NIXON Heat A1320 デジタルウォッチ ユーザーマニュアル

導入

This manual provides detailed instructions for the NIXON Heat A1320 Digital Watch. Please read this manual thoroughly to understand the watch's functions, setup, and maintenance procedures. Proper use and care will ensure the longevity and optimal performance of your NIXON Heat watch.

製品終了view

主な特徴

• Ultra-Thin, High-Performance Design: Features an 8mm stainless steel case and a custom LCD display.
• Advanced Timing Functions: Includes chronograph, pre-set and custom timers, and a unique "Final Countdown" timer with a 60-second "SEND" notification.
• Durable & Sport-Ready: Constructed with a 38mm stainless steel case, hardened mineral crystal, and stainless steel pushers.
• Breathable & Secure Fit: Equipped with a 20mm perforated rubber strap for airflow and a double-locking looper system.
• 100M Water Resistance & Night Visibility: Suitable for water activities up to 100 meters (10 ATM) and features an EL backlight.

コンポーネント

• 時計ケース: Houses the digital module and display.
• LCDディスプレイ: Shows time, date, and various mode information.
• モードボタン: Cycles through different watch modes.
• ALTボタン: Used for setting adjustments and activating the backlight.
• ラバーストラップ: Perforated for comfort and breathability.
• Double-Locking Looper: Secures the strap during activity.
• バックル： For fastening the watch.

フロント view of the NIXON Heat A1320 Digital Watch, displaying the time and date.

側 view of the NIXON Heat A1320 Digital Watch, highlighting its thin profile and the 'NIXON' branding on the case.

後方 view of the NIXON Heat A1320 Digital Watch, showing the engraved case back with 'NIXON BREATHE DEEP THE HEAT' and other details.

Close-up of the NIXON Heat A1320 display, showing the 'SEND!' notification during a timer countdown.

The NIXON Heat A1320 Digital Watch worn on a person's wrist, demonstrating its fit during an active lifestyle.

設定

初期時刻と日付の設定

1. 時刻設定モードに入る: Press and hold the 'MODE' button until the time display begins to flash.
2. 時間を調整: Use the 'ALT' button to increase the flashing value (hours, minutes). Press 'MODE' to cycle to the next setting (e.g., from hours to minutes).
3. 12/24 時間形式を設定します: While in time setting mode, you can toggle between 12-hour and 24-hour formats using the 'ALT' button when the hour is flashing.
4. 設定日: After setting the time, continue pressing 'MODE' to cycle through date settings (month, day, year). Use 'ALT' to adjust each value.
5. 設定モードを終了: Press 'MODE' until the display stops flashing, or wait a few seconds for it to automatically exit.

操作手順

ボタンの機能

• モードボタン: Cycles through Time, Chronograph, and Timer modes. Used to confirm settings.
• ALTボタン: Adjusts values in setting modes. Activates backlight when pressed simultaneously with the MODE button.

時間モード

The default display shows the current time, day of the week, and date. You can switch between numeral date display (e.g., 03.27) and weekday date display (e.g., FR 27) by briefly pressing the 'ALT' button in Time Mode.

Chronograph Mode (Stopwatch)

1. クロノグラフモードに入る: Press the 'MODE' button until 'CHRONO' appears on the display.
2. 開始/停止: Press the 'ALT' button to start the stopwatch. Press 'ALT' again to pause.
3. リセット： While paused, press and hold the 'ALT' button to reset the stopwatch to zero.

タイマーモード

The NIXON Heat offers pre-set timers and a custom timer option.

1. タイマーモードに入る: Press the 'MODE' button until 'TIMER' appears on the display.
2. Select Pre-set Timer: Briefly press the 'ALT' button to cycle through pre-set timer options (e.g., 60:00, 30:00, 15:00, 10:00, 7:00).
3. Set Custom Timer: Continue cycling with 'ALT' until 'CSTM' (Custom) appears. Press and hold 'MODE' to enter custom timer setting. Use 'ALT' to adjust hours and minutes, and 'MODE' to switch between them. Press 'MODE' again to save and exit custom setting.
4. タイマーの開始/停止: Once a timer is selected or set, press 'ALT' to start the countdown. Press 'ALT' again to pause.
5. "SEND!" Notification: During the final 60 seconds of any timer, the watch will display "SEND!" and the border will blink red, indicating the final push.

バックライト

To activate the EL backlight for improved visibility in low-light conditions, press both the 'MODE' and 'ALT' buttons simultaneously. The backlight will illuminate for a few seconds.

メンテナンス

クリーニング

定期的に時計を柔らかくて清潔な布で拭いてください。amp cloth. For the rubber strap, mild soap and water can be used. Avoid harsh chemicals or abrasive materials that could damage the watch's finish or strap.

耐水性

The NIXON Heat A1320 is water-resistant up to 100 meters (10 ATM). This makes it suitable for showering, swimming, and snorkeling. However, it is not recommended for scuba diving. Always ensure the buttons are not pressed while the watch is submerged in water to prevent water ingress.

バッテリー交換

When the display dims or functions become erratic, it may be time to replace the battery. NIXON recommends having battery replacements performed by an authorized service center to maintain water resistance and ensure proper sealing.

トラブルシューティング

ディスプレイが空白または暗い

• Check battery: The battery may be low or depleted. Replace the battery at an authorized service center.
• Activate backlight: Press both 'MODE' and 'ALT' buttons simultaneously to see if the backlight illuminates the display.

Buttons are unresponsive or difficult to press

• Ensure firm press: The buttons may require a firm and deliberate press for activation.
• Clean buttons: Debris or dirt around the buttons can affect their functionality. Gently clean the area around the buttons.
• Service: If issues persist, contact NIXON customer support or an authorized service center.

Time or date is incorrect

• Re-set time/date: Follow the 'Initial Time and Date Setting' instructions in the Setup section to correct the time and date.

仕様

保証とサポート

メーカー保証

The NIXON Heat A1320 Digital Watch is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your purchase or visit the official NIXON webサイト。

カスタマーサポート

For further assistance, technical support, or service inquiries, please contact NIXON customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your watch model number (A1320) and purchase details readily available.