Moonlight Sensor Light Bluetooth Speaker

Product Overview

The Moonlight Sensor Light Bluetooth Speaker combines ambient lighting with wireless audio playback. It features hand-wave sensing for light control, a Bluetooth speaker, and wireless charging capabilities.

Key Features:

• Hand-wave sensing for light control (On/Off/Switch Light)
• Bluetooth connectivity for music playback
• Wireless charging for compatible phones
• Alarm clock functionality
• Type-C charging port
• Battery level indicator
• Charging indicator light

Product Components

The device includes the following components:

• Hand Wave Sensing Area
• Sensor
• Phone Charging Area
• Alarm Notification Light
• Bluetooth indicator light
• Type-C Charging Port
• Battery Level Indicator (blinking indicates low battery, steady indicates full charge)
• Clock/Alarm Clock Indicator
• Charging Indicator Light (blinking indicates charging in progress)
• Wireless charging

Function Key Description

Power Button:

1. Long press to turn on the device. The Bluetooth icon will flash. Connect to the BT name "MOON SPEAKER". The BT icon will stay solid upon successful connection.
2. Long press again to turn off the device.
3. Note: If Bluetooth is not connected, the BT icon will turn off after 5 minutes. Double-click the main button to turn on BT again.
4. After connecting to a Bluetooth device, double-click the main button to disconnect, and double-click again to reconnect.
5. After turning on the device:
   1. 1st touch: 30% brightness
   2. 2nd touch: 70% brightness
   3. 3rd touch: 100% brightness
   4. 4th touch: breathing light mode
   5. 5th touch: turn off light. Alternatively, wave hands behind the light to turn off.

Clock Button:

1. Long press the clock button for 1-2 seconds to enter clock setting mode.
2. When the screen numbers are blinking, press the clock button once to switch between setting the hour and minute.
3. Use the '+' or '-' button to adjust the time.
4. After setting the time, wait 5 seconds or long press the clock button again to confirm.

Alarm Button:

1. Long press for 1-2 seconds to enter alarm setting mode.
2. When the screen numbers are blinking, press the alarm button once to switch between setting the hour and minute.
3. Use the '+' or '-' button to adjust the time.
4. After setting the time, wait 5 seconds or long press the alarm button again to confirm.
5. To cancel the alarm setting, double-click the alarm button. Double-click again to re-enable the alarm setting.
6. When the alarm sounds, press any button to stop it.
7. Note: After the alarm sounds, the warm white light will automatically turn on. Wave your hand over the sensing area to turn off the alarm. If the alarm is not turned off within 5 minutes, the warm white light and alarm will turn off automatically.

+ and - Buttons:

1. Long press the '+' or '-' button to adjust the volume.
2. Short press the '+' or '-' button to switch between the previous or next track.
3. Long press both '+' and '-' buttons to switch between Chinese and English voice prompts.

Bluetooth Music Playing

After powering on, select the Bluetooth device "MOON SPEAKER" for pairing on your phone. After successful pairing, a connection prompt sound will be heard, indicating a successful BT connection. You can then play music as usual.

Wireless Charging Function

To activate the wireless charging function, connect the standard USB cable to the device and the other end to a power adapter (not included). A 9V/2A adapter is recommended for maximum 15W charging efficiency. Place your phone upright on the holder.

Note: This wireless charging is compatible with most mainstream phones that support wireless charging. Charging efficiency may vary due to differences in phone size and coil positions.

Troubleshooting

Failed pairing after multiple attempts:

Turn off both the speaker and the phone, then restart them. Ensure the connection name is "MOON SPEAKER".

Music playback with intermittent interruptions:

1. Check if the connection distance is beyond range or if there are obstacles between the speaker and phone.
2. Check if the phone network is stable and if the speaker has sufficient battery.

No sound during playback:

Check if the speaker volume is set to minimum. Press and hold the plus or minus button to adjust the volume.

Cannot power on:

Check if the speaker has power. Plug in the USB charging cable, charge for 2 hours, and try again.

Product Reset

When the device is turned on, press and hold the power button for 8 seconds to restore factory settings.

Product Charging Instruction

1. Please use the standard USB cable connected to a power adapter for charging.
2. When the battery is low or insufficient, please charge it as soon as possible.
3. Do not use this device in high temperature or high-pressure environments.
4. It is recommended to charge the device once a month if it is not used for a long time to ensure the battery is fully charged and the device is working properly when needed.

Product Parameters

Accessories Included

• Bluetooth Speakers x 1
• Data Cable x 1
• User Manual x 1

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Quick Reference

Clock/Alarm Settings:

• ✔️ Alarm Clock
• Increase Time/Volume
• Next Song
• Decrease Time/Volume
• Previous Song

Buttons:

• +