Jabra Evolve 65e UC Headphones


How do I pair my Jabra Evolve 65e with my mobile device

To pair your Jabra Evolve 65e with your smartphone, tablet, or other mobile device, follow these steps.

  1. Turn on the Bluetooth setting on your mobile device.
  2. Turn off your Jabra Evolve 65e by pressing and holding (3 seconds) the Multi-function button until the LED flashes red and the neckband vibrates.
  3. To enter pairing mode, press and hold (3 seconds) the Multi-function button until the LED flashes blue. If you are wearing the earbuds, you will hear the pairing instructions.
    Your earbuds are now ready to pair with your mobile device.Jabra-Evolve-65e-UC-Headphones-1
  4. To pair, go to the Bluetooth menu on your mobile device and select the Jabra Evolve 65e from the list of available devices. Enter “0000” (four zeros) if you are asked for a PIN.

If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device. For troubleshooting tips, see here. Optionally, try using the Bluetooth Pairing Guide which provides detailed steps for pairing with a mobile device. https://www.jabra.in/supportpages/jabra-evolve-65e/6599-629-109/faq/1020b03f-121a-431b-b00b-9b0240224fd0

Documents / Resources

Jabra Evolve 65e UC Headphones [pdf] Instructions
Evolve 65e UC, Headphones, Evolve 65e UC Headphones

Leave a comment

Your email address will not be published.