Evenflo GoTime LX ブースターカーシート ユーザーマニュアル

はじめに以上view

The Evenflo GoTime LX Booster Seat is designed to provide a safe and comfortable seating solution for older children in vehicles. This booster seat accommodates children weighing 40 to 120 lbs, with a height range of 44 to 60 inches, and a minimum age of 5 years. It offers two modes of forward-facing use: a high-back booster and a backless booster, adapting to your child's growth.

Key features include a deep design with overlapping head and body sides for enhanced support, a one-hand adjustable headrest with 7 height positions, and dual-integrated cup holders for convenience. The seat is also designed for easy cleaning with a removable and machine-washable padded seat cover.

主な特徴

• 強化された安全設計: Features a deep design with overlapping head and body sides for added support, meeting or exceeding all applicable federal safety standards.
• 高さ調節可能： Easy one-hand height adjustment to 7 positions ensures a proper fit for your growing child.
• Two Modes of Use: Seamlessly transitions from a high-back booster to a backless booster for children aged 5 years and up, weighing 40 to 120 lbs.
• Proper Belt Positioning: Includes a belt clip to correctly position the vehicle's seat belt on the child's shoulder.
• 一体型カップホルダー: Dual cup holders keep drinks and snacks accessible, promoting driver focus.
• メンテナンスが簡単: Padded seat is removable and machine-washable for convenient cleaning.

箱の中身

• 1 Evenflo GoTime LX Booster Car Seat

セットアップとインストール

Before installation, ensure you read the complete instruction manual provided with your booster seat. Proper installation is crucial for your child's safety.

High-Back Booster Setup:

1. コンポーネントを組み立てる: Connect the high-back portion to the booster base. Ensure the connection is secure and audible clicks are heard if applicable.


Image: The Evenflo GoTime LX Booster Car Seat shown disassembled into its high-back and base components, ready for assembly or conversion to backless mode.

2. ヘッドレストの高さを調整します: Use the one-hand adjustment mechanism to raise or lower the headrest. The shoulder belt guide should be positioned just above your child's shoulders.


Image: A sequence of images showing the headrest of the Evenflo GoTime LX Booster Car Seat being adjusted to different height positions.

3. 車両内の位置: Place the booster seat firmly against the vehicle's seat back.
4. 子供の安全を守る: Route the vehicle's lap belt under the armrests and across your child's lap, ensuring it lies low on the hips. Route the shoulder belt through the red belt guide on the headrest, ensuring it lies flat across your child's chest and shoulder, not on the neck or face.


画像: クローズアップ view of the red seat belt guide on the Evenflo GoTime LX Booster Car Seat, demonstrating the correct path for the vehicle's shoulder belt.

Backless Booster Conversion:

1. Remove High-Back: Detach the high-back portion from the booster base according to the manual's instructions.
2. Use Belt Positioning Clip: When using the backless booster, attach the included belt positioning clip to the vehicle's shoulder belt to ensure proper fit across your child's shoulder.

操作手順

Ensure your child is properly secured in the booster seat before every journey. The vehicle's seat belt is the primary restraint system when using this booster.

• 子供の配置: Guide your child to sit fully back in the booster seat.
• Lap Belt Positioning: Pull the vehicle's lap belt across your child's upper thighs, ensuring it is snug and low on the hips. It should not rest on the stomach.
• Shoulder Belt Positioning: Pull the vehicle's shoulder belt across your child's chest and shoulder. Use the red belt guide on the high-back booster or the included belt positioning clip for the backless booster to ensure the belt is centered on the shoulder and not touching the neck or falling off the shoulder.
• Tighten Belt: Pull the shoulder belt to remove any slack from both the lap and shoulder portions of the vehicle's seat belt.
• カップホルダー: Utilize the dual-integrated cup holders for beverages or small snacks.


画像: クローズアップ view of one of the dual cup holders on the Evenflo GoTime LX Booster Car Seat, shown with a small snack pouch inside.

メンテナンス

Regular cleaning and maintenance will help prolong the life of your Evenflo GoTime LX Booster Car Seat.

• 生地のお手入れ: The padded seat cover is removable and machine-washable. Refer to the care label on the fabric for specific washing instructions. Typically, use cold water on a gentle cycle and tumble dry on low heat or air dry.
• プラスチック部品: プラスチック部品は柔らかい布と中性洗剤、水で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
• Buckle and Latch: Periodically check the buckle and belt path for debris. Clean with a damp 必要に応じて布で拭いてください。潤滑剤は使用しないでください。
• 検査： Regularly inspect the booster seat for any signs of wear, damage, or missing parts. If any damage is found, discontinue use and contact customer support.

トラブルシューティング

If you encounter issues with your Evenflo GoTime LX Booster Car Seat, refer to the following common solutions:

• Loose Fit in Vehicle: Ensure the booster seat is placed flush against the vehicle's seat back. Verify that the vehicle's seat belt is routed correctly through all guides and pulled taut.
• Shoulder Belt Not Fitting Correctly: Adjust the headrest height to ensure the shoulder belt guide is just above your child's shoulders. For backless mode, ensure the belt positioning clip is used to correctly position the shoulder belt.
• ヘッドレストの調整が難しい: Check for any obstructions or debris in the adjustment mechanism. Ensure the adjustment handle is fully engaged when attempting to move the headrest.
• バックルの固着: バックル機構を洗浄するamp cloth to remove any food crumbs or debris. Do not use oils or lubricants.
• 子供の不快感: Re-check all belt routings and headrest height to ensure they are appropriate for your child's size. Ensure the seat is free of any foreign objects.

仕様

Image: The Evenflo GoTime LX Booster Car Seat with its key dimensions (depth, width, height) clearly indicated.

保証とサポート

メーカー保証: The Evenflo GoTime LX Booster Car Seat comes with a 90-day limited manufacturer's warranty. Please retain your proof of purchase for warranty claims.

カスタマーサポート: For assistance with installation, troubleshooting, or any other inquiries, Evenflo offers ParentLink® customer service. You can access real-time online help, including live video support with a certified car seat safety technician, to ensure proper vehicle installation and address any concerns.

詳細については、Evenfloの公式ウェブサイトをご覧ください。 webサイトをご覧いただくか、カスタマー サービスに直接お問い合わせください。