Inventor FS40WLR Floor Fan User Manual

User Manual for Inventor models including: FS40WLR, FS40WLR Floor Fan, FS40WLR, Floor Fan

Αρχεία και Υποστήριξη - Inventor

File Info : application/pdf, 24 Pages, 1.47MB

FS40WLR UM 022025

FLOOR FAN
· USER'S MANUAL ·
MODEL: FS40WLR
ENGLISH |

LANGUAGES
ENGLISH .................................................................................................................4 .............................................................................................................13

CAUTION
For safe operation please read and follow the below Instructions carefully.

WARNING

1. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

2. To avoid the risk of electrical shock, do not immerse the unit, cord or plug in water or any other liquids.

3. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

4. When the appliance is not operating, and, prior to cleaning, please unplug from the power socket.

5. When assembling the fan, make sure that the protective fan grill covers are properly installed.

6. After the fan assembly, do not remove the rotor blade guard.

7. Do not disassemble the rotor blade guard to clean the rotor blades.

8. Use a slightly damp cloth to clean the fan enclosure and rotor blade.

9. Do not allow any water or other liquid to enter the motor housing.

10.

Do not dispose this product as unsorted municipal waste. This appliance requires

special treatment for disposal. It is prohibited to dispose of this appliance in domestic

household waste. To prevent possible harm to the environment or human health from

uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material

resources.

To return your used device, contact the retailer, it is possible they may dispose of it at a

recycling facility.

RULES FOR SAFE OPERATION
1. While the fan is operating, no sharp objects, such as pencils, should be inserted through the protective grill. Be extra cautious when handling and be certain no fingers penetrate beyond the protective grill area, this should be strictly avoided at all times.
2. Be certain that the fan is disconnected when repositioning from one location to another. 3. Be certain that the fan is on a stable surface while operating, to avoid accidental tipping. 4.Be extra cautious when operating near a window as rain may cause electric shock. 5. This device is intended for domestic use only.

INSTALLATION INSTRUCTIONS Name of components

2 Motor shaft

1 Motor

Install by aligning

Tighten knob 7

3 Rear grill

4 Pole

Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between the real object and the illustration in the drawing shall be subject to the real subject.

5 Base 6 Nut

ASSEMBLY OF CHASSIS & COLUMN UNIT
· Unscrew the Bolt from the Extension Pole. · Insert the extension pole into the chassis and tighten the Bolt. · From the extension pole loosen the height adjustment ring and adjust the internal pole to the
desired height. (Note: If you can't find the internal pole, check if it is housed inside the extension pole. You can pull it out from the extension pole.) · To attach the motor housing section to the internal pole, loosen the thumb screw on the bottom
of the motor housing section. Place the motor housing section on the internal pole and tighten the thumb screw in alignment with the groove on the internal pole. CAUTION: Height adjustment ring must be fully fastened before the assembly of the motor housing section to the internal pole.

INSTALLATION INSTRUCTIONS

Base Installation

Align the column with the groove on the base and fix them together using butterfly screws.
Considerate Hint: Remove parts from the component before performing installation.

Front and Rear Guard Installation

Guard Catch

Align Catch of the Front Guard Press guards sequentially with the illustrated position of with both hands. the Rear Guard.

Self-Catch Installation.

OPERATION INSTRUCTIONS

Front grill

Lock nut of blade Lock nut of blade anticlockwise, and then install the front fan cover.
Blade Pull the blade to rotate after installing, so as to ensure that the blade can be normally rotated.
Lock nut of grill
Screw the lock nut of grill clockwise, and in the meantime, fix the rear grill.

OPERATION INSTRUCTIONS

I. Remote Controller (Fig.10)

1. " " On/Off

Pressing the " " key will turn on. The fan will start at

normal mode. Press the " " key again to turn off the fan.
3

2. " " Fan Speed

While the fan is operating, by pressing the " " key will

change the fan speed.

Available fan speed settings: 0 up to 12.

3. " " Timer While the fan is operating, by pressing the " " key, you can set up the timer to turn off the fan. While the fan is turned off, by pressing the " " key, you can set up the timer to turn on the fan. You can select from 0.5 to 12 hours by pressing the " " key again. The respective timer indication(s) on the display will light up. You can add the light timer indications to read the selected/remaining time until the unit turns on/off. To deactivate the Timer function and restore the continuous operation of the fan, press the " " key repeatedly until all timer indications are not light.
4. " " Swing While the fan is operating, pressing the " " key will start the horizontal swing of the fan. Press the " " key again to turn off the horizontal swing function.

NO.

Description

"MODE" button

"ON/OFF" button

"TImer" button

"SWING" button

"FAN SPEED" buttons

5. " " Mode While the fan is operating, by pressing the " " key, you select between the different modes of operation (Normal-Natural-Sleep). The selected mode indication on the display will light up.

" " Natural Under Natural mode, the fan will continuously increase and decrease the fan speed to provide a more natural wind feeling.

" " Sleep Under Sleep mode, the fan will provide air for more comfortable sleep, while working more silently.

OPERATION INSTRUCTIONS
" " Silent While the fan is operating, by selecting the " ", the fan will enter the Silent function. While the unit operates under Silent function only the Silent indicator will be light on the display, and the keys Fan Speed and Mode will not be operational (the rest of the keys will still be operational). To turn off the Silent function and return to the previous operation settings of the fan, select any other function.
While the fan is operating, by turn the rotary knob, you can choose between the functions that are available.
OOpepreartaintginigndinicdaitcioantisons

NO. Deicsocnription 1 "Timer" icon

2 "Sipceoend/Timer display"

3 "Timer" icon icon

4 "Silent" icon

icon

5 "Natural" icon

INSTRUCTIONS FOR USE

Control Panel
Mode

Height Adjustment
Turn counterclockwise and loosen for performing height adjustment.
Height Adjustment

OPERATION INSTRUCTIONS
Batteries (not included in the packing) Slide the battery compartment cover. Insert the batteries, and make sure that the batteries are placed
as shown. Slide back the battery cover. NOTES: Use manganese or alkaline batteries of type "AAA". Do not
use rechargeable batteries.

AAA Battery, 1.5v

WARNING! Do not dispose of batteries in fire, batteries may explode or leak. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-
cadmium) batteries. Always safely dispose of used batteries.

Remote Control Operation To operate the fan with the remote controller, always point the remote controller at the display of the fan, then press the keys. The remote controller will work at distances of up to roughly five meters and a maximum angle of ±15º.
II. Control Panel The keys of the control panel of the fan have the same operation as described in the Remote Controller section.
III. Tilt Adjustment To adjust the tilt of the air flow upwards or downwards, push the motor housing lightly to the desireddirection.
IV. Height Adjustment To adjust the height of the fan, loosen the height adjustment ring, carefully raise or lower the top section of the fan and firmly retighten the height adjustment ring.
V. Overheat Protection To protect from damage due to overheating for any unexpected reason, the fan is equipped with a thermal fuse that burns out and turns off the fan.

MAINTENANCE INSTRUCTION
This fan requires limited maintenance. Do not attempt to fix on your own. Always refer to qualified personnel if any service is required.
1. Prior to cleaning and assembling, the fan must be unplugged. 2. To ensure adequate air circulation to the fan's motor, vents at the rear of the fan motor should
be free of dust at all times. Do not disassemble the fan in order to remove the dust. 3. The exterior parts of the device may be wiped with a soft and damp (with a mild detergent)
cloth. 4. The use of any abrasive detergent or solvents, gasoline, or paint thinner for cleaning purposes
should be avoided as this may result in damaging the surface of the fan. 5. Water or any other liquids in the motor housing or interior parts of the fan must be avoided at
all times.

CLEANING

1. Prior to performing any cleaning the device must be unplugged.
2. All plastic parts of the device should be cleaned with a soft moist cloth and with mild soap. Thoroughly clean any soap excess with a dry cloth.

Description Maximum fan flow rate Fan power input Service value Standby power consumption Off power consumption Fan sound power level Maximum air velocity Seasonal electricity consumption Measurement standard for service value Contact details for obtaining more information

Symbol F

Value 73,68

Unit m3/min

26,50

2,78

(m3/min)/W

PSB

0,34

POFF

LWA

60,27

dB(A)

3,25

meters/sec

8,86

kWh/a

EN IEC 60879:2019
Inventor A.G. A.E 24th National Road Athens Lamia & 1 Thoukididou Str., Ag.Stefanos, 14565 Tel.: +30 211 300 3300, Fax: +30 211 300 3333 - 3333 MADE in P.R.C.

All the pictures in the manual are for explanatory purposes only. The actual shape of the unit you purchased may be slightly different, but the operations and functions are the same. The company may not be held responsible for any misprinted information. The design and the specifications of the product for reasons, such as product improvement, are subject to change without any prior notice. Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for further details. Any future updates to the manual will be uploaded to the service website, and it is advised to always check for the latest version.
11

, .

1. , , .
2. , .
3. 8 () , . . .
4. , .
5. , .
6. , .
7. . 8.
. 9. . 10.
. . , . , , .

1. . .
2. .
3. & , .
4. , .
5. .
12 GR

1
7
: . , .

Install b-y aligning .

5 6

· . · . . · .
. (: .) · . , . : .

GR 13

Alignthecolumnwiththegrooveontheb. ase and fixthemtogether usingbutterflyscrews. ConsiderateHint: . Removepa:rtsfromthe componentbefore performinginstallation. .

FrontandRearGuard Installation

AlignCatchoftheFrontGuard withtheillustratedpositionof theRear. Guard.

Press guardssequentially withbothhands.

Guard Catch Self-CatchInstallat,ion.
.

14 GR

Frontgrill

· Locknut ofblade Locknut ofbl,ade anticlockwise, andtheninstall the . front fan cover.
Blade · Pullthebladetorotateafter installing, soasto ensurethat,thebladecanbe normallyro.tated.
Locknut ofgrill · Screwthelocknut ofgrillclockwise, andinthemeantim,e, fixtherear grill. .

GR 15

I. (.10)

1. " " On-Off

" " .

" "

2. " "

" " .

: 0 12.

3. " "

" "

. 0.5 12 " " ( 0.5 ). . / /.
,

NO.

NO. 1
1

Description "MODE"button

2 2 "ON/OFOFn" /bOufttfon

"TImer" button

"SWING"button

5 5

"FANSPEED" buttons

" "

4. " " , " " . , " ".

5. " " , " " (, , ). .

" " , . " " , .

16 GR

" " , " " . , , ( ). , .
, , .
Operatingindications

NO. icon
1 ''''

2 /

3 icon

4 ''icon''

5 ''icon''

Control Panel
Mode

HeightAdjustment
Turncounterclockwiseand loosenforperformingheight adjustment. .
Height Adjustment
GR 17

( )
. . .

1.5V AAA

: "AAA". .

! , . . , (-) (-) . .

, . 5 ±15º.

II. Control Panel control panel .

III. , .

IV. , , .

V. ,

18 GR

. . .

1. .
2. , . .
3. , .
4. , . .
5. .

1. , .
2. , . .

F P
S_v
P_sb

73.68 26.5 2.78
0.34

m³/min
W (m³/min)/W
W

P_OFF L_WA

60.27

W dB(A)

3.25

8.86

kWh/

EN IEC 60879:2019
Inventor A.G. A.E. 24 . .. - & 1 , . , 14565 .: +30 211 300 3300, Fax: +30 211 300 3333 - 3333 MADE in P.R.C."

GR 19

. , . . . , 211 300 3300 . , .

20 GR

. www.inventoraircondition.gr/media-library

llinklink

l ,

link :

link

https://www.inventoraircondition.gr/egiisi-inventor

QR:

l 2 .. ,

l"": " "

,, ,

..
*

.. 3

, :

email*

.. newsletterInventor * A .

þ
email

þ il

þ il 4

þmaililemail..

Inventor!

GR 21

NOTES

FLOOR FAN
1.0.022025
Manufacturer: INVENTOR A.G. S.A.
24th km National Road Athens - Lamia & 2 Thoukididou Str., Ag.Stefanos, 14565 Tel.: +30 211 300 3300, Fax: +30 211 300 3333 - www.inventor.ac

References

Adobe PDF Library 17.0 Adobe InDesign 20.1 (Macintosh)