Neoteck 225° Digital Angle Finder with Laser (Model ST99GL) User Manual

導入

Thank you for choosing the Neoteck 225° Digital Angle Finder with Laser. This precision tool is designed for accurate angle measurement and alignment in various applications, including woodworking, construction, tile installation, and home renovation. This manual provides essential information for safe and effective use of your device.

Image: The Neoteck 225° Digital Angle Finder with Laser, showcasinデザインとデジタルディスプレイ。

製品の特徴

• Laser-Aim Digital Angle Finder: Features an integrated Class 2 laser (<1mW) that projects a clear line up to 3 meters for direct angle marking and alignment, reducing measurement transfer errors.
• 0-225° High-Precision Digital Protractor: Offers a professional measuring range with ±0.5° precision and 0.1° incremental adjustment. Includes a mechanical lock knob for securing angles.
• Built-in Bubble Levels: Incorporates horizontal and vertical spirit vials for quick level and plumb checks, eliminating the need for a separate tool.
• ユーザーフレンドリーなコントロール: Equipped with a HOLD button to freeze readings, a physical lock knob for arm security, and a blue backlit LCD for readability in dim conditions.
• 自動電源オフ: 5 分間操作がないと自動的に電源がオフになり、バッテリー寿命が節約されます。
• 耐久性のある構造: Made with a robust aluminum alloy frame for jobsite toughness and long-term reliability.

箱の中身

パッケージを開封したら、以下の品目がすべて揃っていることを確認してください。

• 1 x Neoteck Digital Angle Finder with Laser
• ポータブルバッグ x 1
• 1 x 9Vバッテリー
• ユーザーマニュアル (本書) x 1

Image: The Neoteck Digital Angle Finder, its portable bag, 9V battery, and user manual.

安全情報

Please read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, and/or serious injury.

レーザーの安全性

This device uses a Class 2 laser product (<1mW). Adhere to the following safety guidelines:

• 注意： レーザー光線を直接見つめないでください。
• レーザーが直接目に当たらないようにしてください。
• レーザー光線を人や動物に向けないでください。
• デバイスを分解しないでください。レーザー放射は危険です。
• デバイスを子供の手の届かない場所に保管してください。

一般的な安全性

• Ensure the battery is installed correctly according to polarity markings.
• デバイスを長期間使用しない場合は、バッテリーを取り外してください。
• デバイスを極端な温度、湿気、直射日光にさらさないでください。
• 柔らかく乾いた布でデバイスを拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。

設定

バッテリーの取り付け

1. デバイスの背面にある電池ボックスのカバーを見つけます。
2. カバーをスライドさせて開きます。
3. Insert the provided 9V battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. 電池カバーをしっかりと閉じてください。

画像: クローズアップ view of the battery compartment, showing the insertion of a 9V battery.

操作手順

電源オン/オフ

• を押す オン/オフ button to turn the device on. The LCD will illuminate.
• を押し続けます オン/オフ ボタンを数秒間押してデバイスの電源をオフにします。
• 5 分間操作がないと、デバイスは自動的に電源がオフになります。

角度の測定

1. Open the arms of the angle finder to the desired angle. The digital display will show the current angle.
2. The measurement range is 0-225°.
3. To lock the measured angle, tighten the ロックノブ located at the pivot point. This prevents accidental changes when transferring the angle.
4. を押す 所有 button to freeze the current reading on the LCD. Press it again to release.

Image: The angle finder displaying a 45° angle, illustrating its 0-225° measuring range.

Image: A close-up of the backlit LCD display showing an angle of 134.2 degrees, highlighting its readability.

Using the Laser Line

• デバイスの電源が入っている状態で、 レーザーボタン (often combined with the backlight button, indicated by a laser icon) to activate the laser line.
• The laser projects a horizontal line for direct visual marking and alignment on surfaces.
• The working distance for the laser is typically 3-5 meters.
• Use the laser for tasks such as aligning picture frames, installing tiles, or marking straight lines.
• Press the Laser Button again to turn off the laser.

Image: The digital angle finder projecting a laser line onto a wall, demonstrating its use for precise alignment.

Using the Bubble Levels

• The device includes both horizontal and vertical bubble levels.
• Place the angle finder against the surface you wish to check for level or plumb.
• Observe the bubble within the vials. When the bubble is centered between the two lines, the surface is level (horizontal vial) or plumb (vertical vial).
• These bubble levels provide quick visual checks and do not display values on the LCD.

Image: The digital angle finder being used to check horizontal alignment with its integrated bubble level.

バックライト機能

• を押す バックライトボタン (often combined with the laser button, indicated by a light bulb icon) to turn the LCD backlight on or off.
• The backlight improves readability in low-light conditions.

メンテナンス

• クリーニング： Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials. Keep the laser aperture clean for optimal performance.
• ストレージ： Store the angle finder in its portable bag in a dry, cool place, away from direct sunlight and extreme temperatures.
• バッテリー交換: When the battery indicator on the LCD shows low power, replace the 9V battery promptly to ensure accurate readings. Follow the battery installation steps in the Setup section.

トラブルシューティング

仕様

保証

This Neoteck product comes with an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

サポート

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Neoteck customer support. Refer to the product packaging or the official Neoteck web最新の連絡先情報については、サイトをご覧ください。

オンラインリソース: Visit the official Neoteck store on Amazon for product updates and additional information: ネオテックストア