GUTA RVタイヤ空気圧監視システム（モデルGT60）取扱説明書

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your GUTA RV Tire Pressure Monitoring System (TPMS) Model GT60. This system is designed to enhance driving safety by providing real-time tire pressure and temperature data for RVs, trailers, large trucks, and 5th wheels. It features a 7-inch full-color LCD display, solar and USB-C charging options, and supports up to 16 tires with 6 distinct alarm modes.

箱の中身

• 1 * Monitor
• 1 * Signal Booster
• 4 * Sensors
• USB-Cケーブル1本
• Accessories (e.g., anti-theft nuts, wrench, sensor location stickers)

Image: The GUTA GT60 monitor, signal booster, and four cap-style tire pressure sensors.

設定

Sensor Pairing Guide

The sensors included in your package are pre-paired at the factory. However, if you need to re-pair sensors or add new ones, follow these steps. It is recommended to watch the setup video for a visual guide.

1. 準備： Before pairing, attach the provided sensor location stickers to each sensor (e.g., F1 for Front Left, T1-1 for Trailer 1, Tire 1). Ensure other sensors are kept at least two feet away to prevent incorrect pairing.
2. Turn On Monitor: Long press the "+" and "-" buttons simultaneously for 3 seconds to power on the monitor.
3. ペアリングモードに入る： Long press the "CODE" button for 3 seconds until the display shows "CODE" and the tire positions are ready for pairing.
4. Select Tire Position: Use the "+" or "-" buttons to navigate and select the specific tire position you wish to pair. The selected position will flash.
5. ペアセンサー: Place the corresponding sensor (e.g., F1) on the upper right side of the monitor. Short press the "CODE" button. The monitor will beep, and the pressure reading for that position will appear, indicating successful pairing.
6. 繰り返す： Repeat steps 4 and 5 for all remaining sensors. If a tire position does not require a sensor, use the "+" or "-" buttons to skip it.
7. 設定を保存: After pairing all desired sensors, long press the "CODE" button for 3 seconds to save the settings and exit pairing mode. The monitor will return to standby mode.

センサーの取り付け

Once sensors are paired, they can be installed on the corresponding tire valve stems.

1. Ensure tires are inflated to their recommended pressure.
2. Remove the original valve cap from the tire stem.
3. Screw on the anti-theft nut (if included) onto the valve stem.
4. Screw the GUTA sensor onto the valve stem until it is snug.
5. Tighten the anti-theft nut against the sensor using the provided wrench.
6. すべてのタイヤについて繰り返します。

Image: A GUTA cap sensor being securely installed on a tire valve stem.

信号ブースターの取り付け (オプション)

For extended rigs, multi-axle trailers, or oversized RVs, the included signal booster can be installed to ensure stable and accurate signal reception.

• Mount the signal booster in a central location between the monitor and the furthest sensors, ensuring it has a clear line of sight if possible.
• Connect the signal booster to a 12V power source.

Image: Illustration of the signal path from sensor to repeater to display, demonstrating long-range capability.

Operating Your TPMS

リアルタイム監視ディスプレイ

The GUTA GT60 monitor provides continuous real-time updates of tire pressure and temperature. In normal display mode, pressure and temperature readings will alternate every 5 seconds.

• 7-inch Full-Color LCD: The large display ensures clear visibility of all tire data at a glance.
• 自動明るさ調整: The display automatically adjusts its brightness based on ambient light conditions for optimal visibility day and night.
• 時間表示: The monitor also features a clear time display.
• 単位切り替え： Short press the "SET" button to switch between PSI/Bar for pressure and °C/°F for temperature.

Image: The GUTA GT60 monitor mounted on a dashboard, showing real-time tire data.

画像: 詳細な view of the GUTA GT60's large color LCD display, highlighting its clarity.

アラームモード

The system is equipped with 6 alarm modes to alert you to potential tire issues, ensuring driving safety. Alarm thresholds are automatically configured based on the current pressure upon pairing, with an adjustable range of +25% PSI to -15% PSI of the reference pressure.

• Fast Leak Alert: Warns of rapid pressure loss.
• High-Pressure Alert: Notifies when tire pressure exceeds the set high limit.
• 低気圧警報: Notifies when tire pressure drops below the set low limit.
• 高温警報: タイヤの温度が過度に高くなった場合に警告します。
• センサー低電池警告: Indicates a sensor battery needs replacement.
• Sensor Lost Signal Alert: センサーとの通信が失われた場合に警告を発します。

Image: Visual representation of the six different alarm modes provided by the GUTA GT60 TPMS.

メンテナンス

充電オプション

The GUTA GT60 monitor offers versatile charging solutions to ensure continuous operation.

• ソーラーパネル: The large integrated solar panel (5.94 x 3.31 inches) provides continuous charging in sunlight, reducing the need for manual charging.
• USB-C充電： For periods of low sunlight or extended use, the monitor can be charged via the fast USB-C port.
• バッテリー寿命: A built-in rechargeable lithium battery provides up to 100 hours of operation on a full charge.

Image: The GUTA GT60 monitor highlighting its dual power solutions: solar charging and USB-C charging.

センサーバッテリーの交換

When a sensor low battery alert is triggered, the sensor battery needs to be replaced.

• Each sensor uses a CR2032 battery.
• センサーcを慎重に開けるasing using a small tool.
• 古い CR2032 電池を取り外し、正しい極性を確認して新しい電池を挿入します。
• センサーcを閉じるasing securely to maintain its waterproof and dustproof integrity.

Image: Demonstration of replacing batteries in both the monitor (AAA) and a tire sensor (CR2032).

トラブルシューティング

This section addresses common issues and how to resolve them.

Deleting a Single Sensor ID

If you need to remove a specific sensor from the system, follow these steps:

1. ペアリングモードに入る： Long press the "CODE" button for 3 seconds.
2. Select Sensor to Delete: Use the "+" or "-" buttons to navigate to the tire position of the sensor you wish to delete.
3. Delete ID: Long press the "-" button to delete the current tire sensor ID. The display for that position will show dashes.
4. 設定を保存: Long press the "CODE" button for 3 seconds to save the changes and exit pairing mode.

Deleting All Sensor IDs

To clear all paired sensors from the monitor, follow these steps:

1. ペアリングモードに入る： Long press the "CODE" button for 3 seconds.
2. Delete All IDs: Long press both the "+" and "-" buttons simultaneously for 3 seconds. All tire positions on the display will show dashes.
3. 設定を保存: Long press the "CODE" button for 3 seconds to save the changes and exit pairing mode.

信号損失

If a sensor signal is lost, ensure the sensor battery is not depleted. For long vehicles, verify the signal booster is correctly installed and powered. Repositioning the booster or monitor may improve signal strength.

仕様

保証とサポート

For warranty information, technical support, or any inquiries regarding your GUTA RV Tire Pressure Monitoring System, please refer to the contact information provided with your product packaging or visit the official GUTA website. Ensure you have your model number (GT60) and purchase details available when contacting support.