1.製品オーバーview
The DATOUBOSS 12V 100Ah LiFePO4 Battery is a high-performance lithium iron phosphate battery designed for deep cycle applications. It features a built-in 100A Battery Management System (BMS) for enhanced safety and longevity, making it suitable for various uses including RVs, camping, solar energy systems, off-grid power, and marine applications.
Figure 1: DATOUBOSS 12V 100Ah LiFePO4 Battery.
主な特徴:
- Superior Performance and Safety: Utilizes solid-state electrolyte technology and UL2054 safety certification. Features a built-in 100A BMS with multiple protections including short-circuit, over-voltage, over-heating, and over-charging protection.
- 寿命の延長: Offers a service life of up to 10 years and 4,000-15,000 deep cycles, significantly outperforming lead-acid batteries.
- 柔軟な容量拡張: Supports series and parallel connections for increased capacity and voltage, allowing configurations up to 4P4S (16 batteries) for power outputs from 1.28 kW to 20.48 kW.
- 広い動作温度範囲: Designed to adapt to extreme temperatures, ensuring reliable discharge performance from -4°F to 140°F.
- 軽量でコンパクト: Smaller and lighter than traditional lead-acid batteries, facilitating easier installation and portability.
2. 安全情報
Adhering to these safety guidelines is crucial for preventing damage to the battery and ensuring user safety. Improper handling can lead to serious injury or equipment malfunction.
Figure 2: Important safety warnings for battery handling.
一般的な安全ガイドライン:
- Do NOT reverse polarity: Ensure positive and negative terminals are connected correctly.
- 物理的な衝撃を避ける: Do not hit, drop, or throw objects at the battery, or step on it.
- ショートを防ぐ: 金属物を使用してプラス端子とマイナス端子を直接接続しないでください。
- No welding or piercing: Do not weld the battery directly or pierce it with nails or other sharp objects.
- 乾いた状態に保つ： バッテリーを海水やその他の液体に浸さないでください。
- Not for engine starting: This battery is not designed for use as a car starter battery, trip starter battery, or engine starter battery.
- 温度制限： Do not use the battery at high temperatures. Exceeding temperature limits may cause overheating, fire, or permanent damage, shortening its service life.
3. セットアップ
初期検査:
Upon receiving your DATOUBOSS LiFePO4 battery, carefully inspect the packaging and the battery for any signs of damage. Ensure all terminals are secure and free from debris. If any damage is found, contact customer support immediately.
Battery Connection (Series and Parallel):
The DATOUBOSS 12V 100Ah LiFePO4 battery supports both series and parallel connections to achieve desired voltage and capacity. Always ensure all batteries are of the same model and capacity when connecting in series or parallel.
- 並列接続： Connect positive terminals together and negative terminals together to increase total capacity while maintaining the same voltage.
- 直列接続: 1つのバッテリーのプラス端子を次のバッテリーのマイナス端子に接続して合計容量を増やしますtage. Ensure all batteries are at a similar state of charge before connecting in series.
- 最大構成: The battery supports up to 4 series and 4 parallel connections (4S4P) for a maximum load power of 20.48 kW.
Figure 3: Diagram illustrating flexible capacity expansion through series and parallel connections.
4. 操作手順
充電：
The DATOUBOSS LiFePO4 battery can be charged using various methods. Always use a charger compatible with LiFePO4 batteries to ensure optimal performance and safety.
- ソーラーパネル: Connect to a solar panel system with an appropriate MPPT (Maximum Power Point Tracking) charge controller.
- バッテリー充電器: 専用のLiFePO4バッテリー充電器を使用してください。
- ジェネレータ： Connect to a generator with a compatible charging output.
Figure 4: Various charging methods for the LiFePO4 battery.
退院:
The battery provides a stable discharge curve above 12.8V and can deliver 95% of its capacity. Ensure your inverter and connected devices are compatible with the battery's voltage および現在の仕様。
温度に関する考慮事項:
The battery is designed for excellent discharge performance ranging from -4°F to 140°F (-20°C to 60°C). Operating outside this range may affect performance and lifespan. The built-in BMS includes low-temperature protection.
Figure 5: The battery's ability to adapt to extreme temperatures.
5. メンテナンス
クリーニング：
- Regularly inspect the battery terminals for corrosion or loose connections.
- バッテリーを清掃するasin乾いた柔らかい布で拭いてください。溶剤や研磨剤は使用しないでください。
ストレージ：
- If storing the battery for an extended period, ensure it is charged to approximately 50-70% of its capacity.
- バッテリーは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
- Disconnect the battery from all loads during storage.
6。 トラブルシューティング
This section provides solutions for common issues you might encounter with your DATOUBOSS LiFePO4 battery.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| バッテリーが充電されない | Incorrect charger type; loose connections; BMS protection activated (over-discharge, over-voltage, low temperature) | Ensure LiFePO4 compatible charger is used; check all cable connections; allow battery to warm up if in cold conditions; consult BMS status indicators if available. |
| 低出力 | Battery not fully charged; excessive load; loose connections | Fully charge the battery; reduce the load on the battery; check and tighten all connections. |
| バッテリーの過熱 | Operating in high ambient temperatures; excessive charge/discharge current | Move battery to a cooler environment; ensure charge/discharge currents are within specified limits. The BMS will activate over-temperature protection. |
7. 製品仕様
| 仕様 | 価値 |
|---|---|
| ブランド | ダトウボス |
| モデル | DT-12V100AH |
| 商品型番 | 12V 100AhLiFePO4リチウム電池 |
| 巻tage | 12.8 ボルト (DC) |
| 容量 | 100Ah |
| アイテム重量 | 24ポンド（約10.9kg） |
| パッケージ寸法 | 10.2 x 8.5 x 6.6インチ |
| ＢＭＳ | Built-in 100A BMS with low-temp protection |
| サイクル寿命 | 4000〜15000サイクル |
| 耐用年数 | 最長10年 |
| 欧州連合 | 740684063402 |
8. 保証とサポート
保証情報:
DATOUBOSS 12V 100Ah LiFePO4バッテリーには、 5年間保証通常使用における材料および製造上の欠陥を保証いたします。保証請求の際は、購入証明書を保管してください。
カスタマーサポート:
For any questions, technical assistance, or warranty claims, please contact DATOUBOSS customer service. We provide 24-hour online service to ensure timely and efficient support.
Even if Amazon indicates an item is not returnable, please reach out to us directly for assistance with product defects, damage, or usage concerns. We offer free return and replacement services to ensure your satisfaction.