Jabra logo

Jbra Evolve 75 UC Stereo

How do I pair my Jabra Evolve 75 with my mobile device?

To pair your Jabra Evolve 75 with your smartphone, tablet, or another mobile device, follow these steps.

  1. Turn on the Bluetooth setting on your mobile device.
  2. To enter pairing mode, hold (3 seconds) the On/off/Bluetooth switch in the Bluetooth position until the LED flashes blue. Alternatively, wear the headset to hear the pairing instructions.
    The headset is now ready to pair with your mobile device.Jabra Evolve 75 UC Stereo Headset
  3. To pair, go to the Bluetooth menu on your mobile device and select the Jabra Evolve 75 from the list of available devices.
    Enter “0000” (four zeros) if you are asked for a pin code.

If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed steps for pairing with a mobile device.


Documents / Resources

Jabra Evolve 75 UC Stereo Headset [pdf] User Manual
Evolve 75 UC, Stereo Headset

Leave a comment

Your email address will not be published.