Guide which provides detailed steps for pairing with a mobile device.
Documents / Resources
|Jabra Revo Wireless Bluetooth Stereo Headset [pdf] User Manual|
Revo Wireless, Bluetooth Stereo Headset, Revo Wireless Bluetooth Stereo Headset, Stereo Headset, Headset