DATOUBOSS 12v100Ah (Part Number: DST456)

DATOUBOSS 12V 100Ah LiFePO4 バッテリー ユーザーマニュアル

Model: 12v100Ah (Part Number: DST456)

1.製品オーバーview

The DATOUBOSS 12V 100Ah LiFePO4 battery is a deep-cycle lithium iron phosphate battery designed for reliable energy storage. It is suitable for solar power systems, recreational vehicles (RVs), off-grid installations, and auxiliary power needs. This battery offers a long cycle life and stable power output, making it an efficient and durable alternative to traditional lead-acid batteries.

主な機能は次のとおりです。

  • 高エネルギー密度: Provides more usable energy in a lighter, more compact form factor compared to lead-acid batteries.
  • サイクル寿命の延長: Boasts a cycle life of 4,000 to 15,000 cycles, significantly outperforming lead-acid batteries.
  • 統合BMS保護: Features a smart Battery Management System (BMS) that protects against overcharge, over-discharge, overcurrent, short circuits, and temperature fluctuations.
  • スケーラブルなシステム: Supports configurations up to 4P4S (4 parallel, 4 series) for increased capacity or voltag要件。
  • 耐久性のある構造: Built with automotive-grade LiFePO4 cells and a sealed housing rated IP65 for protection during normal use.

注記: This battery is designed for deep-cycle energy storage applications and is ない intended for engine starting or cranking applications.

DATOUBOSS 12V 100Ah LiFePO4バッテリーの寸法と主な特徴

Image 1.1: DATOUBOSS 12V 100Ah LiFePO4 Battery with dimensions (21.5cm/8.46in H, 33cm/13in L, 17cm/6.69in W) and specifications like 1280Wh usable energy, 100A max continuous discharging current, 1280W max load power, and IP65 waterproof rating.

DATOUBOSS LiFePO4 Battery features including compact size, Grade A cell, superior BMS, 4000+ deep cycle, low temp protection, and IP65 waterproof

Image 1.2: Visual representation of the battery's features: compact size, Grade A cells, superior BMS, 4000+ deep cycles, low temperature protection, and IP65 waterproof rating.

2. 安全に関する注意事項

Please read and understand all safety instructions before installing or operating the DATOUBOSS LiFePO4 battery. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.

  • プラス端子とマイナス端子をショートさせないでください。
  • 許可なくバッテリーを改造したり分解したりしないでください。
  • バッテリーを火や水の中に投げ込まないでください。
  • 出力容量に一致する標準充電器のみを使用してくださいtagリチウム電池のe。
  • 充電中および操作中は適切な換気を確保してください。
  • バッテリーを子供やペットの手の届かない場所に保管してください。
  • Wear appropriate personal protective equipment (PPE) when handling the battery.
  • バッテリーを極端な温度や直射日光にさらさないでください。

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

  • 1x DATOUBOSS 12.8V 100Ah Deep-Cycle Lithium Iron Phosphate Battery (Core Series)
  • ユーザーマニュアル x 1
  • 断熱スリーブ2個
  • 2x M8 Long Terminal Bolts
Diagram showing the package contents of the DATOUBOSS 12V 100Ah LiFePO4 Battery

Image 3.1: Illustration of the battery and included accessories: user manual, insulating sleeves, and M8 terminal bolts.

4. セットアップとインストール

4.1 初期充電

Before first use, it is recommended to fully charge the battery using a compatible LiFePO4 battery charger. Ensure the charger's voltage matches the battery's specifications.

4.2つの接続方法

The DATOUBOSS 12V 100Ah LiFePO4 battery supports flexible configurations up to 4P4S (4 batteries in parallel, 4 batteries in series) to meet various capacity and voltage requirements. Always ensure proper polarity when connecting batteries.

Diagram showing a DATOUBOSS LiFePO4 battery connected in an RV solar power system with solar panel, MPPT, and inverter

図4.1: 例ample setup of the battery in an RV solar system, illustrating connections between the solar panel, MPPT charge controller, battery, and inverter to power loads.

Diagram illustrating a 4P4S battery connection for a home energy storage system

Image 4.2: A 4P4S connection diagram showing how multiple batteries can be linked to achieve a maximum energy storage capacity of 20.48kWh and 20.48kW continuous output power for a home system.

4.3充電方法

The battery can be charged using several methods:

  • Lithium Battery Charger: 適切な容量の専用LiFePO4充電器を使用してくださいtage と現在の設定。
  • ソーラーパネル: Connect to a solar panel system via an MPPT (Maximum Power Point Tracking) charge controller.
  • ジェネレータ: Utilize a generator with a compatible charging output.
Diagram showing three ways to charge the DATOUBOSS LiFePO4 battery: lithium battery charger, solar panel, and generator

Image 4.3: Visual guide to the three primary charging methods for the battery: a dedicated lithium battery charger, solar panels, and a generator.

5. 操作手順

Once properly installed and charged, the DATOUBOSS LiFePO4 battery can power various devices and systems. Ensure that the total power consumption of connected devices does not exceed the battery's maximum load capacity (1280W) or the inverter's capacity if used.

5.1 デバイスへの電源供給

Connect your devices to an appropriate inverter or directly to the battery terminals if the device is 12V compatible. The battery's BMS will manage power output and protect against overloads.

RV環境のさまざまな機器に電力を供給するDATOUBOSS LiFePO4バッテリー

Image 5.1: The battery providing power for common RV appliances such as an air conditioner (1000W for 1.3H), coffee maker (800W for 1.6H), refrigerator (150W for 8.5H), and fan (100W for 12.8H).

5.2 Video Demonstration: Battery and Inverter Usage

Video 5.2: This video demonstrates the DATOUBOSS 12V 100Ah LiFePO4 battery connected to an inverter, powering various household appliances like a kettle, fan, and charging a mobile phone. It highlights the battery's capability to provide stable AC power for daily use.

6. メンテナンス

Proper maintenance ensures the longevity and optimal performance of your DATOUBOSS LiFePO4 battery.

  • 定期点検: バッテリー端子に腐食や接続の緩みがないか定期的に点検してください。必要に応じて清掃してください。
  • ストレージ: If storing the battery for an extended period, ensure it is charged to approximately 50-70% capacity and stored in a cool, dry place away from direct sunlight.
  • 充電: Always use a charger specifically designed for LiFePO4 batteries. Avoid overcharging or deep discharging the battery.
  • 温度: Operate the battery within its specified temperature range (Charge Temp: 0°C to 45°C; Discharge Temp: -20°C to 65°C).

7。 トラブルシューティング

DATOUBOSS LiFePO4 バッテリーで問題が発生した場合は、次の一般的な問題と解決策を参照してください。

問題考えられる原因解決
バッテリーが充電されないIncorrect charger, loose connections, BMS protection activatedVerify charger compatibility, check all connections, allow battery to reset if BMS tripped.
電力出力なしBattery discharged, loose connections, BMS protection activated, inverter faultCharge battery, check connections, reset BMS (if applicable), inspect inverter.
容量/実行時間の短縮Aging battery, extreme temperatures, excessive loadEnsure proper operating temperature, reduce load, consider battery replacement if significantly aged.
Overheating during operation/chargingPoor ventilation, excessive load, internal faultEnsure adequate airflow, reduce load, discontinue use and contact support if overheating persists.

これらの解決策を試しても問題が解決しない場合は、DATOUBOSS カスタマー サポートにお問い合わせください。

8. 仕様

仕様価値
ブランドダトウボス
モデル番号DS456 型番
サイズ(公称)12v100Ah
巻tage12.8ボルト
公称容量100Ah
使用可能なエネルギー1280Wh
最大。 連続放電電流100A
最大。 負荷電力1280W
アイテム重量11キログラム
充電温度0℃~45℃
排出温度-20°C ~ 65°C
防水等級IP65
サイクル寿命4000〜15000サイクル

9. 保証とサポート

DATOUBOSS 12V 100Ah LiFePO4バッテリーには、 5年間のメーカー保証. For warranty claims, technical support, or any inquiries, please refer to the official DATOUBOSS store or contact their customer service directly.

Official DATOUBOSS Store: ストアを訪問

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.