RPNB Deluxe Fireproof Safe Box

2. 安全情報

• 重い物: The safe is heavy (approximately 95.15 lbs). Exercise caution when moving to prevent injury. It is recommended to have multiple people assist with lifting.
• 転倒の危険: To prevent tipping, especially on uneven surfaces or if the door is open, secure the safe using the provided mounting hardware.
• バックアップキー: Always store backup keys in a secure location away from the safe. バックアップキーを金庫の中に残さないでください。
• バッテリー： Ensure correct battery polarity when installing. Replace batteries promptly when low to avoid being locked out.
• 子供たち： Keep children away from the safe and its contents. Do not allow children to play with the safe or its locking mechanisms.
• 振動アラーム： The safe features a built-in vibration alarm. If the safe is shaken violently, an alarm will sound, and the keypad will be temporarily disabled.

3. セットアップ

3.1 開梱と初期検査

1. 金庫を梱包から慎重に取り出します。
2. 金庫に損傷がないか点検してください。損傷がある場合は、直ちにカスタマーサポートにご連絡ください。
3. Locate the accessory box inside the safe, which contains the 3-spoke handle, manual keys, and mounting bolts.

3.2 ハンドルの取り付け

The 3-spoke handle is packed separately to prevent damage during transit.

1. Align the handle with the spindle on the safe door.
2. Push the handle firmly onto the spindle until it clicks into place.
3. Ensure the handle is securely attached and can turn freely.

3.3 バッテリーの取り付け

The digital keypad requires a 9V battery (not included).

1. Locate the external battery compartment on the keypad unit.
2. バッテリーカバーをスライドさせて開きます。
3. 正しい極性 (+/-) を確認して、新しい 9V アルカリ電池を挿入します。
4. 電池カバーをしっかりと閉じてください。

図2: Location of the external battery compartment on the digital keypad.

3.4 Initial Opening with Backup Keys

For the first use, or if batteries are depleted, use the backup keys.

1. Locate the hidden emergency keyhole, usually behind the keypad cover or a removable panel.
2. バックアップキーの 1 つをキーホールに挿入し、時計回りに回します。
3. While holding the key turned, rotate the 3-spoke handle clockwise to open the safe door.
4. Remove the key and store it in a safe, separate location.

3.5 金庫の取り付け

To enhance security and prevent tipping, it is recommended to mount the safe to the floor.

1. Choose a suitable location, ensuring the safe is level.
2. Open the safe door and locate the mounting holes on the bottom of the safe.
3. Mark the drilling points on the floor through the mounting holes.
4. Drill pilot holes into the floor using an appropriate drill bit for your floor type (concrete or wood).
5. Position the safe over the drilled holes.
6. Insert the provided mounting bolts through the safe's bottom holes and into the floor.
7. ボルトをしっかりと締めてください。

図3: Example of a securely installed RPNB safe within a cabinet.

4. 操作手順

4.1 Programming the Master Passcode

The safe comes with a default code. It is crucial to change this immediately.

1. With the safe door open, locate the red reset button on the inside of the door.
2. Press the red reset button. The keypad will beep, and the indicator light will flash.
3. Enter your desired 4-8 digit passcode on the touchscreen keypad.
4. Press the "E" button to confirm. The keypad will beep again, indicating successful programming.
5. ドアを閉める前に、ドアを開いた状態で新しいパスコードをテストしてください。

4.2 Opening the Safe with Digital Passcode

1. Enter your programmed 4-8 digit passcode on the touchscreen keypad.
2. Press the "E" button. The indicator light will turn green.
3. Within 5 seconds, rotate the 3-spoke handle clockwise to open the door.

図4: The safe can be opened using either the digital master passcode or the backup keys.

4.3 Emergency Alert System

The safe is equipped with a vibration alarm for enhanced security.

• If the safe experiences violent shaking or tampering, a 1-minute alarm will be triggered.
• During the alarm, the keypad will be temporarily disabled.
• To stop the alarm and re-enable the keypad, use a backup key to open the safe.

図5: Explanation of the Emergency Alert System and how it responds to tampエリング。

4.4 Silent Mode Setting

You can mute the keypad tones for discreet operation.

1. To activate Silent Mode: Press "0" then "E".
2. To deactivate Silent Mode: Press "0" then "E" again.

5. メンテナンス

5.1 電池の交換

Replace the 9V battery when the low battery indicator appears on the keypad or if the keypad becomes unresponsive. Refer to section 3.3 for battery installation steps.

5.2 クリーニング

金庫の外側を柔らかくて乾いた布で拭いてください。amp 布で拭いてください。仕上げや電子部品にダメージを与える可能性のある研磨剤入りの洗剤や溶剤は使用しないでください。

5.3 Internal Shelf Adjustment

The safe includes two fully adjustable metal shelves with 16 levels of height adjustment. To adjust a shelf:

1. 棚からすべてのアイテムを削除します。
2. Carefully lift the shelf and slide it out of its current position.
3. Re-insert the shelf into the desired slots on the side racks. Ensure it is level and securely seated.

図6: Adjustable metal shelves provide flexible storage options within the safe.

6。 トラブルシューティング

7. 仕様

図7: Detailed dimensions of the RPEFS66W safe.

8. 保証とサポート

8.1 保証情報

For detailed warranty information, please refer to the warranty card included with your product or visit the official RPNB webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。

8.2 カスタマーサポート

If you encounter any issues or have questions regarding your RPNB Deluxe Fireproof Safe Box, please contact RPNB customer support. Contact details can typically be found on the manufacturer's webサイトまたは製品パッケージに記載されています。

You can also visit the official RPNB store on Amazon for more information: RPNBストア