スモールリグ 5855

SMALLRIG 4.5" Suction Cup Camera Mount with Ball Head Magic Arm (Model 5855) Instruction Manual

This manual provides detailed instructions for the proper setup, operation, and maintenance of your SMALLRIG 4.5" Suction Cup Camera Mount with Ball Head Magic Arm, Model 5855.

1. はじめに

The SMALLRIG 4.5" Suction Cup Camera Mount is designed for secure attachment of action cameras to smooth, non-porous surfaces such as car windshields, windows, and other vehicle body panels. It features a robust suction mechanism and a flexible ball head magic arm for versatile camera positioning, making it ideal for motion photography and various filming scenarios.

This mount is compatible with a wide range of action cameras, including GoPro 13/12/11/10/9/8/7 Black, Insta360 X5/X4/X3/X2, DJI Osmo Action 5 Pro/4/3, and Osmo Pocket 3/Pocket 2.

2. パッケージ内容

パッケージに以下のすべてのコンポーネントが含まれていることを確認してください。

  • 4.5" Suction Cup Support × 1
  • Ball-Head Magic Arm × 1
  • アクションカメラマウント×1
  • Flat Wrench × 1
SMALLRIG 4.5 inch Suction Cup Mount package contents including suction cup, magic arm, action camera adapter, and flat wrench.

Image: Contents of the SMALLRIG 4.5" Suction Cup Camera Mount package.

3.製品オーバーview

Familiarize yourself with the main components of the suction cup mount:

Detailed diagram of the SMALLRIG 4.5 inch Suction Cup Mount showing its components: 1/4 inch -20 Locating Hole, Action Camera Mount, Magic Arm, Air Pump Button, Release Tabs, and Suction Cup Dust Cover.

画像: 詳細 view of the SMALLRIG 4.5" Suction Cup Mount components.

  • 吸盤ベース: Provides strong vacuum suction to smooth surfaces.
  • Air Pump Button: Used to create vacuum pressure for secure attachment.
  • Release Tabs: Used to release vacuum pressure for easy removal.
  • Ball Head Magic Arm: Allows for flexible positioning and angle adjustment of the camera.
  • アクションカメラマウント: Adapter for attaching action cameras.
  • 1/4''ネジ: Standard screw for attaching various camera accessories.

4. セットアップとインストール

4.1 表面処理

For optimal adhesion and safety, ensure the mounting surface is clean, dry, and flat. Avoid rough, wet, uneven, or fragile surfaces. Dust, dirt, or moisture can significantly reduce suction strength. If attaching to surfaces with protective films, exercise caution and verify compatibility.

4.2 吸盤の取り付け

  1. Place the suction cup firmly against the prepared surface.
  2. Press the air pump button repeatedly until the white marking line on the pump is no longer visible. This indicates that sufficient vacuum pressure has been achieved for secure attachment.
Illustration showing how to press the air pump button on the SMALLRIG 4.5 inch Suction Cup Mount for secure vacuum installation.

Image: Pressing the air pump button for secure installation.

4.3 カメラの取り付け

Attach your action camera to the action camera mount using the provided adapter. Then, connect the action camera mount to the ball head magic arm. Securely tighten all connections to prevent movement during use.

5. 操作

5.1 角度の調整

The ball head magic arm allows for flexible multi-angle adjustment. Loosen the knob on the magic arm to adjust the camera to your desired angle, then tighten the knob firmly to lock it in place.

Illustration demonstrating the flexible multi-angle adjustment of the SMALLRIG 4.5 inch Suction Cup Mount using its double ball heads.

Image: Flexible multi-angle adjustment of the camera mount.

5.2 Removing the Suction Cup

To remove the suction cup, simultaneously pull up on the two rubber tabs located on the edge of the suction cup base. This will release the vacuum pressure, allowing for easy detachment from the surface.

6. メンテナンス

  • Always keep the suction cup base and filter foam clean and intact. Any debris can compromise the suction seal.
  • When not in use, attach the included dust cover to the suction cup to prevent contamination and extend the product's lifespan.
  • マウントは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。

7。 トラブルシューティング

  • 吸引力の低下: If the white marking line on the air pump reappears, it indicates a loss of vacuum pressure. Immediately pump the valve again until the line disappears to restore secure suction.
  • マウントが固まらない: Ensure the mounting surface is perfectly clean, dry, and smooth. Avoid textured or porous surfaces. Check the suction cup base for any damage or debris.
  • Adhesion Status: For safety, check the adhesion status every 2 hours during operation, especially in dynamic environments like moving vehicles.
  • 製品の損傷: Discontinue use if the suction cup base or filter foam is damaged, as this can lead to unexpected detachment and potential damage to your camera.
Important notes for the SMALLRIG 4.5 inch Suction Cup Mount, emphasizing use on clean, dry, flat surfaces, keeping the base clean, repumping if the safety line shows, caution with protective films, and regular adhesion checks.

Image: Important safety and usage notes for the suction cup mount.

8. 仕様

特徴詳細
ブランドスモールリグ
モデル番号5855
材料Aluminum Alloy, Nitrile Rubber, ABS, Stainless Steel
Weight Capacity (Dynamic)1.5 kg (3.3 ポンド)
Vertical Suction (Static)30キロ
Horizontal Suction (Static)60キロ
製品寸法137.5×117.6×55.0mm（5.4×4.6×2.2インチ）
正味重量438.0 ± 5.0 g (15.4 ± 0.2 オンス)
取り付けタイプOne-Touch Press
対応デバイスAction Cameras (GoPro, Insta360, DJI Osmo Action)
Diagram showing the dimensions of the SMALLRIG 4.5 inch Suction Cup Mount and the action camera adapter.

画像: 製品の寸法と仕様。

9. 保証とサポート

この製品には、 2年間のメーカー保証. For warranty claims or technical support, please contact SMALLRIG customer service through their official webサイトまたは小売業者。

For additional resources and product information, visit the official SMALLRIG webサイト： www.smallrig.com