Jablotron

JABLOTRON JA-162M Wireless Input Module

JABLOTRON-JA-162M-Wireless-Input-Module

Specifications

  • Model: JA-162M
  • Type: 5INPUTUNI2201ND
  • Features: Wireless module with two universal inputs
  • Manufacturer: JABLOTRON

Product Information

The JA-162M is a wireless module for the JABLOTRON system with two independent universal inputs and the option to connect a tamper contact. It can be connected to various devices such as magnetic contacts, flood sensors, or when connected to the CT-01 roller shutter movement sensor, it can also be used to detect manipulation of external window shutters.

Installation:

  1. Install the JA-195PL or JA-194PL installation box.
  2. Screw the product into the prepared raised holes.
  3. Assign the module to the system by entering the serial number in the F-Link software.

Setting Input Properties

The input properties are set using the DIP switches. Select the desired mode according to Table 1. The module reads the NO/NC state of both input terminals when the batteries are inserted.

Replacing Batteries

The system automatically sends a report (Low battery voltage) when the battery voltage is critically low. Ensure to put the system in Service or Maintenance mode before replacing the batteries to avoid a sabotage alarm report.

Frequently Asked Questions (FAQ)

Q: How can I reset the module?
A: To reset the module, remove and reinsert the batteries while ensuring the input terminals are in standby mode.

Q: Can I use only one of the input terminals?
A: Yes, if only one input is used, you can remove the second input from the system to assign it for another device.

Documents / Resources

JABLOTRON JA-162M Wireless Input Module [pdf] Instruction Manual
JA-162M Wireless Input Module, JA-162M, Wireless Input Module, Input Module, Module

References

Leave a comment

Your email address will not be published. Required fields are marked *