Signalinks R109D CPE 4G Wireless Router

Overview

This document serves as a quick installation guide for the Signalinks R109D CPE TD-LTE Wireless Data Terminal. It outlines the essential steps and information required to set up and configure the device for internet connectivity.

Key Features & Components

• Interfaces: Includes USB DC power input, Reset button, W/LAN port, LAN port, and a standard SIM card slot.
• LED Indicators: Provides status updates for Power, System, Wi-Fi, and 4G network connectivity.
• Working Modes: Supports Cable broadband mode, Wireless broadband mode, and Automatic mode for flexible network connection.
• Item List: The package typically includes the 4G Wireless Router, Quick Installation Guide, Power Adapter, and Warranty Card.

Getting Started

• Installation: Insert a 4G SIM card into the device's SIM card slot.
• Power On: Connect the router to a 12V/1A power adapter. The device will start up, and indicators will show its status.
• Router Configuration: Access the router's web interface by entering its IP address (found on the device label) in a web browser. Log in with default credentials (username: admin, password: admin) to configure network settings, Wi-Fi, and 3G/4G parameters.

Important Notes

Ensure the device is used in a suitable environment (away from heat, well-ventilated, dry, and dust-free). Always use the original factory standard power adapter.